sodcalculator

10 Tech How-To

Backup Synology NAS to External USB Drive

Guide 10-47571 · Updated · Step by step

This guide walks you through creating a reliable backup of your Synology NAS to an external USB drive using the built-in Hyper Backup tool. You’ll learn how to set up a one-time or scheduled backup, restore files when needed, and avoid common pitfalls. Before starting, ensure your Synology DSM is updated and you have a USB drive with enough free space for your data.

What You’ll Need

  • A Synology NAS running DSM 6.0 or later (the steps are similar for DSM 7.x).
  • An external USB drive (USB 3.0 recommended for speed) formatted as ext4, exFAT, FAT32, or NTFS. For best compatibility with Hyper Backup, ext4 is preferred.
  • Enough free space on the USB drive to hold at least the size of the data you want to back up (plus room for versions if you enable them).
  • Administrator access to the Synology DSM interface.

Step-by-Step

  1. Connect the USB drive to a USB port on your Synology NAS. Wait a few seconds for DSM to detect it. You can verify it appears under Control Panel > External Devices.
  2. Open Hyper Backup from the DSM main menu. If it’s not installed, go to Package Center, search for “Hyper Backup,” and install it.
  3. Click “+” in the lower-left corner to create a new backup task.
  4. Select “Local & USB” as the backup destination type, then click Next.
  5. Choose the USB drive from the drop-down list. If you want to store the backup in a subfolder, click the folder icon to create or select one. Click Next.
  6. Select the folders and applications you want to back up. You can check individual shared folders (e.g., Home, Music, Documents) or select “All shared folders.” Click Next.
  7. Configure backup settings:
    • Compression: Leave enabled to save space (recommended).
    • Encryption: Optional but recommended if your data is sensitive. Enter a password and store it safely; without it, you cannot restore.
    • Integrity check: Enable to verify the backup after creation (takes extra time but catches errors).
    • Bandwidth limit: Leave as “No limit” for a local backup.

    Click Next.

  8. Set the backup schedule: Choose “Run backup manually” for a one-time backup, or select “Enable backup schedule” and set daily/weekly times. For a simple external drive backup, a weekly schedule is common. Click Next.
  9. Enable backup rotation (optional): This deletes old versions to prevent the drive from filling up. For example, keep the last 5 versions or retain versions for 30 days. Click Next.
  10. Review the summary and click Done. If you chose manual, the task will appear in the list. Click the task and press Back Up Now to start the first backup.
  11. Monitor the progress in the task list. The status will show “Backing up” and then “Backup succeeded” when finished. You can also check the log in Hyper Backup > Log.
  12. Eject the USB drive safely when you’re done: go to Control Panel > External Devices, select the drive, and click Eject. This prevents data corruption.

Common Mistakes

  • Not checking the backup destination space – If the USB drive is too small, the backup fails mid-way. Always check that the free space is at least 1.5 times the size of the data.
  • Forgetting to enable encryption password recovery – If you encrypt the backup and forget the password, your data is unrecoverable. Store the password in a safe place.
  • Using FAT32 for large files – FAT32 has a 4GB file size limit. If any file exceeds that, the backup will fail. Use ext4 or exFAT instead.
  • Unplugging the USB drive without ejecting – This can corrupt the backup and the drive. Always eject via DSM.
  • Not testing the restore – A backup is only useful if you can restore from it. Periodically test by restoring a small folder to a different location.
  • Overwriting the same backup task – If you create a new task to the same folder, it may overwrite previous versions. Use a different folder or enable rotation.

Tips

  • Use a USB 3.0 drive – It significantly speeds up the backup process, especially for large data.
  • Label your USB drive – Write the date and contents on the drive label so you know what’s on it.
  • Keep the USB drive disconnected – For security and to avoid wear, keep the drive unplugged when not backing up. Plug it in only for scheduled backups.
  • Enable “Backup rotation” – This automatically deletes old versions, preventing the drive from filling up over time.
  • Use “Integrity check” – It ensures your backup is not corrupted, but it doubles the backup time. Run it manually after major changes.
  • Consider a second USB drive – Rotate between two drives to protect against physical damage or theft.

Troubleshooting

  • Backup fails with “Destination not writable” – Check that the USB drive is not full and that it’s formatted in a supported file system. Try reformatting it to ext4 (backup any existing data first).
  • Backup is very slow – If you’re using a USB 2.0 port, switch to a USB 3.0 port. Also, close other heavy tasks on the NAS. If the drive is NTFS, consider converting to ext4 for better performance.
  • USB drive not detected – Try a different USB port. If it’s still not detected, check if the drive works on a computer. If it does, try reformatting it to a supported file system.
  • Hyper Backup says “Backup failed” without a clear reason – Check the log in Hyper Backup > Log. Common causes include file permission issues or a file that’s locked. Try running the backup again after a reboot.
  • Cannot restore from the backup – Ensure you have the correct encryption password. If you didn’t use encryption, check that the USB drive is connected and the backup folder is intact. If the drive is corrupted, try using the “Check backup integrity” option in Hyper Backup.
  • Backup task disappears after reconnecting the USB drive – This can happen if the drive’s mount point changes. Reconnect the drive, then edit the task and reselect the destination folder.

Frequently Asked Questions

Can I back up to a USB drive that is also used for Time Machine?

Yes, you can use the same drive, but create a separate folder for each backup type. Hyper Backup and Time Machine can coexist as long as the drive is formatted with a supported file system (e.g., ext4 or APFS for Time Machine).

How do I restore a single file from the USB backup?

Open Hyper Backup, select your backup task, and click the “Restore” button. Choose “Restore specific files” and browse the file tree to select the file you need. It will be restored to its original location or a custom one.

Does the backup include installed packages and system settings?

Yes, Hyper Backup can back up system settings and certain packages (like Synology Drive, Note Station, etc.) if you select them in the backup source. However, not all packages are supported; check the Hyper Backup compatibility list.

Can I schedule the backup to run when the USB drive is connected?

Yes, in the schedule settings, you can choose “Run backup when the external drive is connected” instead of a fixed time. This is handy if you plug in the drive only occasionally.

What happens if the USB drive is unplugged during a backup?

The backup will fail and may leave incomplete data. Hyper Backup will mark the task as failed. You can simply reconnect the drive and run the backup again; it will resume from where it left off if the drive is intact.

Is it safe to use the same USB drive for multiple NAS backups?

Yes, but each backup task should use a separate folder on the drive. Avoid mixing different NAS backups in the same folder to prevent conflicts.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →