sodcalculator

10 Tech How-To

Backup Windows 10 to External Hard Drive or Network Drive

Guide 10-43573 · Updated · Step by step

This guide walks you through creating a full backup of your Windows 10 PC to either a directly attached external hard drive or a network drive (like a NAS or another computer’s shared folder). You’ll use the built-in Backup and Restore (Windows 7) tool, which still works in Windows 10 and creates a system image plus file backups. Before you start, make sure your external drive has enough free space (at least as much as the data you’re backing up, ideally more), and that a network drive is already mapped or accessible from File Explorer.

What You’ll Need

  • An external hard drive with enough free space (USB, eSATA, or Thunderbolt) or a network drive with write access.
  • Administrator account on the Windows 10 PC.
  • For network backups: the network drive must be already mapped to a drive letter (e.g., Z:) or accessible via UNC path (e.g., \\NAS\Backup).

Step-by-Step

  1. Connect and prepare the destination. Plug in your external hard drive and make sure it appears in File Explorer. For a network drive, open File Explorer, click “This PC,” then “Map network drive” to assign a drive letter if you haven’t already.
  2. Open Backup and Restore. Click the Start button, type “Backup and Restore (Windows 7)” into the search box, and press Enter. This opens the classic backup tool that still works in Windows 10.
  3. Set up backup. On the right side, click “Set up backup.” If prompted by User Account Control, click Yes.
  4. Choose where to save. You’ll see a list of available locations. Select your external drive from the list. If you’re using a network drive, click “Save on a network…” and type the UNC path (e.g., \\Server\Backup) or browse to it. You’ll need to provide credentials if prompted. Click Next.
  5. Choose what to back up. Select “Let Windows choose” to back up all data files, a system image, and create a recovery drive (recommended for most users). Or choose “Let me choose” to select specific folders, libraries, and whether to include a system image. Click Next.
  6. Review and start. Check the backup settings summary. If you want to change the schedule, click “Change schedule” and set how often (e.g., daily at 7 PM). Click “Save settings and run backup.”
  7. Wait for the first backup to finish. The first backup can take a long time depending on data size. You’ll see a progress bar. You can continue using your computer, but avoid turning it off until it’s done.
  8. Verify the backup. After completion, open the destination drive. You should see a folder named “WindowsImageBackup” (if a system image was included) and possibly a folder with your computer’s name for file backups. Check that the files are there.
  9. Run future backups automatically. Once scheduled, Windows will back up automatically. To manually start a backup later, open Backup and Restore and click “Back up now.”

Common Mistakes

  • Choosing a drive that’s too small. If the external drive has less free space than your data, the backup will fail partway. Always check the size of your C: drive and compare with available space.
  • Disconnecting the drive during backup. Pulling the USB cable or losing network connection mid-backup can corrupt the backup files.
  • Not enabling the system image. If you only back up files, you won’t be able to restore Windows itself after a crash. Include the system image.
  • Using a drive that’s formatted with FAT32. Windows Backup requires NTFS. If your drive is FAT32, you’ll get an error. You’ll need to reformat it (which erases data) or use a different drive.
  • Ignoring the schedule. If you don’t set a schedule, you’ll only have one backup. Set a regular schedule to keep your backup current.

Tips

  • Use a drive with at least 1.5x the space of your used data. This gives room for future backups and system image growth.
  • Keep the external drive disconnected when not backing up. This protects against ransomware and power surges.
  • For network backups, use a wired connection if possible. Wi-Fi can be slow and drop mid-backup.
  • Label your backup drive. Write the date and what’s on it to avoid mixing it up with other drives.
  • Test a restore. Once in a while, try restoring a single file from the backup to make sure it works.

Troubleshooting

  • “The drive is not a valid backup location” error. This usually means the drive is formatted with FAT32 or is a network drive that isn’t mapped. Reformat the external drive to NTFS (right-click drive in File Explorer > Format > NTFS), or map the network drive to a letter.
  • Backup fails with error 0x8078002A or 0x807800C5. These are often caused by disk errors. Run chkdsk /f on the source and destination drives (open Command Prompt as admin). Also, disable any third-party antivirus temporarily.
  • Network backup is very slow or times out. Try copying a large file to the network drive manually to test speed. If it’s slow, the network or the NAS is the bottleneck. Consider using a direct USB drive instead.
  • Backup stops at 99% and never finishes. This can happen if a file is locked by another program. Close all open programs, especially Outlook and Word. Also, check that the destination drive isn’t full.
  • Can’t see the external drive in the list. Make sure the drive is connected and recognized in File Explorer. If it’s a new drive, it may need to be initialized and formatted first (right-click Start > Disk Management).

Frequently Asked Questions

Can I back up to a network drive using this method?

Yes. When setting up backup, choose “Save on a network…” and enter the UNC path. The drive must be accessible and you’ll need credentials.

How long does the first backup take?

It depends on the amount of data and the speed of the destination. A few hundred GB can take several hours. Subsequent backups are incremental and faster.

Will the backup include my installed programs?

The system image includes Windows, programs, and settings. However, you can’t restore individual programs from it; you’d restore the whole system. For files, you can restore them individually.

Can I use a USB flash drive instead of an external hard drive?

Technically yes, but not recommended. Flash drives are slower and wear out quickly with continuous writes. Windows Backup may also refuse to use small drives.

How do I restore from this backup?

Go to Settings > Update & Security > Recovery > Advanced startup > Restart now. Then choose Troubleshoot > Advanced options > System Image Recovery. Or use the recovery drive you created.

Is this the same as File History?

No. File History is a separate feature for backing up personal files to an external drive. Backup and Restore (Windows 7) creates a full system image and file backups.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →