FaceTime’s Portrait mode blurs the background behind you, keeping the focus on your face during video calls. It works on iPhone models with an A12 Bionic chip or newer (iPhone XS, XR, and later) running iOS 15 or later. You can turn it on before or during a call, and it’s especially useful for hiding a messy room or adding a more professional look.
What You’ll Need
- An iPhone or iPad with a TrueDepth camera (Face ID) or a compatible A12 Bionic chip or newer. Supported devices include iPhone XS, XR, 11, 12, 13, and later, as well as iPad Pro 11-inch and 12.9-inch (3rd generation and later).
- iOS 15 or iPadOS 15 (or later) installed.
- FaceTime enabled in Settings > FaceTime.
Step-by-Step
- Open FaceTime on your iPhone or iPad.
- Start a video call with any contact, or use the FaceTime link feature to join a call from a web browser on another device.
- During the call, swipe down from the top-right corner of the screen to open Control Center. (On older iPhones with a Home button, swipe up from the bottom edge.)
- Tap the “Video Effects” button (it looks like a person inside a rectangle with a small star). It’s at the top of the Control Center panel.
- Tap “Portrait” in the list of effects. It will highlight to show it’s active. You should immediately see your background blur behind you.
- Tap anywhere outside the panel to close Control Center and return to your call.
- To turn it off, repeat the same steps and tap “Portrait” again to deactivate it.
Alternatively, you can enable Portrait mode before the call starts, but only if you’re using the FaceTime app directly (not a link):
- Before dialing, in the FaceTime app, tap the “Video Effects” button (the same icon) at the top of the screen.
- Tap “Portrait” to turn it on, then make your call as usual.
Common Mistakes
- Using an unsupported device: Portrait mode requires a device with a TrueDepth camera or an A12 Bionic chip or newer. If you don’t see the option, your device may not support it.
- Looking for a button in the FaceTime toolbar: The Portrait effect is not in the main FaceTime controls (like mute or camera flip). It’s hidden in Control Center’s Video Effects menu.
- Forgetting to turn it on before the call: While you can enable it during a call, some users expect it to be automatic. It’s not; you have to manually activate it each time.
- Using it in a group call: Portrait mode works in group FaceTime calls too, but it may not blur everyone’s background simultaneously. It only affects your own video feed.
Tips
- Good lighting helps: The blur effect works best when your face is well-lit and there’s some contrast between you and the background. Avoid sitting with a bright window behind you.
- Keep the camera at eye level: The effect is more convincing when the camera is roughly at eye level, so the phone or tablet is not too low or high.
- Test before an important call: Do a quick FaceTime call with a friend to see how the blur looks with your lighting and background. Adjust if needed.
- Use it with other effects: You can combine Portrait mode with other video effects like reactions (hearts, thumbs up) or filters. They stack fine.
- Turn it off to save battery: Portrait mode uses additional processing, which can drain battery faster. If you’re on a long call, consider turning it off when not needed.
Troubleshooting
Portrait option is grayed out or missing:
- Make sure your device is supported (iPhone XS or later, or iPad Pro 3rd gen or later).
- Check that you’re running iOS 15 or later: go to Settings > General > Software Update.
- Restart your device. A simple restart often resolves temporary glitches.
The blur doesn’t appear when I tap Portrait:
- Ensure you’re using a video call, not an audio-only call. Portrait mode only works for video.
- If you’re using a FaceTime link from a web browser (on a Mac or PC), Portrait mode is not available. It only works in the FaceTime app on iPhone/iPad.
- Check if you have any other video effect that conflicts. Turn off any active filters or reactions, then try again.
The blur is too strong or weak:
- Portrait mode on FaceTime does not have a manual adjustment slider. The strength is automatic based on the scene. Move slightly closer to the camera or change your position relative to the background.
It works in the FaceTime app but not in other apps:
- Portrait mode is specific to FaceTime. Other video calling apps (like Zoom or WhatsApp) have their own blur features, often in their own settings.
Frequently Asked Questions
Can I blur my background on FaceTime on an iPhone 8?
No. The iPhone 8 does not have the A12 Bionic chip or a TrueDepth camera, so Portrait mode is not available. You need at least an iPhone XS or XR.
Does Portrait mode work in group FaceTime calls?
Yes, it works in group calls, but it only blurs your own background. Other participants can also enable it individually if their devices support it.
Can I use Portrait mode with a FaceTime link on a Windows PC?
No. The FaceTime link feature for web browsers does not support Portrait mode. It’s only available in the FaceTime app on iPhone, iPad, and Mac (macOS Monterey or later).
Why does my background sometimes not blur completely?
Portrait mode uses depth information from the camera. If you’re in low light or if there’s a complex background (like a busy pattern), the effect may not be perfect. Improving lighting and keeping a simple background helps.
Does Portrait mode work with the rear camera?
Yes, it works with both front and rear cameras, but it’s most effective with the front TrueDepth camera. On some devices, the rear camera may produce a less dramatic blur.
Will Portrait mode drain my battery faster?
It can, because it uses additional processing power. On a long call, you might notice faster battery drain. Turning it off when you don’t need it can help.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Windows Not Saving Remote Desktop Credentials
- Fix Error 0x8007025d in Windows 10
- Fix Alexa App Stuck on Setup
- Android Camera for 7 Office Tasks: Step-by-Step
- Pair Phone to Pioneer Stereo After Bluetooth Reset
- Essential Tips for macOS Users Switching to Windows