sodcalculator

10 Tech How-To

How to Boot from USB Drive on Windows

Guide 10-48157 · Updated · Step by step

Booting from a USB drive lets you start your Windows computer from a portable device instead of the internal hard drive. This is essential for installing a fresh copy of Windows, running a live Linux environment, or using diagnostic and recovery tools. Before you begin, make sure the USB drive is bootable (contains the operating system or tool), and that you know your computer’s boot menu key or BIOS/UEFI access key.

What You’ll Need

  • A bootable USB drive (created with tools like Rufus, Windows Media Creation Tool, or Etcher).
  • Your computer’s power cord plugged in (especially for laptops).
  • Access to the BIOS/UEFI setup or boot menu (usually via a key like F2, F12, Del, or Esc).

Step-by-Step

  1. Insert the USB drive into a USB port on your computer. Use a port directly on the motherboard (back of desktop, side of laptop) if possible, as front ports may not be recognized during boot.
  2. Restart your computer. If it’s already on, save any work and reboot.
  3. Press the boot menu key repeatedly as soon as the computer restarts. Common keys are F12 (Dell, Lenovo), F11 (MSI), F9 (HP), Esc (ASUS, some HP), or F8 (older models). If you don’t know yours, look for a brief message like “Press F12 for Boot Menu” on the splash screen.
  4. Select the USB drive from the boot menu. It may appear as “USB Hard Drive,” “Removable Devices,” or with the brand name of the USB stick. Use arrow keys to highlight it and press Enter.
  5. If the boot menu doesn’t work, you’ll need to enter the BIOS/UEFI setup. Restart and press the setup key (often Del, F2, or F10). Once inside, look for a “Boot” or “Startup” tab.
  6. Change the boot order so the USB drive is first. Use the +/- keys or F5/F6 to move it to the top. Some UEFI systems show a “Boot Priority” list where you can drag the USB device.
  7. Save and exit. Press F10 (or select “Save and Exit”) and confirm. The computer will restart and should boot from the USB.
  8. Wait for the boot process. You may see a message like “Press any key to boot from USB…” – if so, press a key quickly. The operating system or tool on the USB will then load.

Common Mistakes

  • USB not bootable: The drive must have a proper bootable image written to it, not just files copied. Use a tool like Rufus or the official Media Creation Tool.
  • Wrong boot key: Pressing the wrong key or not pressing it early enough. Watch the splash screen for the correct key.
  • USB port issues: Plugging into a USB 3.0 port that isn’t recognized during early boot. Try a USB 2.0 port (often black) or a different port.
  • Secure Boot / UEFI settings: If the USB is not UEFI-bootable, you may need to disable Secure Boot or enable Legacy/CSM boot mode.
  • Fast Boot enabled: Fast Boot may skip the boot menu. Temporarily disable it in BIOS/UEFI or use the Windows “Restart” option while holding Shift to access advanced startup.

Tips

  • Test the USB on another computer to ensure it’s bootable before troubleshooting your main machine.
  • Use a USB 2.0 port for maximum compatibility with older boot loaders.
  • Keep the bootable USB plugged in during the entire process, as some tools need to read from it after initial boot.
  • If you’re installing Windows, you can use the Windows Media Creation Tool to create a bootable USB that works on both UEFI and Legacy systems.
  • For Linux live USBs, tools like Rufus can write in DD mode for better compatibility.

Troubleshooting

Computer boots to Windows instead of USB: This usually means the boot order is wrong or the USB isn’t recognized. Reboot, enter the boot menu, and explicitly select the USB. If it’s not listed, try a different port or recreate the USB with a different tool.

“No bootable device found” error: The USB isn’t bootable or the boot mode (UEFI vs Legacy) doesn’t match. Check if your USB was created for UEFI or BIOS. In BIOS/UEFI, try switching between UEFI and Legacy/CSM mode. Also ensure the USB has a valid boot sector.

Black screen or freeze after selecting USB: This could be a corrupted USB image or incompatible boot mode. Recreate the USB with a fresh download and try again. Also, try disabling Secure Boot temporarily.

USB not detected in BIOS: Make sure the USB is plugged in before powering on. Some BIOS versions don’t support USB 3.0 during boot, so use a USB 2.0 port. Also, check if “USB Legacy Support” or “USB Boot” is enabled in BIOS.

Boot menu key not working: If the key isn’t responding, try a different key (common ones are F12, F11, F9, Esc). You can also access the boot menu from Windows: go to Settings > Update & Security > Recovery > Advanced startup > Restart now, then choose “Use a device.”

Frequently Asked Questions

How do I make a USB drive bootable?

Use a tool like Rufus (Windows) or balenaEtcher (cross-platform). Select your USB drive, choose the ISO file of the OS, and click Start. For Windows, you can use the official Media Creation Tool.

Can I boot from USB on any Windows computer?

Most computers built in the last 10 years support USB booting. Check your BIOS/UEFI for a “Boot” option and ensure USB is enabled. Some very old systems may not support it.

What is the difference between UEFI and Legacy boot?

UEFI is the modern firmware interface with features like Secure Boot and faster startup. Legacy (or CSM) is the older BIOS mode. Your USB must be formatted with the correct partition scheme (GPT for UEFI, MBR for Legacy) to boot properly.

How do I boot from USB on a Windows 10 or Windows 11 computer?

The process is the same as above. You can also use the Advanced Startup options in Windows: hold Shift while clicking Restart, then go to Troubleshoot > Advanced options > UEFI Firmware Settings, and change boot order there.

Why won’t my computer boot from USB?

Common reasons: USB not bootable, wrong boot mode (UEFI vs Legacy), Secure Boot blocking, or USB port not recognized. Try recreating the USB, using a different port, and adjusting BIOS settings.

Can I boot from USB without changing BIOS settings?

Yes, most computers have a one-time boot menu (usually F12, F11, Esc) that lets you select the USB without permanently changing boot order. This is the easiest method.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →