This guide shows you how to build and display the LEGO PlayStation 2 set (set 10306) while keeping its hidden scenes—the mini dioramas inside the console and controller—intact and visible. You’ll learn the best order to assemble the set, how to position the hidden scenes so they stay accessible, and display techniques that let you show off both the exterior and the interior details without taking the model apart. Before you start, make sure you have a clean, flat workspace, good lighting, and a display shelf or case with enough room for the set’s final dimensions (roughly 12.5 in / 32 cm long, 10 in / 25 cm wide, and 8 in / 20 cm tall).
What You’ll Need
- LEGO PlayStation 2 set (10306) – all bags, instruction booklet, and sticker sheet
- Clean, flat surface (a large table or desk)
- Small parts tray or bowls to sort pieces
- Brick separator (included in the set)
- Display shelf, cabinet, or acrylic case with enough clearance
- Optional: LED strip or small spotlights for accent lighting
- Optional: cotton gloves to avoid fingerprints on clear pieces
Step-by-Step
- Sort the bags by number. The set comes with numbered bags that correspond to building stages. Open only one bag at a time to keep pieces manageable. Pour the contents into a tray or shallow bowl.
- Build the console base and core structure first. Follow the instruction booklet for the main body of the PS2. This includes the dark grey and black panels that form the console’s shell. Make sure all connections are firm—press pieces together until you hear a click.
- Assemble the hidden scenes before enclosing them. The set includes three mini scenes: a living room, a bedroom, and a rooftop. Build each one completely on its own. These are small, so take care to align the tiles and minifigures exactly as shown in the instructions.
- Position the hidden scenes inside the console. When the instructions tell you to insert the scenes, do so gently. The scenes slide into designated slots. Ensure the front of each scene faces the opening of the console. Do not force them—if they don’t fit, check that you haven’t flipped a piece.
- Build the controller and memory card. The controller also contains a small hidden scene. Build it separately and insert the scene before sealing the controller’s two halves. The memory card is a simple build but has a tiny display—keep it clear of dust.
- Add the exterior details and stickers. After the main structure is complete, attach the front panels, the PlayStation logo, and the ports. Apply stickers carefully using tweezers or the brick separator edge to avoid bubbles. Press them down firmly.
- Test the moving parts. The set includes a working disc tray that opens and a controller cable that can be repositioned. Gently move these to ensure they aren’t blocked. If anything sticks, check for misaligned gears or plates.
- Decide on a display orientation. You have two main options: (a) show the console closed, with the hidden scenes concealed, or (b) display it with the top panel removed or the front flap open to reveal the scenes. For a balanced look, consider placing the console at a slight angle with the top open, so both the exterior and interior are visible.
- Place the set on your display surface. Use a shelf that is deep enough to support the entire footprint. If you have an acrylic case, place the set inside. Make sure the surface is level to prevent any pieces from shifting.
- Light the display (optional). Use a small LED strip or a spot light aimed at the open top. Avoid direct sunlight, which can fade colors and make clear pieces yellow over time.
Common Mistakes
- Building the scenes after the shell is closed. If you skip ahead in the instructions, you might find yourself trying to insert a scene through a tiny gap. Always follow the sequence.
- Forcing pieces. LEGO pieces are designed to fit snugly, but if you use excessive force, you can stress or crack the plastic, especially on thin panels. If it doesn’t fit, check the orientation.
- Applying stickers over dust. Dust or fingerprints under a sticker create permanent bubbles. Clean the area with a dry microfiber cloth before applying.
- Displaying in direct sunlight. UV rays can cause white pieces to yellow and stickers to fade. Choose a spot away from windows.
- Handling clear pieces with bare fingers. The transparent parts (like the controller’s screen) show fingerprints easily. Use gloves or hold by the edges.
Tips
- Use the brick separator to disassemble any misaligned parts—it’s gentler than pulling with your hands.
- When inserting hidden scenes, tilt them slightly and then press down to avoid scraping the sides.
- Take a photo of the interior before closing the console—this helps you remember the layout if you ever need to remove the scenes.
- If you plan to display with the top open, use a small acrylic stand to prop the top panel at an angle. This keeps it secure and shows the interior clearly.
- Dust the set regularly with a soft brush or compressed air. Avoid using water or cleaning sprays.
Troubleshooting
- Hidden scene won’t fit into its slot. Check that you haven’t added an extra piece or placed a tile upside down. Compare with the instruction picture. If it still won’t fit, disassemble the scene and rebuild it following the steps exactly.
- The disc tray doesn’t open smoothly. Remove the top panel and check for any loose pieces that might be blocking the rails. Ensure the gear mechanism is aligned—turn the small knob on the back to test.
- Sticker is misaligned. If the sticker is not fully pressed down, you can carefully lift it with tweezers. If it’s stuck, leave it—trying to remove it may tear it. For future stickers, use the brick separator as a guide.
- Clear piece has a scratch. Minor scratches can be polished with a soft cloth and a tiny amount of polycarbonate polish, but test on a hidden area first. Avoid abrasive cleaners.
- The set wobbles on the display shelf. Place a thin felt pad or a sheet of non-slip mat under the console to keep it level and stable.
Frequently Asked Questions
Can I display the set with the hidden scenes visible without breaking it? Yes. The top panel is designed to be removable. Simply lift it off and set it aside or prop it up. The scenes are accessible and can be viewed without any disassembly.
Will the hidden scenes fall out if the set is moved? No, the scenes are secured inside the console with studs and clips. However, if you move the set, hold it from the bottom and keep it level to avoid any pieces shifting.
How do I clean the set without damaging the stickers? Use a soft, dry brush or a can of compressed air. Do not use water or cleaning solutions, as they can loosen the stickers and damage the print.
Is it safe to leave the set in a room with high humidity? LEGO bricks are made of ABS plastic, which is generally resistant to humidity, but prolonged exposure can cause stickers to peel. Keep the set in a dry, climate-controlled room.
Can I build the set in a different order to make display easier? The instruction order is optimized for assembly. If you want to display it open, you can build the console base and the scenes first, then attach the top panel loosely. But following the manual is the safest way to avoid mistakes.
What if I lose a piece? Check the spare parts included in the set. If it’s a unique piece, you can order replacements from LEGO’s official customer service (not affiliated with this guide).
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Windows 11 Calendar Wrong Day? Fix It Here
- How to Use curl Command in Linux
- Install ChromeOS: Convert Laptop to Chromebook
- Fix OneNote App Not Working on Android
- Move Games to SSD Without Reinstalling
- Move Windows 11 Taskbar to Top or Side: Easy Steps