This guide walks you through creating a bootable Windows 10 USB drive using Rufus, a free and popular tool. You’ll need a Windows 10 ISO file, a USB drive (8 GB or larger), and a Windows PC to run Rufus. By the end, you’ll have a USB drive that can install Windows 10 on any compatible computer.
What You’ll Need
- A Windows 10 ISO file (download from Microsoft’s official website)
- A USB drive with at least 8 GB capacity (all data on it will be erased)
- A Windows PC to run Rufus (Windows 7 or later)
- Rufus software (download from the official Rufus website)
Step-by-Step
- Download Rufus – Go to the official Rufus website (rufus.ie) and download the latest portable version (the .exe file). No installation is needed; just run it.
- Insert your USB drive – Plug the USB drive into your computer. Make sure it has no important data, as it will be completely erased.
- Launch Rufus – Double-click the Rufus executable. If Windows shows a security warning, click “Yes” to allow it to run.
- Select your USB drive – In the “Device” dropdown at the top, choose your USB drive. Be careful to select the correct one, especially if you have multiple drives connected.
- Select the ISO file – Click the “SELECT” button next to “Boot selection.” Browse to your Windows 10 ISO file and select it. Rufus will automatically detect the correct partition scheme and file system for UEFI or BIOS.
- Set the partition scheme – For most modern computers, leave “GPT” and “UEFI (non CSM)” as the defaults. If you’re installing on an older BIOS-based PC, choose “MBR” and “BIOS or UEFI-CSM.” If you’re unsure, check your computer’s firmware settings.
- Adjust other settings – Leave the file system as “NTFS” (default) unless you have a specific reason to change it. The cluster size and volume label can stay as defaults. Rufus will automatically set the correct options for the ISO.
- Start the process – Click the “START” button at the bottom. Rufus may ask you to download additional files (like WinPE) – click “Yes” if prompted.
- Confirm the warning – Rufus will warn you that all data on the USB drive will be destroyed. Click “OK” to proceed. The process will take a few minutes, depending on your USB speed and ISO size.
- Wait for completion – The progress bar will show the writing process. When it’s done, you’ll see a green “READY” status. You can now safely remove the USB drive and use it to install Windows 10.
Common Mistakes
- Choosing the wrong USB drive – This is the most common error. Double-check the drive letter and capacity in Rufus before starting.
- Using a USB drive that’s too small – Windows 10 ISO is about 5 GB, so an 8 GB drive is the minimum. A 16 GB or larger drive is safer.
- Not backing up data – The USB drive will be wiped. Always back up any important files beforehand.
- Incorrect partition scheme – If you choose GPT for an old BIOS system, or MBR for a UEFI-only system, the USB won’t boot. Check your computer’s firmware mode.
- Interrupting the process – Do not unplug the USB or close Rufus while writing. This can corrupt the drive.
Tips
- Use a USB 3.0 port – Writing and later booting will be faster on USB 3.0 ports (usually blue).
- Download the ISO from Microsoft – Use the official Media Creation Tool to get the latest Windows 10 ISO. Third-party sources may be outdated or contain malware.
- Check the USB drive health – If the process fails repeatedly, try a different USB drive or format it first (using Rufus’s “Format” option).
- Keep Rufus updated – Newer versions support the latest Windows ISOs and fix bugs.
- Test the USB drive – If possible, test the bootable USB on a spare computer before using it on your main machine.
Troubleshooting
Rufus says “Access is denied” or “Device is in use” – Close any programs that might be using the USB drive (like File Explorer). If that doesn’t work, restart your computer and try again.
The process fails with “Error: 0x80070005” or similar – This often indicates a permissions issue. Right-click Rufus and select “Run as administrator.”
The USB drive is not detected – Try a different USB port. If it’s still not recognized, check if the drive appears in Windows Disk Management. If not, the drive may be faulty.
The USB doesn’t boot after creation – First, check your computer’s boot order in BIOS/UEFI. Make sure USB boot is enabled and the USB is set as the first boot device. If it still doesn’t boot, redo the process with the correct partition scheme (GPT for UEFI, MBR for BIOS).
Rufus freezes or takes too long – This can happen with slow USB drives. Wait at least 10 minutes. If it’s still stuck, cancel and try a different USB drive or port.
Frequently Asked Questions
Do I need to format the USB drive before using Rufus? – No, Rufus will format it automatically. Just make sure there’s no important data on it.
Can I use a USB 2.0 drive? – Yes, it will work, but it will be slower to write and boot. A USB 3.0 drive is recommended for better performance.
Will this USB work on both UEFI and BIOS computers? – Not simultaneously. You need to choose the correct partition scheme for your target computer. If you’re unsure, check the computer’s firmware settings or use the “MBR” option which is more compatible with older systems.
Can I use the same USB drive for other files after burning Windows? – Yes, you can add files to the USB drive after the process, but be careful not to delete any of the Windows installation files.
Is it safe to use Rufus? – Yes, Rufus is a reputable open-source tool. Just download it from the official website to avoid malicious versions.
What if my ISO file is corrupted? – Rufus may fail or produce a non-bootable USB. Re-download the ISO from Microsoft and try again.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- Google Play Protect: How It Secures Your Android
- Fix SFC Scannow Error in Windows: Complete Guide