sodcalculator

10 Tech How-To

How to Calibrate Compass on iPhone & iPad in iOS 10

Guide 10-53259 · Updated · Step by step

If your iPhone or iPad compass is pointing the wrong way or seems sluggish, calibrating it in iOS 10 is quick and fixes most accuracy issues. This guide walks you through the built-in calibration process, which uses the device’s magnetometer and motion sensors to re-establish a correct heading.

What You’ll Need

  • An iPhone or iPad running iOS 10.
  • The Compass app (it cannot be deleted, but if it’s hidden, find it in a folder or use Spotlight search).
  • A clear area away from large metal objects, magnets, or electronic devices that could interfere.
  • Location Services enabled for the Compass app (Settings > Privacy > Location Services > Compass > While Using the App).

Step-by-Step

  1. Open the Compass app. Tap the Compass icon on your Home screen. If you see a message saying “Compass Interference” or a red/blue screen with a message, you need to calibrate.
  2. If prompted, calibrate immediately. When iOS detects magnetic interference, it shows a full-screen message with a white circle and a small dot. Tilt the device and move the dot around the circle in a figure-eight motion until the circle fills completely and the message disappears.
  3. If no prompt appears, force calibration manually. With the Compass app open, tilt the phone so the screen is facing you, then rotate it in a figure-eight pattern: move it up and down, then side to side, then rotate it in a spiral. Do this for 10–15 seconds.
  4. Check the reading. After the motion, the compass should show a steady heading. Point the top of your device north and verify the red needle (or the heading number) matches a known direction (e.g., the sun rises in the east).
  5. If still inaccurate, restart the Compass app. Double-tap the Home button (or swipe up from the bottom on iPhone 7 and later) to open the app switcher, then swipe the Compass app upward to close it. Reopen it and repeat the figure-eight motion.
  6. Check Location Services. Go to Settings > Privacy > Location Services. Ensure Location Services is on and that Compass is set to “While Using the App.” Without this, the compass may not get a true north reference (it can only show magnetic north).
  7. Test in a different location. Move away from desks, speakers, or phone cases with magnets. Then repeat the figure-eight motion.

Common Mistakes

  • Skipping the calibration prompt. Many users dismiss the full-screen calibration message and continue using the app, which leaves the compass uncalibrated.
  • Making too small or too fast motions. The figure-eight needs to be large and slow enough for the sensors to track. Tiny wrist flicks won’t work.
  • Calibrating near metal or magnets. Being near a laptop, car, or magnetic phone mount will cause constant interference, making calibration ineffective.
  • Forgetting to enable Location Services. Without location access, the compass may show magnetic north but fail to correct for declination (the difference between magnetic and true north), causing errors.

Tips

  • Calibrate in an open area, away from buildings and vehicles, for the best results.
  • If you use a magnetic case or a pop socket with a magnet, remove it before calibrating.
  • After calibration, check the heading against a known reference, like a street map or the sun’s position (sun rises in the east, sets in the west).
  • If you need precise navigation, use the compass in conjunction with Maps and make sure your location arrow is accurate.
  • Restart your iPhone or iPad if the compass is still erratic—this resets the sensor drivers.

Troubleshooting

Calibration prompt never appears. Force it by closing the Compass app and reopening it. If it still doesn’t show, go to Settings > Privacy > Location Services and toggle Compass off and on, then reopen the app.

Compass still shows wrong direction after calibration. Check for magnetic interference. Move away from any electronic devices, then recalibrate. If the problem persists, try turning Location Services off and on again, or restart the device.

Compass app shows a red screen with “Interference”. This means strong magnetic fields are present. Move to a different location and try again.

Compass is grayed out or not available. This can happen if Location Services is off. Enable it, then restart the Compass app.

Calibration works but the bearing drifts. This is normal if you’re moving or near metal. Recalibrate when you’re stationary and away from interference.

After iOS 10 update, compass stopped working. Try a forced restart: press and hold the Home and Power buttons (or Volume Up and Power on iPhone 7) until the Apple logo appears, then release.

Frequently Asked Questions

Why does my iPhone compass need calibration? The compass uses a magnetometer that can be affected by magnetic fields from the environment or the device itself. Calibration resets the sensor’s reference point.

How often should I calibrate? There’s no set schedule. Calibrate whenever you notice the compass is inaccurate, or when you see the calibration prompt.

Does calibration drain the battery? No, the process takes only a few seconds and uses minimal power.

Can I calibrate without the Compass app? No, the calibration motion is only triggered within the Compass app. However, some navigation apps may also trigger it.

Does the iPad have a compass? Only iPad models with cellular capability have a built-in compass. Wi-Fi-only iPads do not have the hardware.

Will a case affect the compass? Yes, cases with magnets, such as those with magnetic closures or magnetic mounts, can interfere. Remove the case before calibrating.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →