sodcalculator

10 Tech How-To

Change AirPods Settings on a Mac: Step-by-Step

Guide 10-45560 · Updated · Step by step

This guide shows you how to adjust your AirPods settings directly on a Mac, covering everything from renaming them and changing tap controls to enabling noise cancellation and checking battery life. You’ll need your AirPods paired with your Mac and the Bluetooth turned on.

What You’ll Need

  • A Mac running macOS Monterey or later (the interface may vary slightly on older versions).
  • Your AirPods (any generation) or AirPods Pro/Max.
  • Your AirPods must be connected to the Mac via Bluetooth (they usually auto-connect when you put them in your ears).

Step-by-Step

  1. Open System Settings (or System Preferences). Click the Apple menu in the top-left corner of your screen and select System Settings (on macOS Ventura and later) or System Preferences (on macOS Monterey and earlier).
  2. Go to Bluetooth. In the sidebar (or the main window on older macOS), click Bluetooth.
  3. Find your AirPods. In the list of devices, locate your AirPods. They may appear as “AirPods” or with your custom name (e.g., “John’s AirPods”).
  4. Click the “i” button. Next to your AirPods, click the small “i” (info) icon. This opens the detailed settings panel for your AirPods.
  5. Rename your AirPods. In the Name field, type a new name. This name will appear on all your Apple devices.
  6. Adjust double-tap or press-and-hold controls. Depending on your AirPods model, you’ll see options like Double-Tap on Left and Double-Tap on Right (for AirPods 1st and 2nd gen) or Press and Hold on Left and Press and Hold on Right (for AirPods Pro). Click the dropdown next to each and choose the action you want: Siri, Play/Pause, Next Track, Previous Track, or Off.
  7. Enable or disable noise control. For AirPods Pro and AirPods Max, you’ll see a Noise Control section. Check the boxes for Noise Cancellation, Transparency, and Off to allow cycling through these modes when you press and hold the stem (or the noise control button on AirPods Max).
  8. Turn on automatic ear detection. Make sure the Automatic Ear Detection toggle is on (green). This pauses audio when you remove an AirPod and resumes when you put it back in.
  9. Check battery levels. The same settings panel shows the current battery percentage for each AirPod and the charging case, so you can see when they need charging.
  10. Close the settings. Once you’ve made your changes, just close the System Settings window. Your AirPods will save the new settings automatically.

Common Mistakes

  • Not having the AirPods connected. If your AirPods are not connected (e.g., they’re in the case with the lid closed), they may not appear in the Bluetooth list, or the “i” button might be grayed out. Make sure they are in your ears or the case lid is open.
  • Looking in the wrong place. Some users look for AirPods settings in the Sound or Notifications settings. They are only under Bluetooth in System Settings.
  • Changing the wrong “double-tap” setting. On AirPods 1st and 2nd gen, the double-tap actions are separate for left and right. If you tap the wrong side, you might not get the expected action.
  • Forgetting to update macOS. Older macOS versions may not show all settings (e.g., noise control toggles for AirPods Pro). Update your Mac to the latest version to access all features.
  • Assuming the settings sync instantly. Changes you make on your Mac may take a few seconds to sync to your AirPods. If you test immediately, it might not work yet.

Tips

  • Use Siri for quick changes. Instead of going into settings, you can say “Hey Siri, turn on noise cancellation” or “Hey Siri, change the name of my AirPods” (though renaming via Siri may not work on all versions).
  • Customize the press-and-hold duration. On AirPods Pro, you can adjust how long you need to press and hold to trigger the action. In the same settings panel, look for Press and Hold Duration and choose Short or Long.
  • Reset your AirPods if settings don’t stick. If your changes keep reverting, try resetting your AirPods: put them in the case, close the lid, wait 30 seconds, then open the lid and press and hold the setup button on the back of the case for about 15 seconds until the LED flashes amber, then white. Re-pair them with your Mac.
  • Use the same settings on all devices. Your AirPods settings are stored on the AirPods themselves, so changes you make on your Mac will also apply to your iPhone and iPad.
  • Check for firmware updates. Apple periodically updates AirPods firmware. To check, keep your AirPods connected to your Mac, then go to System Settings > Bluetooth > click the “i” next to your AirPods. If a firmware update is available, it will install automatically when the AirPods are in the case and charging.

Troubleshooting

  • AirPods not showing in Bluetooth list. Make sure Bluetooth is on (toggle in System Settings > Bluetooth). If they still don’t appear, put your AirPods in the case, close the lid, wait 10 seconds, then open the lid and hold the setup button on the back of the case until the LED flashes white. They should appear as “Not Connected” – click “Connect” next to them.
  • “i” button is grayed out. This usually means the AirPods are not connected. Try taking them out of the case and putting them in your ears, or click “Connect” first.
  • Changes don’t take effect. Sometimes the AirPods need to be reconnected. Turn off Bluetooth on your Mac, wait a few seconds, then turn it back on. Alternatively, put the AirPods back in the case, close the lid, and wait a few seconds before using them again.
  • Noise control options are missing. This only happens with AirPods Pro or AirPods Max. If you have AirPods (non-Pro), you won’t see noise control settings. Also, make sure your AirPods firmware is up to date.
  • Automatic ear detection isn’t working. Check that the toggle is on. If it still doesn’t work, try cleaning the sensors (the black mesh on the inside of the AirPods). Also, make sure the AirPods fit snugly in your ears.
  • Battery percentage not showing. The battery percentage only appears when the AirPods are connected. If you see “–”, try reconnecting them.

Frequently Asked Questions

  1. Can I change the name of my AirPods from my Mac? Yes, go to System Settings > Bluetooth, click the “i” next to your AirPods, and edit the Name field.
  2. How do I turn off automatic ear detection? In the same AirPods settings panel, toggle off “Automatic Ear Detection.”
  3. Can I change the double-tap action on AirPods Pro? AirPods Pro don’t have double-tap; they use press-and-hold on the stem. You can customize that in the settings panel.
  4. Why can’t I see noise cancellation options? Noise cancellation is only available on AirPods Pro and AirPods Max. If you have those, make sure they are connected and firmware is updated.
  5. Will my AirPods settings sync to my iPhone? Yes, AirPods settings are stored on the AirPods themselves and sync across all devices signed in with the same Apple ID.
  6. How do I reset my AirPods to factory settings? Put them in the case, close the lid, wait 30 seconds, then open the lid and press and hold the setup button on the back of the case for about 15 seconds until the LED flashes amber, then white. Re-pair them with your devices.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →