sodcalculator

10 Tech How-To

Acer BIOS Password: How to Change It

Guide 10-43333 · Updated · Step by step

This guide walks you through changing the BIOS password on an Acer laptop, covering both setting a new password and removing an existing one. You will need to access the BIOS setup utility and, if a password is already set, know that current password to make any changes.

What You’ll Need

  • Your Acer laptop, plugged into AC power
  • The current BIOS password (if one is already set)
  • A few minutes of uninterrupted time

Step-by-Step

  1. Power off the laptop. Shut down Windows completely. Do not use Restart, as this may skip the BIOS entry prompt.
  2. Turn the laptop on and immediately press the BIOS key. For most Acer laptops, this is the F2 key. Press it repeatedly (about once per second) as soon as the screen lights up, until the BIOS setup screen appears. On some models, Del or F10 may work; the key is usually shown briefly at the bottom of the screen during startup.
  3. Navigate to the Security tab. Once in the BIOS, use the left and right arrow keys to move through the top menu tabs. Look for a tab labeled Security.
  4. Locate the password settings. Within the Security tab, you will see options such as Set Supervisor Password, Set User Password, or Change Supervisor Password. The exact wording varies by BIOS version.
  5. Select the password option and press Enter. Use the up and down arrow keys to highlight the relevant option (usually the Supervisor Password), then press Enter.
  6. Enter the current password (if applicable). If a password is already set, a field will prompt for the Current Password. Type it and press Enter. If no password is set, this field may be skipped or left blank.
  7. Enter the new password. You will be prompted to type the New Password. Choose a strong password and type it carefully, then press Enter. Note that BIOS passwords are case-sensitive.
  8. Confirm the new password. A Confirm New Password field will appear. Type the exact same password again and press Enter.
  9. Save and exit. Press F10 to save changes and exit the BIOS. A confirmation dialog will appear; select Yes or OK and press Enter. The laptop will restart with the new BIOS password active.
  10. To remove the password entirely: Follow steps 1-5. When prompted for the new password, simply leave the field blank and press Enter. Confirm the blank password the same way, then save and exit with F10.

Common Mistakes

  • Pressing the BIOS key too late. Windows may start loading before the key is registered. Shut down completely and try again, pressing the key immediately and repeatedly.
  • Using the wrong key. Not all Acer models use F2. Check the bottom of the screen during boot for the correct key, or consult your laptop’s manual.
  • Mistyping the password. BIOS password fields do not show characters as you type. Double-check each character, especially when confirming.
  • Forgetting the current password. You cannot change or remove a BIOS password without knowing the current one. There is no backdoor or reset button.
  • Entering the password in the wrong case. BIOS passwords are case-sensitive. Ensure Caps Lock is off or on as intended.

Tips

  • Write down your new password and store it in a safe place. Losing a BIOS password can be a significant inconvenience.
  • Use a combination of letters, numbers, and symbols for a stronger password, but avoid characters that are difficult to type on a laptop keyboard.
  • Set a Supervisor Password, not just a User Password. The Supervisor Password controls all BIOS settings, while a User Password only restricts booting.
  • If your laptop is used by others, consider setting both a Supervisor and a User password for layered security.
  • Keep the BIOS updated. Acer occasionally releases BIOS updates that may change the menu layout. Check Acer’s support site for your specific model.

Troubleshooting

  • The BIOS key does not work. If F2 does not open the BIOS, try pressing and holding Fn + F2. On some Acer models, the function keys require the Fn key to be held. Alternatively, try Esc to bring up a boot menu, then select “Enter Setup.”
  • You see a “Password Check” prompt on boot. This is normal after setting a password. Enter the password you just set and press Enter to continue. If it fails, you may have mistyped it during setup.
  • The BIOS screen is different from the steps above. Acer uses several BIOS vendors (Insyde, Phoenix, AMI). The tab names may differ slightly, but the Security section is almost always present. Look for any menu item containing the word “Password.”
  • You forgot the current BIOS password. Unfortunately, there is no software workaround. You will need to contact Acer support or an authorized service center. They may require proof of purchase and can often reset the password by reflashing the BIOS chip.
  • Changes do not take effect after saving. Ensure you press F10 and select Yes to confirm saving. Some BIOS versions require you to select “Save Changes and Exit” from the Exit tab instead.
  • The laptop boots straight to Windows. This usually means the BIOS key press was too late. Disable “Fast Startup” in Windows Power Options, then shut down and try again. Fast Startup skips parts of the boot process that allow BIOS access.

Frequently Asked Questions

Q: What is the default BIOS password for an Acer laptop?
A: Acer laptops generally do not have a default BIOS password. If a password is requested at boot, it was set by a previous user or owner.

Q: Can I reset the BIOS password by removing the CMOS battery?
A: On most modern Acer laptops, removing the CMOS battery will not clear the BIOS password. The password is stored in a separate non-volatile memory chip that retains data even without power.

Q: Will changing the BIOS password affect my Windows login?
A: No. The BIOS password is separate from your Windows account password. It only controls access to the BIOS setup and, optionally, the boot process.

Q: How long should the BIOS password be?
A: Most Acer BIOS versions allow passwords of up to 8 characters. Some newer models may support longer passwords. Keep it under 8 characters to be safe.

Q: Can I use the same password for both Supervisor and User?
A: Yes, you can, but it is not recommended. If they are the same, the distinction between the two levels of access becomes meaningless.

Q: Does a BIOS password protect my data if the laptop is stolen?
A: It adds a layer of difficulty but is not foolproof. The hard drive can still be removed and read on another machine. For full disk encryption, use BitLocker or similar software.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →