sodcalculator

10 Tech How-To

Change Weather App to Celsius on iPhone

Guide 10-47074 · Updated · Step by step

This guide shows you how to switch the built-in Weather app on your iPhone from Fahrenheit to Celsius. The change takes effect immediately and applies to all locations you have saved. You only need your iPhone with iOS 15 or later (the steps are nearly identical on older versions).

What You’ll Need

  • An iPhone with the Weather app installed (it comes preinstalled and cannot be deleted).
  • Your iPhone must be running iOS 15 or newer for the exact menu names below. If you have an older version, the settings are still in the same app but the wording may differ slightly.
  • No internet connection is required—the setting is stored on your device.

Step-by-Step

  1. Open the Settings app on your iPhone. It is the gray gear icon on your home screen.
  2. Scroll down and tap “Weather” in the settings list. It is usually near the bottom, in the third group of options (below “Wallet & Apple Pay” and above “Maps”).
  3. Tap “Temperature Unit”—this is the second option in the Weather settings screen, directly under “Location”.
  4. Select “Celsius” from the two choices: Fahrenheit or Celsius. A checkmark will appear next to it.
  5. Exit Settings by swiping down from the top-left corner or pressing the Home button (on older models).
  6. Open the Weather app to verify the change. The temperature for your current location and all saved cities should now display in degrees Celsius (°C).

If you prefer to change it directly from the Weather app itself, you can do that too:

  1. Open the Weather app.
  2. Tap the list icon (three horizontal lines) in the bottom-right corner.
  3. Tap the circle with “C/F” in the top-right corner of the list screen.
  4. Select “C” and tap “Done” (or just tap outside the popup).

Common Mistakes

  • Changing the wrong setting: Some users go to Settings > General > Language & Region and change the temperature unit there. That setting is for the system-wide region format and may not affect the Weather app. You must use the dedicated Weather settings.
  • Forgetting to exit Settings: The change applies instantly, but if you don’t close Settings and reopen the Weather app, you might think it didn’t work.
  • Using the Weather widget: The widget updates automatically, but it may take a few seconds to refresh. If it still shows Fahrenheit, try removing and re-adding the widget.
  • Assuming it changes the lock screen weather: The lock screen weather complication (if you have one) also follows the same setting, but it may take a minute to update.

Tips

  • If you travel frequently, you can quickly toggle between Celsius and Fahrenheit using the C/F button in the Weather app’s list view—no need to go into Settings every time.
  • The setting applies to all locations you have saved, not just your current one. So if you have a city in the US and one in Europe, both will show Celsius.
  • You can also ask Siri: “Change weather to Celsius” and it will open the correct settings page for you.
  • If you have an Apple Watch, the Weather app on the watch will also switch to Celsius automatically after you change it on the iPhone.

Troubleshooting

If the Weather app still shows Fahrenheit after following the steps:

  1. Force-close the Weather app: Swipe up from the bottom of the screen (or double-click the Home button on older models) to open the app switcher, then swipe the Weather app away. Reopen it.
  2. Restart your iPhone: Hold the side button and either volume button until the power off slider appears, then slide to power off. Wait 30 seconds, then turn it back on.
  3. Check if you have a third-party weather app: If you are looking at a different app (like AccuWeather or Weather Channel), that app has its own settings. This guide only covers Apple’s built-in Weather app.
  4. Update iOS: Go to Settings > General > Software Update. If an update is available, install it. Older iOS versions had a different settings layout, and updating will ensure the menu matches this guide.
  5. Reset all settings (last resort): Go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This will not delete your data, but it will reset all system preferences. You will need to re-enable Wi-Fi, Bluetooth, and other preferences.

Frequently Asked Questions

Why doesn’t my Weather app show Celsius even after I changed it?

Make sure you changed the setting in Settings > Weather > Temperature Unit, not in the Language & Region settings. Also, force-close the Weather app and reopen it. If it still doesn’t work, restart your iPhone.

Will this change the temperature on my Apple Watch?

Yes, the Apple Watch’s Weather app and complications follow the same setting. It may take a minute to sync, but it will update automatically.

Can I have different units for different cities?

No, the temperature unit is global for the Weather app. All locations will use the same unit you choose.

Does the Weather widget update immediately?

It usually updates within a few seconds. If it doesn’t, remove the widget and add it again from the widget gallery.

What if I only see Fahrenheit and no Celsius option?

This is extremely rare. Make sure you are looking at Settings > Weather, not the Weather app itself. If the option is missing entirely, try restarting your iPhone or updating iOS.

Will this affect other apps that show weather?

No, this only affects Apple’s built-in Weather app. Other weather apps have their own settings. However, some apps may use the system region format, so if you want them in Celsius too, you may need to change the region in Settings > General > Language & Region.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →