sodcalculator

10 Tech How-To

How to Check Beats Battery on iPhone

Guide 10-47402 · Updated · Step by step

Checking the battery level of your Beats headphones or earbuds on an iPhone takes only a few seconds once you know where to look. This guide shows you the quickest ways to see the exact percentage for each Beats product, whether you have Powerbeats Pro, Beats Fit Pro, Studio Buds, or an over-ear model like Studio3. No extra app is needed—everything works through the iPhone’s built-in Bluetooth tools.

What You’ll Need

  • An iPhone with iOS 14 or later (older versions work too, but the widgets look different)
  • Your Beats device charged and powered on
  • Bluetooth turned on in the iPhone’s Control Center or Settings
  • The Beats device paired to the iPhone at least once before

Step-by-Step

  1. Turn on your Beats device. For earbuds, open the charging case with the buds inside. For over-ear headphones, power them on with the button on the right ear cup. If the device is already connected, you can skip this step.
  2. Unlock your iPhone and make sure it’s on the Home Screen. The battery check works best when the phone is awake and unlocked.
  3. Open the charging case (for earbuds) or hold the headphones near the iPhone. Within 2–3 seconds, a pop-up animation appears at the top of the screen showing the Beats product and its battery percentage. This is the fastest method for earbuds.
  4. If the pop-up doesn’t appear, use the Batteries widget instead. Swipe right on the Home Screen (or Lock Screen) to open the Today View. Scroll to the bottom, tap Edit, then tap the green + next to Batteries. Tap Done. The widget now shows your Beats battery level alongside your iPhone’s battery.
  5. Check via Control Center. Swipe down from the top-right corner of the screen (on iPhones with Face ID) or swipe up from the bottom (on iPhones with a Home button). Look at the top of the Control Center panel—you’ll see small icons for connected Bluetooth devices, each with its battery percentage next to it.
  6. Use the Settings app for a permanent view. Open Settings → Bluetooth. Find your Beats device under My Devices and tap the i icon next to it. The battery percentage appears at the top of this screen, along with the serial number and firmware version.
  7. Check each earbud individually. For true wireless models like Beats Fit Pro, the pop-up and the Bluetooth settings page show separate percentages for the left bud, right bud, and the case. The case percentage only shows when the case is open.
  8. If you’re listening to audio, check the volume HUD. When you press the volume buttons on the iPhone while Beats are connected, the on-screen volume indicator briefly shows the Beats battery icon with its remaining charge. This works only during active playback.

Common Mistakes

  • Expecting the pop-up every time. The animated pop-up only appears when the Beats device is first detected—when you open the case or power on the headphones. If the device is already connected, you won’t see it again until you disconnect and reconnect.
  • Checking with the case closed. For earbuds, the case battery percentage only displays when the lid is open. With the case closed, you’ll only see the buds’ charge.
  • Looking in the wrong Settings menu. The battery percentage is not in the main Settings screen or in the Beats app (there isn’t one). It’s specifically under Settings → Bluetooth → tap the i.
  • Assuming the widget updates instantly. The Batteries widget refreshes every few minutes. If you just took the Beats out of the case, wait 30–60 seconds for the widget to catch up.

Tips

  • Add the Batteries widget to your Home Screen for a glanceable view without opening any menus. Long-press the Home Screen, tap +, search for Batteries, and choose the small or medium size.
  • Keep the Beats case near the iPhone when checking. The Bluetooth signal is weak inside a closed case, and the phone may show a stale reading.
  • Check before you leave. The pop-up appears when you open the case even if the buds are inside—use that moment to confirm you have enough charge for your commute.
  • Update the firmware. Beats devices occasionally receive firmware updates through the iPhone. Keeping them updated improves battery reporting accuracy. Updates happen automatically when the device is connected and charging.
  • Use Siri for a quick check. Say “Hey Siri, what’s my Beats battery?” and Siri will read the percentage aloud. This works when the Beats are connected.

Troubleshooting

No pop-up appears when opening the case. Make sure Bluetooth is on in Control Center. If it is, toggle Bluetooth off and on again. Then close the case, wait 10 seconds, and reopen it near the phone. If the pop-up still doesn’t show, the Beats may need to be re-paired: go to Settings → Bluetooth, tap the i next to the device, and choose Forget This Device. Then hold the pairing button on the case (or headphones) until the LED blinks and pair again.

The Batteries widget shows no Beats device. The widget only lists devices that are currently connected or were connected recently. Put the Beats on or open the case, wait a minute, and check again. If it still doesn’t appear, restart the iPhone by holding the side button and volume button until the power slider appears, then slide to power off and back on.

The percentage seems stuck or wrong. Close the case and plug it into a charger for a few minutes. The case may be reporting a cached reading. If the issue persists, reset the Beats by holding the system button (on the case or headphone) for 15 seconds until the LED flashes red and white, then pair again.

Battery shows on the phone but not on the Beats themselves. Some models don’t have a battery indicator on the device. The iPhone reading is the only reliable source. If the Beats have an LED, it typically shows green (charged), yellow (medium), or red (low) when you press the power button or open the case.

The device isn’t in the Bluetooth list at all. The Beats are either off, out of range, or the battery is completely drained. Charge the case or headphones for at least 10 minutes, then try again. If they still don’t appear, reset the device as described above.

Frequently Asked Questions

Q: Do I need an app to check my Beats battery?
A: No. All Beats models work with the iPhone’s built-in Bluetooth features. There is no separate Beats app for battery checking.

Q: Why does my Beats battery show differently on the pop-up vs. Settings?
A: The pop-up shows the real-time reading at the moment of connection. The Settings page may show a slightly cached value. Both are accurate within a few percent.

Q: Can I check the battery when the Beats are in the case?
A: Yes, but only if the case lid is open. The case itself also has a battery, and its percentage appears in the same pop-up and in the Bluetooth settings page.

Q: How often should I check the battery?
A: There’s no need to check constantly. The iPhone shows a low-battery notification when your Beats drop below 20%, and again at 10%. Checking once in the morning is usually enough.

Q: Do older Beats models show battery on iPhone?
A: Yes, any Beats product that connects via Bluetooth and supports Apple’s W1 or H1 chip (or newer) shows battery on iPhone. Very old models without those chips may only show a generic Bluetooth battery icon, not a percentage.

Q: Why does my left and right earbud show different percentages?
A: That’s normal. Each bud has its own battery, and they drain at slightly different rates depending on usage, volume, and which one handles the microphone. The case charges them when you put them back, so the difference usually evens out.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →