This guide shows you how to verify whether a USB flash drive contains a bootable operating system or recovery environment, directly from Windows 10. You’ll learn two reliable methods—using Disk Management and using Command Prompt—that reveal the hidden partition structure of a bootable USB. No additional software is required, and the whole check takes less than a minute.
What You’ll Need
- A Windows 10 PC (any edition, Home or Pro).
- The USB drive you want to check. It can be empty, contain files, or already have a bootable image written to it.
- Administrator access to the PC (required for the Command Prompt method).
Step-by-Step
Method 1: Using Disk Management (No Command Line)
- Insert the USB drive into a USB port on your Windows 10 computer.
- Press Windows Key + X and select Disk Management from the menu that appears. Alternatively, right-click the Start button and choose Disk Management.
- In the lower half of the Disk Management window, locate your USB drive. It will be labeled as Removable and typically has a drive letter (e.g., E:, F:). If you’re unsure which one it is, unplug the USB and replug it—the entry that disappears and reappears is your drive.
- Look at the layout of the USB drive. A bootable USB drive usually shows two partitions: a small EFI System Partition (often 100–500 MB, formatted as FAT32) and a larger main partition (often NTFS or FAT32). The EFI partition is the key indicator—it stores boot files.
- If you see an EFI System Partition on the USB, it is bootable (or at least contains a UEFI boot loader). If you only see one large partition with no EFI, the drive may still be bootable in legacy BIOS mode, but it’s less common for modern Windows installation media—continue to Method 2 for a definitive check.
Method 2: Using Command Prompt (Definitive Check)
- Insert the USB drive if you haven’t already.
- Press Windows Key, type cmd, right-click Command Prompt, and select Run as administrator. Click Yes if prompted by User Account Control.
- Type
diskpartand press Enter. This opens the DiskPart utility. - Type
list diskand press Enter. Note the Disk number that matches the size of your USB drive (e.g., Disk 1). Be careful—do not select the wrong disk. - Type
select disk X(replace X with the actual number) and press Enter. You’ll see a confirmation like “Disk 1 is now the selected disk.” - Type
list partitionand press Enter. This shows all partitions on the USB drive. - Look for a partition with Type = System or Type = EFI. If you see one, the drive is bootable. If you see only a single partition with Type = Primary or Logical, the drive may not be bootable, or it might be a legacy boot drive (which is rare for modern Windows 10 media).
- Type
exitand press Enter to close DiskPart, then close Command Prompt.
Common Mistakes
- Selecting the wrong disk in DiskPart—This is the most dangerous mistake. Always verify the disk number against the size shown in
list disk. Choosing the wrong disk and runningcleanordelete partitioncan wipe your internal hard drive. - Confusing a data USB with a bootable one—A USB drive that simply contains an ISO file or a setup.exe is not bootable. It must have a proper boot sector and partition structure.
- Assuming all bootable USBs show an EFI partition—Some older bootable USBs (created for legacy BIOS) may have a single partition with an MBR boot sector. The absence of an EFI partition does not 100% rule out bootability, but for Windows 10 installation media, it’s almost always present.
- Checking while the USB is in use—If a file is open from the USB, Windows may not show all partitions correctly. Close any open files or windows from the USB before checking.
Tips
- Use the Disk Management method first—it’s safer and quicker for most users.
- If you’re creating a bootable USB, use the official Windows Media Creation Tool or a reputable tool like Rufus. These tools format the drive correctly with the needed partitions.
- Check the drive’s capacity—A bootable Windows 10 USB needs at least 8 GB. If your USB is smaller, it likely isn’t bootable.
- Look for the “UEFI” label—In Disk Management, the EFI partition is sometimes labeled as “EFI System Partition” or “System Reserved”.
- Test the USB by booting from it—If you have a spare PC or can restart your current one, the ultimate test is to boot from the USB. You can do this by entering the boot menu (usually F12, F2, or Esc during startup) and selecting the USB drive.
Troubleshooting
What if Disk Management shows only one partition and no EFI?
This could mean the USB is not bootable, or it’s a legacy boot drive. Try Method 2 to see if the partition type is “System” (which indicates MBR boot). If it’s just “Primary”, the drive is likely not bootable. You can also try opening the USB in File Explorer and looking for a folder named efi or boot—if present, it’s probably bootable.
What if DiskPart doesn’t show any partitions on the USB?
This usually means the USB is completely empty or has no file system. A bootable USB always has at least one partition. If you see “No volumes” or “There are no partitions on this disk”, the drive is not bootable.
What if the USB is recognized as a fixed disk rather than removable?
Some USB drives (especially high-capacity ones) are detected as fixed disks. This doesn’t affect bootability, but be extra careful in DiskPart—the disk number might be close to your internal drive. Always double-check the size.
What if I accidentally formatted the USB?
If you’ve formatted it, it’s no longer bootable. You’ll need to recreate the bootable media using the original ISO and a tool like Rufus. This is not recoverable from the USB itself.
Frequently Asked Questions
Can I check if a USB is bootable without using Command Prompt?
Yes, use Disk Management. If you see an EFI System Partition on the USB, it’s bootable. This is the easiest method for most users.
Does a USB with an ISO file copied onto it count as bootable?
No. Simply copying an ISO file to a USB does not make it bootable. The USB must have a boot sector and the correct partition structure, which is created by tools like Rufus or the Windows Media Creation Tool.
Will a bootable USB show up as two drives in File Explorer?
Sometimes. If the USB has an EFI partition, Windows may assign it a drive letter, making it appear as two drives. However, Windows often hides the EFI partition, so you might only see one drive. This is normal.
How can I tell if a USB is bootable for UEFI or legacy BIOS?
If the USB has an EFI System Partition (FAT32), it supports UEFI boot. If it has a single partition with an MBR boot sector, it’s for legacy BIOS. Some USB drives support both, having an EFI partition and a legacy boot sector.
Can I make a non-bootable USB bootable without losing data?
No. Creating a bootable USB requires formatting the drive, which erases all data. Back up any important files before attempting to make it bootable.
Is it safe to delete the EFI partition on a USB to free space?
If you delete the EFI partition, the USB will no longer be bootable. You can delete it if you want to use the USB for regular storage, but you’ll need to format the entire drive to reclaim the space.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps