sodcalculator

10 Tech How-To

How to Check If a Hard Drive Is Failing and Back Up Data

Guide 10-53006 · Updated · Step by step

This guide shows you how to spot the warning signs of a failing hard drive, run built-in diagnostic tools to confirm the problem, and back up your important files before it’s too late. You’ll learn quick checks you can do right now, plus long-term strategies to protect your data. No special equipment is needed—just your computer and a few minutes.

What You’ll Need

  • Your computer (Windows, Mac, or Linux)
  • An external storage device (USB drive, external hard drive, or cloud storage account) with enough free space for your important files
  • A stable internet connection if you plan to use cloud backup

Step-by-Step

  1. Listen for unusual sounds. A failing hard drive often makes clicking, grinding, or whirring noises, especially when reading or writing data. If you hear any of these, treat it as a serious warning and back up immediately.
  2. Watch for performance issues. If your computer takes longer to boot, files open slowly, or programs freeze frequently, the drive may be struggling. Note when these issues started—sudden changes are more concerning than gradual ones.
  3. Check for error messages. Blue screens (Windows), kernel panics (Mac), or messages like “disk not recognized” or “file system corrupted” can indicate drive problems. Also check the system event log for disk-related errors.
  4. Run the built-in diagnostic tool.
    • Windows: Open Command Prompt as administrator and type chkdsk C: /f /r (replace C: with your drive letter). You may need to restart to let it run. This checks for file system errors and bad sectors.
    • Mac: Open Disk Utility (in Applications/Utilities), select your drive, and click “First Aid”. This verifies and repairs the disk.
    • Linux: Use the fsck command on the unmounted partition, e.g., sudo fsck /dev/sda1. For S.M.A.R.T. data, use smartctl if installed.
  5. Check S.M.A.R.T. status. Most drives report Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) data. On Windows, you can see this in the Command Prompt with wmic diskdrive get status (look for “OK”). On Mac, use System Information > SATA/SATA Express and look for “S.M.A.R.T. status: Verified”. If it says “Failing” or “Not Supported”, back up immediately.
  6. Use third-party diagnostic software (optional). Tools like CrystalDiskInfo (Windows) or DriveDx (Mac) provide detailed S.M.A.R.T. analysis, including reallocated sectors and spin-up time. A high count of reallocated sectors (more than a few) is a strong sign of failure.
  7. Back up your data now. If any test shows a problem, or if you have multiple warning signs, back up immediately. Copy your most important files (documents, photos, videos, music, and any work files) to an external drive or cloud service. Use a file-by-file copy rather than a disk image if the drive is failing—it’s more likely to succeed.
  8. Choose a backup method.
    • Manual copy: Drag and drop files to an external drive. Simple, but you must remember to do it regularly.
    • Cloud backup: Services like Google Drive, Dropbox, or iCloud automatically sync files. Good for ongoing protection, but may be slow for large amounts of data.
    • Full system image: Tools like Windows Backup or Time Machine (Mac) create a complete snapshot of your drive. Best for disaster recovery, but requires a drive as large as your current one.
  9. Replace the drive if it’s failing. Once your data is backed up, replace the failing drive with a new one. You can then restore your data from the backup.

Common Mistakes

  • Ignoring early warnings. Many people wait until the drive completely fails before acting. If you see any signs, back up immediately.
  • Only backing up some files. Be thorough—include hidden folders, browser bookmarks, email archives, and anything else you can’t afford to lose.
  • Using the same drive for backup. A second physical drive is essential. If you back up to a partition on the same failing drive, you’ll lose everything when it dies.
  • Not testing the backup. After backing up, verify that you can open a few files from the backup. A backup that can’t be restored is useless.

Tips

  • Use the 3-2-1 rule. Keep at least three copies of your data, on two different types of media, with one copy offsite (e.g., cloud).
  • Set up automatic backups. Schedule regular backups so you don’t have to remember.
  • Monitor drive health periodically. Run S.M.A.R.T. checks every few months, even if everything seems fine.
  • Keep your drive cool. Overheating can accelerate failure. Ensure good airflow around your computer.
  • If you must use a failing drive, minimize writes. Avoid moving or deleting files on it until you’ve backed up.

Troubleshooting

  • What if chkdsk or First Aid fails? If the tool reports errors it can’t fix, the drive is likely beyond repair. Focus on recovering data using data recovery software (like Recuva or Disk Drill) before the drive dies completely.
  • What if the drive is not recognized? Try connecting it to a different USB port or using a different cable. If it still isn’t recognized, it may be a connection issue or the drive may be completely dead. Seek professional data recovery services if the data is critical.
  • What if the backup is too slow? If copying files takes ages, prioritize the most important files first. Use a USB 3.0 port and a fast external drive if possible. You can also compress large folders into a single archive to speed up copying.
  • What if I don’t have an external drive? Use cloud storage as a temporary solution. Upload critical files to a service like Google Drive or iCloud. For very large amounts of data, consider borrowing an external drive or buying one—it’s worth the cost compared to losing everything.

Frequently Asked Questions

How long does a hard drive last?

Most hard drives last 3-5 years, but some fail earlier and others last longer. Regular S.M.A.R.T. checks and listening for unusual sounds help you catch problems early.

Can I recover data from a dead hard drive?

Sometimes, yes. If the drive is physically damaged, professional data recovery services may be able to extract data, but it can be expensive. If the drive is only logically corrupted, software tools can often recover files.

Is it safe to use a failing hard drive?

It’s risky. A failing drive can fail completely at any moment, causing data loss. Use it only to back up your data, then replace it as soon as possible.

What does a clicking sound mean?

A clicking sound often indicates the drive’s read/write head is failing or the platter is damaged. This is a serious sign—back up immediately and stop using the drive if possible.

How often should I back up my data?

It depends on how much data you can afford to lose. For most people, a daily automatic backup is a good balance. If you work with critical files, consider real-time backup solutions.

Can I use a USB flash drive for backup?

Yes, but flash drives are less reliable than external hard drives for long-term storage. They’re fine for small amounts of data, but for large backups, use a proper external drive.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →