sodcalculator

10 Tech How-To

How to Check if Your Mac is 32 or 64 Bit

Guide 10-45923 · Updated · Step by step

This guide shows you how to determine whether your Mac’s processor and operating system are 32-bit or 64-bit. Knowing this helps you understand which software versions you can run, especially older apps that may only support 32-bit or 64-bit architectures. You’ll need access to your Mac’s System Information or Terminal—no additional tools required.

What You’ll Need

  • Your Mac, powered on and logged in
  • Administrator access (for some Terminal commands, though most checks work without it)

Step-by-Step

  1. Check the processor architecture (easiest method): Click the Apple menu (top-left corner) and select About This Mac. Look at the line labeled Processor or Chip. If it says Intel Core (e.g., Core i5, Core i7) or Apple M1/M2/M3, your hardware is 64-bit capable. All Macs sold since 2007 have 64-bit processors; if you see PowerPC or Intel Core Solo/Core Duo, it’s 32-bit only.
  2. Check the operating system type (for Intel Macs): In the same About This Mac window, click System Report (or More Info on older macOS versions). In the left sidebar, select Software. Look for the 64-bit Kernel and Extensions entry: Yes means the kernel is running in 64-bit mode; No means 32-bit. On Apple Silicon Macs (M1/M2/M3), the kernel is always 64-bit, so this entry may not appear.
  3. Check if an app is 32-bit or 64-bit (macOS Catalina and earlier): Open System Information (as in step 2). Under Software, select Applications. Scroll through the list and look at the 64-Bit (Intel) column. A Yes means the app is 64-bit; No means it’s 32-bit. If you don’t see this column, your macOS version is too new (see step 4).
  4. Check on macOS Catalina (10.15) and later: These versions of macOS can only run 64-bit apps. If you have an app that is 32-bit, it simply won’t open—you’ll get a warning like “You can’t open this application because it is not supported on this version of macOS.” To check a specific app, right-click (or Control-click) the app in Finder, select Get Info, and look for any compatibility notes. For a system-wide check, open System Information (About This Mac > System Report) and under Software, look for Legacy Software—this lists any 32-bit apps installed.
  5. Use Terminal for a quick check: Open Terminal (found in Applications > Utilities). Type uname -m and press Enter. If it returns x86_64, your kernel is 64-bit; if it returns i386, it’s 32-bit. On Apple Silicon, it will return arm64, which is 64-bit. For a more detailed look, run sysctl -n hw.cpu64bit_capable—a result of 1 means your CPU supports 64-bit.
  6. Check your macOS version (for context): Go back to About This Mac and note the version number (e.g., macOS 11 Big Sur). If you’re running macOS 10.15 or later, you already know the OS is 64-bit only. If you’re on an older version like 10.14 Mojave, you can still run 32-bit apps, but the OS itself is 64-bit capable.

Common Mistakes

  • Confusing app architecture with OS architecture: A 64-bit Mac can run 32-bit apps (on older macOS), but a 32-bit Mac cannot run 64-bit apps. Always check both separately.
  • Assuming all Intel Macs are 64-bit: The first Intel Macs (2006) used Core Solo or Core Duo processors, which are 32-bit only. If you have one of these, you cannot upgrade to a 64-bit OS.
  • Looking for the “64-bit” column on Catalina or later: That column is gone because all apps must be 64-bit—there’s nothing to check.
  • Misreading Terminal output: uname -m shows the kernel architecture, not necessarily the CPU’s full capability. For example, a 64-bit CPU can run a 32-bit kernel, but that’s rare on Macs.

Tips

  • If you’re planning to upgrade to macOS Catalina or later, check all your important apps for 64-bit support first. Use the System Information > Applications list to see which ones are 32-bit.
  • For older Macs that can’t run Catalina, you can still use 32-bit apps, but consider replacing them with 64-bit versions for better performance and security.
  • Apple Silicon Macs (M1/M2/M3) can run 64-bit Intel apps via Rosetta 2, but not 32-bit Intel apps at all.
  • If you need to know whether a specific downloaded app is 32-bit, right-click it in Finder, select Get Info, and look for “64-Bit” in the General section (on macOS 10.14 and earlier).

Troubleshooting

  • “System Report” doesn’t show the 64-bit Kernel entry: This is normal on Apple Silicon and on macOS 10.15 or later, where the kernel is always 64-bit. Use uname -m in Terminal instead.
  • The Applications list in System Information is empty or missing the 64-bit column: Make sure you’re looking under Software, not Hardware. If the column is missing, your macOS version doesn’t support 32-bit apps at all, so all apps are 64-bit.
  • Terminal says “command not found” for sysctl: This is unlikely on macOS, but if it happens, try sysctl hw.cpu64bit_capable without the -n flag—you’ll see the value in the output.
  • You have an Intel Core Duo Mac and want to upgrade: Unfortunately, these models are stuck on 32-bit and cannot run macOS versions beyond 10.6 Snow Leopard. You cannot make them 64-bit.
  • An app won’t open on Catalina or later: It’s almost certainly 32-bit. Check the app developer’s website for a 64-bit update, or find an alternative.

Frequently Asked Questions

How do I know if my Mac is 64-bit without using Terminal?

Go to About This Mac > System Report > Software. If you see “64-bit Kernel and Extensions: Yes” (or you have an Apple Silicon chip), your Mac is 64-bit. If you’re on Catalina or later, it’s automatically 64-bit.

Can I run 32-bit apps on macOS Big Sur or Monterey?

No. macOS Catalina (10.15) and later versions do not support 32-bit apps at all. You’ll need to find 64-bit versions or alternatives.

What does “arm64” mean in Terminal?

It means your Mac has an Apple Silicon processor (M1, M2, M3, etc.), which is 64-bit. This is the architecture used by all modern Macs since late 2020.

Is there a way to make a 32-bit Mac run 64-bit software?

No. If your Mac has a 32-bit processor (like the original Intel Core Duo), it physically cannot run 64-bit software. Hardware limitations cannot be overcome with software.

How can I tell if a specific app is 32-bit on macOS Mojave (10.14)?

Open System Information > Software > Applications. Look for the “64-Bit (Intel)” column—if it says “No,” the app is 32-bit. You can also right-click the app in Finder and select Get Info; look for “64-Bit” in the General section.

Does 64-bit mean faster performance?

Not necessarily. 64-bit allows the CPU to handle larger amounts of memory and data more efficiently, but speed depends on many factors. Some 64-bit apps may be faster, but it’s not a guarantee.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →