sodcalculator

10 Tech How-To

Clone HDD to HDD: Full Step-by-Step Guide

Guide 10-51251 · Updated · Step by step

Cloning a hard drive creates an exact, bootable copy of everything on your source drive—operating system, applications, settings, and files—onto a destination drive. This guide walks you through the process using free software, covering preparation, the cloning steps, and what to do if something goes wrong. You’ll need a destination drive with at least as much capacity as the used space on your source drive.

What You’ll Need

  • Source HDD: the drive you want to clone.
  • Destination HDD: the drive you’re copying to. It must be at least as large as the used space on the source, ideally larger.
  • Connection method: both drives must be connected to your computer. If your PC only has one internal bay, use a USB-to-SATA adapter or an external enclosure for the destination drive.
  • Free cloning software: options include Clonezilla (bootable USB), Macrium Reflect Free, or EaseUS Todo Backup Free. This guide uses Clonezilla as the primary method because it’s reliable and works on any Windows or Linux PC.
  • A USB flash drive (8GB or larger) to create a bootable Clonezilla drive, if using that method.
  • Power supply: if using an external drive, ensure it has its own power adapter—don’t rely on USB power for a 3.5″ HDD.
  • Backup of critical data: cloning is generally safe, but a separate backup of your most important files is always prudent.

Step-by-Step

  1. Prepare the destination drive. If the destination drive has any data you want to keep, back it up. Cloning will overwrite everything on it. You don’t need to format it beforehand—the cloning software will handle that.
  2. Connect both drives. Shut down your computer, connect the destination drive (internal SATA or external USB), and boot up. Verify both drives are detected in your BIOS/UEFI or in Disk Management (Windows) / GParted (Linux).
  3. Create a bootable Clonezilla USB. Download the Clonezilla ISO from the official site. Use a tool like Rufus (Windows) or the dd command (Linux) to write the ISO to your USB drive. This will erase the USB.
  4. Boot from the USB. Restart your computer, enter the boot menu (usually F12, F10, or Esc during startup), and select the USB drive. If you’re not sure, check your motherboard manual.
  5. Choose Clonezilla mode. Select “Clonezilla live” and then “Default settings” (or “VGA” if you have display issues). Choose your language and keyboard layout.
  6. Select “Device-device” cloning. When asked “Start Clonezilla,” choose “device-device” to clone directly from one disk to another. This is faster than using an image file.
  7. Choose “Disk to local disk.” Select “Beginner” mode for a simple clone, then “disk_to_local_disk.”
  8. Select the source drive. Clonezilla will list all detected drives with their sizes and models. Choose the source HDD (the one you’re cloning from). Be absolutely certain—selecting the wrong drive will overwrite it.
  9. Select the destination drive. Choose the destination HDD. Double-check the size and model. Clonezilla will warn you that the destination will be overwritten. Confirm.
  10. Confirm the clone. Review the summary and type “y” to proceed. The clone will start. Depending on drive size and speed, this can take several hours. Do not interrupt it.
  11. Wait for completion. When Clonezilla finishes, it will ask if you want to continue. Choose “Poweroff” to shut down safely.
  12. Swap the drives (optional). If you’re replacing your old drive, remove the source and install the destination in its place. Boot up to verify everything works.

Common Mistakes

  • Choosing the wrong source/destination: This is the most catastrophic error. Always verify drive sizes and models twice before confirming.
  • Cloning to a smaller drive: If the destination is smaller than the used space on the source, the clone will fail or be corrupted. Check the used space in your OS before starting.
  • Interrupting the process: Unplugging a drive or losing power during cloning can leave both drives unusable. Use a UPS if possible, and don’t touch anything until it’s done.
  • Not backing up first: While rare, cloning software can fail and damage the source drive. Always have a backup of critical files.
  • Using a USB hub for the destination: External drives should be connected directly to a USB port on the motherboard, not through a hub, to avoid power/connection issues.

Tips

  • Use a wired connection for external drives: If using a USB-to-SATA adapter, make sure it’s a quality one. A flaky connection can cause errors.
  • Defragment the source drive first (Windows): A defragmented source drive will clone faster and with fewer read errors. Run “Optimize Drives” in Windows before starting.
  • Check the destination drive’s health: Run a SMART test or a surface scan on the destination before cloning. Cloning onto a failing drive is a waste of time.
  • Clone to an SSD for speed: If you’re upgrading, cloning HDD to SSD is a great way to speed up your system. The process is identical, but ensure the SSD is at least as large as the used space.
  • Keep the source drive after cloning: Don’t wipe it until you’ve booted from the clone for a few days and confirmed everything works.

Troubleshooting

  • Clone fails with “Read error” or “Bad sector”: Run a disk check on the source drive first (chkdsk /f in Windows, fsck in Linux). If there are bad sectors, you may need to use a tool like ddrescue to clone despite them.
  • Destination not detected: Check the SATA cable and power connection. In BIOS, ensure the SATA port is enabled. For external drives, try a different USB port or cable.
  • Clone completes but system won’t boot: This often happens if the destination drive is not set as the first boot device. Enter BIOS and change the boot order. If that doesn’t work, you may need to repair the bootloader (Windows: startup repair; Linux: reinstall GRUB).
  • Clone is extremely slow: Make sure the destination is connected via USB 3.0 or SATA III. Also, check if the source drive is failing—a dying drive will be slow.
  • Clonezilla shows “No disk found”: Ensure both drives are properly connected and powered. For external drives, some enclosures need to be powered on before the computer boots.

Frequently Asked Questions

Can I clone to a smaller HDD?

Only if the used space on the source is less than the total capacity of the destination. The clone will create a partition that fits, but you’ll need to shrink the source partition first (using Disk Management or GParted) to avoid issues.

Do I need to format the destination drive first?

No. Cloning software will overwrite the entire destination drive, including any existing partitions and formatting. It will create the same partition structure as the source.

Will the clone be bootable?

Yes, if you clone the entire disk (including the boot sector and system partitions). That’s why “disk to disk” cloning is recommended over copying files manually.

How long does it take to clone a 1TB HDD?

Typically 2-4 hours, depending on the speed of both drives and the connection type (USB 3.0 is faster than USB 2.0). A SATA-to-SATA clone is fastest.

Can I use the source drive after cloning?

Yes, but it’s safer to disconnect it while testing the clone to avoid booting from the wrong drive. Once you’re sure the clone works, you can repurpose or wipe the source.

What’s the difference between cloning and imaging?

Cloning copies directly from one disk to another, creating a bootable copy. Imaging creates a single compressed file of the entire drive, which you can later restore to any drive. Imaging is better for backups; cloning is better for immediate replacement.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →