sodcalculator

10 Tech How-To

Compare Handheld Gaming PCs: CPU, GPU & Power

Guide 10-46228 · Updated · Step by step

Comparing handheld gaming PCs by CPU, GPU, and power limits lets you see which device will actually run your games smoothly on the go. You’ll learn to read spec sheets, understand TDP (thermal design power) and APU configurations, and match hardware to your gaming habits. No special tools are needed—just the spec lists from the manufacturers and a bit of patience.

What You’ll Need

  • Spec sheets or product pages for the handhelds you’re considering (CPU, GPU, RAM, storage, battery capacity).
  • A list of games you play or want to play (to compare against performance expectations).
  • Optional: a spreadsheet or notepad to organize the numbers.

Step-by-Step

  1. List the CPUs. Write down the exact CPU model for each device (e.g., AMD Ryzen Z1 Extreme, Intel Core Ultra 7 155H). Note the number of cores and threads, base and boost clock speeds, and the integrated graphics (iGPU) generation—like RDNA 3 or Intel Arc.
  2. Identify the GPU. Most handhelds use an integrated GPU (iGPU) that shares memory with the CPU. If a device has a discrete GPU (rare in this class), note its model and VRAM. For iGPUs, the key specs are the number of compute units (CUs) or execution units (EUs) and the clock speed.
  3. Check the power limit (TDP). Look for the configurable TDP range, often stated as something like “15W-30W” or “9W-30W.” This is the amount of power the APU (CPU+GPU) can draw. Higher TDP means better performance but more heat and less battery life.
  4. Understand the performance vs. efficiency trade-off. A chip with a high TDP (e.g., 30W) will outperform the same chip at 15W, but the battery will drain faster. Compare the default TDP and whether the device lets you adjust it in software.
  5. Compare memory and storage. Faster RAM (LPDDR5X at 7500 MT/s vs. LPDDR5 at 6400 MT/s) benefits the iGPU because it uses system memory. Also note storage type (NVMe SSD vs. eMMC) and capacity—bigger and faster is better for load times and game installs.
  6. Look at real-world performance benchmarks. Specs alone don’t tell the full story. Search for benchmarks of the specific CPU/GPU combo at various TDPs. Sites like NotebookCheck and YouTube channels often test handhelds at 15W, 20W, and 28W to show scaling.
  7. Factor in the display and controls. A 1080p screen needs more GPU power than a 720p screen. Consider refresh rate (60Hz vs. 120Hz) and whether the device has VRR (variable refresh rate) to reduce stutter. Also check if the controls feel comfortable—but that’s not a spec you can compare on paper.
  8. Calculate the battery impact. Battery capacity (Wh) divided by the average power draw gives a rough runtime estimate. For example, a 40Wh battery at 20W average draw gives about 2 hours. But note that gaming at 30W will cut that significantly.
  9. Compare cooling and noise. A well-cooled device can sustain higher TDP without throttling. Look for reviews that mention fan noise and surface temperatures. A device that runs at 25W but throttles after 10 minutes is worse than one that sustains 20W.
  10. Weigh the total package. Consider weight, ergonomics, software (e.g., SteamOS vs. Windows), and price. A powerful chip in a heavy, uncomfortable device might not be worth it.

Common Mistakes

  • Comparing only the CPU model name. The same CPU can perform differently depending on the TDP and cooling. A Z1 Extreme in one device might be limited to 15W while another runs it at 30W.
  • Ignoring the iGPU. In handhelds, the iGPU is often the bottleneck for gaming. A CPU with more cores but a weaker iGPU will lose to a CPU with fewer cores but a stronger iGPU in games.
  • Assuming higher TDP is always better. Higher TDP means more heat and fan noise, and it can lead to thermal throttling if the cooling isn’t up to par. Also, the performance gains from 25W to 30W are often small (5-10%) compared to the battery drain.
  • Forgetting about RAM speed. The iGPU uses system RAM as VRAM. Slow RAM will bottleneck the GPU performance, especially at higher resolutions.
  • Not checking the actual TDP range. Some devices list a “boost” TDP that only lasts a few seconds. Look for the sustained TDP, which is what you’ll get during long gaming sessions.

Tips

  • Use a consistent power limit for comparisons. If you’re comparing two devices, set both to 15W (or 20W) in their software and then run the same game benchmark.
  • Look for reviews that test with the same games and settings. Frame rate at 720p low vs. 1080p medium are very different workloads.
  • Check if the device supports FSR (FidelityFX Super Resolution) or similar upscaling. This can boost frame rates significantly on weaker GPUs.
  • Consider the eGPU support if you want to dock the device to a TV later. Some handhelds support Thunderbolt or OCuLink for external GPUs, which can extend the device’s life.
  • Don’t forget the software. SteamOS is lighter than Windows and can give slightly better performance in some games, but Windows has broader compatibility with launchers like Game Pass.

Troubleshooting

  • If you can’t find a spec (like TDP range): Check the manufacturer’s official product page or the press release. If it’s not listed, look at reviews that measure power draw with a watt-meter.
  • If benchmarks conflict: Different reviewers use different test scenes and settings. Look for a benchmark that matches your typical use case (e.g., a specific game you play).
  • If two devices have the same CPU but different performance: The difference is likely due to TDP, cooling, or RAM. Compare the sustained TDP and read thermal reviews.
  • If you’re torn between two similar devices: Make a list of your top 5 games and see which device runs them at your desired frame rate (e.g., 45fps or 60fps) based on available benchmarks. If both do, choose based on ergonomics, battery, or price.
  • If the device you want has a low TDP limit: You can often increase it in the BIOS or software, but this may void the warranty and increase heat. Only do this if you understand the risks and have good cooling (e.g., a fan stand).

Frequently Asked Questions

What is TDP and why does it matter?

TDP (Thermal Design Power) is the maximum heat the cooling system must dissipate, and it roughly equals the power the CPU/GPU can draw. Higher TDP allows higher clock speeds, so performance increases, but so does heat and battery drain.

Is a dedicated GPU better than an integrated one in a handheld?

Yes, a dedicated GPU would be faster, but it would add significant weight, cost, and power draw, making it impractical for a portable handheld. Integrated GPUs like RDNA 3 are designed to be efficient at low power.

How much RAM do I need?

16GB is the sweet spot for gaming on Windows handhelds. 8GB is too little for modern games, and 32GB is overkill for most, though it helps if you use the device for productivity or emulation.

Can I upgrade the CPU or GPU in a handheld?

No, the CPU and GPU are soldered onto the motherboard. You cannot upgrade them. The only upgrades are typically storage (SSD) and sometimes RAM (if it’s not soldered, which is rare).

What’s the ideal TDP for a handheld?

There’s no single answer. For battery life, 15W is a good balance. For maximum performance on a plugged-in device, 25-30W is common. Check reviews to see how your favorite games run at different TDPs.

Does the screen resolution affect CPU/GPU choice?

Yes, higher resolution (e.g., 1080p vs. 720p) puts more load on the GPU. If you plan to play at 1080p, you’ll need a more powerful GPU or be willing to use upscaling. If you’re fine with 720p, a lower-end chip might suffice.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →