sodcalculator

10 Tech How-To

Connect Apple Keyboard to iPad: Bluetooth & Smart Connector

Guide 10-52912 · Updated · Step by step

This guide walks you through connecting an Apple keyboard to your iPad using either Bluetooth or the Smart Connector. You’ll learn the exact steps for each method, what to do if the keyboard isn’t recognized, and how to avoid common setup mistakes.

What You’ll Need

  • An iPad with iPadOS 13.4 or later (for full keyboard support).
  • An Apple keyboard: Magic Keyboard, Magic Keyboard Folio, Smart Keyboard, or Smart Keyboard Folio.
  • For Bluetooth: the keyboard must be charged (Lightning or USB-C cable).
  • For Smart Connector: an iPad model with the Smart Connector (iPad Pro 11-inch/12.9-inch, iPad Air 4th gen or later, iPad 8th gen or later).

Step-by-Step

Bluetooth Connection

  1. Turn on the keyboard. On Magic Keyboard, flip the power switch to the “on” position (green visible). On Smart Keyboard, there’s no power switch—it’s always on.
  2. Put the keyboard in pairing mode. For Magic Keyboard, press and hold the Bluetooth button (on the back, near the charging port) until the status light blinks. For Smart Keyboard, skip this step—it pairs automatically via Smart Connector.
  3. On your iPad, open Settings > Bluetooth.
  4. Make sure Bluetooth is toggled on.
  5. Under “My Devices” or “Other Devices,” tap the name of your keyboard when it appears (e.g., “Magic Keyboard”).
  6. If asked, enter the PIN shown on the iPad screen using the keyboard, then press Enter. Usually it’s 0000 or 1234.
  7. Wait for “Connected” to appear. The keyboard is ready to use.

Smart Connector Connection

  1. Ensure your iPad is unlocked and on the home screen.
  2. Align the keyboard’s Smart Connector pins (the three small magnetic dots) with the Smart Connector on the back or bottom edge of the iPad.
  3. Gently snap the keyboard into place. The magnets will hold it securely.
  4. The iPad will automatically detect the keyboard and show a brief “Connected” notification. No pairing is needed.
  5. If the keyboard doesn’t respond, detach it, wait a few seconds, and reattach it firmly.

Common Mistakes

  • Forgetting to charge the keyboard: A dead battery won’t pair. Charge with the included cable for at least 15 minutes.
  • Using the wrong port: The Smart Connector only works with compatible iPad models. Check Apple’s spec page for your model.
  • Not toggling Bluetooth on: Even with Smart Connector, Bluetooth must be enabled for some keyboards to work fully.
  • Ignoring iPadOS updates: Older iPadOS versions may have bugs with keyboard pairing. Update to the latest iPadOS.
  • Pairing the wrong device: If you have multiple keyboards, ensure you tap the correct name in the Bluetooth list.

Tips

  • For Bluetooth keyboards, keep the keyboard within 30 feet of the iPad for a stable connection.
  • Use the keyboard’s function keys (like brightness or volume) right away to confirm it’s connected.
  • If you use both Smart Connector and Bluetooth, the Smart Connector takes priority. Disconnect the Smart Connector to use Bluetooth.
  • To forget a Bluetooth keyboard, go to Settings > Bluetooth, tap the “i” next to the device, and choose “Forget This Device.”
  • For Smart Keyboard Folio, the keyboard works in two positions: typing and viewing. Make sure the flap is folded correctly.

Troubleshooting

Keyboard not showing up in Bluetooth list

  • Check that the keyboard is in pairing mode (light blinking). If not, turn it off and on again, then try pairing.
  • Move closer to the iPad and remove any metal objects between them.
  • Restart the iPad (hold power + volume up, slide to power off).

Keyboard connects but doesn’t type

  • Make sure the keyboard is selected as the input device. Try pressing the Caps Lock key to see if the light toggles.
  • Check if the iPad’s on-screen keyboard is still showing. If so, tap the keyboard icon in the bottom right to dismiss it.
  • Try disconnecting and reconnecting the keyboard.

Smart Connector not working

  • Clean the Smart Connector pins on both the keyboard and iPad with a soft, dry cloth. Dust can block the connection.
  • Remove any case that might interfere with the magnetic connection.
  • Force restart the iPad: press and release Volume Up, then Volume Down, then hold the Power button until the Apple logo appears.

Keyboard works but some keys don’t

  • Check that the keyboard’s language layout matches your iPad’s (Settings > General > Keyboard > Hardware Keyboard).
  • Reset the keyboard dictionary: Settings > General > Transfer or Reset iPad > Reset > Reset Keyboard Dictionary.

Frequently Asked Questions

Can I use an Apple keyboard with a non-Apple iPad?

No, Apple keyboards are designed to work only with iPads and iPhones (via Bluetooth). They won’t pair with Android tablets or other devices.

Do I need to charge the Smart Keyboard?

No, the Smart Keyboard and Smart Keyboard Folio draw power directly from the iPad via the Smart Connector. There’s no internal battery.

Can I connect two keyboards at once?

iPadOS supports one keyboard at a time. You can pair multiple keyboards, but only one is active.

How do I know if my keyboard is charging?

For Magic Keyboard, the status light shows green when charging. For Smart Keyboard, there’s no charging indicator because it doesn’t have a battery.

Why does my keyboard keep disconnecting?

This is often due to low battery, interference, or a temporary iPadOS glitch. Check battery level, move closer, and restart the iPad.

Can I use the keyboard with my iPhone?

Yes, any Apple Bluetooth keyboard can connect to an iPhone using the same Bluetooth pairing steps. The Smart Connector versions won’t physically attach to an iPhone.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →