This guide walks you through connecting an original PlayStation (PS1) to a modern HDMI-only TV, covering both basic and higher-quality methods. You’ll learn what cables or adapters you need, how to set them up step by step, and how to troubleshoot common issues like a black screen or no audio.
What You’ll Need
- Original PlayStation console (any model: SCPH-1000 through SCPH-9000 series)
- AV cable that came with the console (composite cable with yellow, red, white RCA connectors) – or a better option like S-Video or SCART cable if your console supports it
- An HDMI adapter or converter: either a RCA to HDMI converter (for composite or S-Video) or a RetroTINK / OSSC (for SCART or component, if you want the best quality)
- HDMI cable
- Power cable for the PlayStation
- Optional: a memory card (not required for connection, but needed for saving games)
- Optional: a small screwdriver if you need to change the PlayStation’s region switch (not usually needed for video)
Step-by-Step
- Turn off both the PlayStation and the TV. This prevents any electrical surges and makes cable handling safer.
- Connect the AV cable to the PlayStation. Plug the multi-out connector (the round plug) into the back of the console. It only fits one way – align the notches and push firmly.
- Connect the other end of the AV cable to the converter or directly to the TV.
- If your TV still has composite inputs (yellow, red, white), you can plug the cable directly into the TV’s AV input. But most modern TVs lack these, so you’ll likely need a converter.
- If using an RCA-to-HDMI converter: plug the yellow (video) and red/white (audio) connectors into the converter’s input jacks, matching colors.
- If using a SCART cable and a RetroTINK or OSSC: connect the SCART end to the console (or via a SCART-to-component adapter) and then connect the device to the TV via HDMI.
- Connect the converter to the TV with an HDMI cable. Insert one end into the converter’s HDMI output, and the other into any HDMI port on your TV.
- Power the converter (if it requires it). Many RCA-to-HDMI converters have a USB power cable – plug it into a USB port on your TV or a wall adapter. Without power, the converter won’t work.
- Plug in the PlayStation’s power cable and turn it on. Press the power button on the console. The LED should light up.
- Turn on the TV and select the correct HDMI input. Use your TV remote to switch to the HDMI input where the converter is connected. You should see the PlayStation’s boot screen (the “Sony Computer Entertainment” logo) or a game if a disc is inserted.
- Adjust the TV’s aspect ratio and picture settings. The PlayStation outputs a 4:3 image, so set your TV’s aspect ratio to “4:3” or “Normal” to avoid stretching. You may also want to enable “Game Mode” to reduce input lag.
Common Mistakes
- Plugging the AV cable into the wrong port. The multi-out connector on the PlayStation is not the same as the one on the PS2 – make sure it’s fully seated and not forced.
- Using a converter that doesn’t support the PlayStation’s signal. Some cheap RCA-to-HDMI converters only handle 60Hz NTSC or 50Hz PAL, but not both. Check your console’s region and converter specs.
- Forgetting to power the converter. Many converters have a USB power cable that must be plugged in; otherwise, you’ll get no signal.
- Not switching the TV to the correct input. Double-check that you’re on the right HDMI port.
- Expecting HD quality. The original PlayStation outputs 240p (or 480i for some games), so even with a good converter, the image will be low-resolution. Don’t mistake upscaling for true HD.
Tips
- For the best quality, use a RetroTINK-5X or OSSC. These devices use line-doubling and deinterlacing to produce a much sharper image than a cheap RCA-to-HDMI converter. They accept SCART or component video from the PlayStation (if you have the right cables).
- Use S-Video if possible. The PlayStation supports S-Video, which is sharper than composite. You’ll need an S-Video cable and a converter that accepts S-Video (or a RetroTINK).
- If you have a PS1 with the original AV cable, you can buy a “PS1 to HDMI” adapter that plugs directly into the console’s multi-out. These are simple and often cheaper than a separate converter, but quality varies.
- Set your TV to “4:3” aspect ratio to avoid stretching the image.
- Turn on “Game Mode” to reduce input lag – important for fast-paced games.
- If you’re playing PAL games on an NTSC TV (or vice versa), you may need a converter that supports both standards. Otherwise, the image may roll or be in black and white.
Troubleshooting
- No picture at all:
- Check that the converter is powered (LED on).
- Verify the HDMI cable is firmly connected to both the converter and TV.
- Make sure the TV is on the correct HDMI input.
- Try a different HDMI port on the TV.
- If using a converter, try plugging the yellow composite cable directly into the TV (if it has composite) to see if the console works at all.
- Picture is black and white:
- This usually means a region mismatch (PAL vs NTSC). Your converter or TV may not support the console’s video standard. Look for a converter that explicitly supports both PAL and NTSC.
- Also check that all cables are fully inserted.
- No sound:
- Ensure the red and white audio cables are plugged into the converter’s audio inputs (matching colors).
- If using a SCART cable, make sure it carries audio (most do).
- Check the TV’s volume and that it’s not muted.
- Picture is blurry or has ghosting:
- This is normal with composite cables. Upgrade to S-Video or SCART for a cleaner signal.
- If using a cheap converter, try a different one – some have poor processing.
- Game looks stretched:
- Change your TV’s aspect ratio to 4:3 or “Normal”.
- Input lag is noticeable:
- Enable “Game Mode” on your TV.
- Some converters add lag; a RetroTINK or OSSC is better.
Frequently Asked Questions
Can I use the PlayStation 2 AV cable on the original PlayStation?
Yes, the PS2’s composite AV cable (the one with yellow, red, white) works on the original PlayStation because they share the same multi-out port. However, the PS2’s component cable (red, green, blue) will not work for video on a PS1 – the PS1 does not output component signals.
Do I need a special HDMI adapter for the PS1?
No, you can use a generic RCA-to-HDMI converter with the standard composite cable. For better quality, you can use a dedicated PS1-to-HDMI adapter that plugs directly into the console’s AV port, or a high-end upscaler like RetroTINK.
Why does my PS1 game look worse than I remember?
CRT TVs naturally masked the low resolution and composite artifacts. On a modern flat-screen, the image is displayed pixel-for-pixel, making it look blockier and softer. An upscaler with smoothing or scanline filters can help, but it won’t match a CRT exactly.
Will the PS1 work on a 4K TV?
Yes, it will work, but the image will be upscaled by your TV or converter to 4K. The original resolution is very low, so it will be blurry. A good upscaler can improve the look, but it won’t be true 4K.
Can I connect the PS1 to a TV without an HDMI converter?
Only if your TV still has composite (yellow/red/white) or S-Video inputs. Most modern TVs don’t, so a converter is usually required.
Why is there no sound when using a SCART to HDMI converter?
Some SCART cables don’t carry audio, or the converter may require a separate audio input. Make sure your SCART cable has audio pins, and if the converter has RCA audio inputs, connect the red/white cables from the console’s AV out (using a breakout cable) to those inputs.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step