sodcalculator

10 Tech How-To

Connect Bluetooth Audio Devices to Google TV

Guide 10-57097 · Updated · Step by step

Pairing Bluetooth headphones, earbuds, or speakers with your Google TV lets you listen privately or fill a room with sound without cable clutter. This guide walks you through the setup process on Google TV (the interface on Chromecast with Google TV, and many Sony, TCL, and Hisense TVs), from opening the right settings menu to connecting your device in under a minute.

What You’ll Need

  • A Google TV device (Chromecast with Google TV, or a TV with Google TV built in).
  • A Bluetooth audio device (headphones, earbuds, or speaker) that is charged or has fresh batteries.
  • The Bluetooth device’s pairing instructions (usually a button to hold to enter pairing mode).
  • Your Google TV remote.

Step-by-Step

  1. Turn on your Google TV and make sure the TV is on the home screen.
  2. Put your Bluetooth device into pairing mode. This typically involves holding a dedicated button (often with a Bluetooth icon) for 5–10 seconds until an LED flashes. Check your device’s manual if you’re unsure.
  3. Open the Settings menu. On the Google TV home screen, scroll to the top-right corner and select the gear icon (Settings).
  4. Navigate to Remote & Accessories. In the Settings menu, scroll down and select “Remote & Accessories.” (On some TV models, this may be under “Bluetooth” or “Connections.”)
  5. Select “Pair remote or accessory.” This option is usually at the top of the Remote & Accessories screen.
  6. Wait for your device to appear. Google TV will scan for nearby Bluetooth devices. Your device’s name (e.g., “Sony WH-1000XM4”) should appear in the list within a few seconds.
  7. Select your device. Click on the device name to begin pairing.
  8. Confirm the pairing code (if prompted). Some devices show a numeric code on the TV screen. Verify it matches the code on your device (if it has a display) and select “Pair” or “OK.”
  9. Wait for the connection. A message like “Connected” will appear. Your audio device is now ready to use.
  10. Test the audio. Play something on your TV to confirm sound comes through the Bluetooth device. If not, check the volume on both the TV and the device.

Common Mistakes

  • Not putting the device in pairing mode. Simply turning on your headphones won’t make them discoverable. You must press and hold the pairing button until the LED flashes rapidly.
  • Looking in the wrong settings menu. On some TVs, Bluetooth settings are under “Sound” or “Connections,” not “Remote & Accessories.” If you don’t see the option, check your TV’s user manual.
  • Having too many paired devices. Google TV can store a limited number of devices. If you’ve paired many before, delete unused ones first (see Troubleshooting).
  • Device is already connected to another source. If your headphones are connected to your phone, they won’t show up on Google TV. Disconnect them from the other device first.
  • Forgetting to turn up the volume. After pairing, the TV’s volume may still be low. Use the TV remote’s volume buttons or the volume controls on your Bluetooth device.

Tips

  • Keep your Bluetooth device close to the TV during pairing (within 3 feet) to avoid interference.
  • For headphones with a companion app (like Sony or Bose), you may want to adjust sound modes in the app before connecting to the TV.
  • Use the TV’s volume buttons to control the Bluetooth audio level; many devices also have their own volume controls, but the TV’s master volume works too.
  • If you frequently switch between TV and phone, consider a device that supports multipoint connection, so you don’t have to re-pair each time.
  • To disconnect but not forget the device, go to Settings > Remote & Accessories, select your device, and choose “Disconnect.” This makes reconnecting faster than re-pairing.

Troubleshooting

  • Device not showing up in the list:
    • Make sure the device is in pairing mode and not connected to another device.
    • Turn off Bluetooth on your phone or other nearby devices to reduce interference.
    • Restart your Google TV (Settings > System > Restart) and try again.
  • Pairing fails or times out:
    • Move the device closer to the TV.
    • If the device has been paired before, delete it from Google TV’s list (Settings > Remote & Accessories > select device > Forget) and start over.
    • Charge your Bluetooth device fully—low battery can cause pairing issues.
  • Audio cuts out or is delayed:
    • Move the Bluetooth device closer to the TV, as walls and distance can cause signal drops.
    • Check for other wireless interference (Wi-Fi routers, microwaves).
    • Some TVs and devices have a “Bluetooth audio delay” setting; look for “A/V sync” or “Audio delay” in the TV’s sound settings and adjust it.
  • Device connects but no sound:
    • Check the volume on both the TV and the Bluetooth device.
    • Make sure the TV is not set to a different audio output (e.g., HDMI ARC). Go to Settings > Display & Sound > Audio output and select “Bluetooth.”
    • Try playing a different app to rule out app-specific issues.
  • Google TV won’t connect to a specific device:
    • Some older Bluetooth devices may not be compatible with Google TV. Check if the device supports Bluetooth 4.0 or later.
    • Reset the Bluetooth device (refer to its manual) and try again.

Frequently Asked Questions

Can I connect multiple Bluetooth devices at once?

Google TV supports connecting multiple Bluetooth devices (like headphones and a remote), but audio is typically routed to only one at a time. You can’t play sound through two headphones simultaneously.

Why does my Bluetooth device keep disconnecting?

This is usually due to distance or interference. Keep the device within 10–15 feet of the TV, and avoid placing obstacles between them. Also, check the battery level—low battery can cause drops.

Will Bluetooth headphones work with all apps on Google TV?

Yes, Bluetooth audio works system-wide, so all apps (Netflix, YouTube, etc.) will route sound to your headphones.

Can I use Bluetooth speakers for surround sound?

Google TV doesn’t support Bluetooth surround sound configurations. For true surround, you’d need a soundbar or receiver connected via HDMI or optical.

How do I unpair a Bluetooth device?

Go to Settings > Remote & Accessories, select the device, and choose “Forget” or “Unpair.”

Does Google TV support Bluetooth 5.0?

Most newer Google TV devices support Bluetooth 5.0, but it depends on the hardware. Check your TV’s specs if you need the latest codecs like aptX.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →