sodcalculator

10 Tech How-To

How to Connect Cricut to Computer

Guide 10-44977 · Updated · Step by step

This guide walks you through connecting your Cricut cutting machine to a Windows PC or Mac, covering both USB and Bluetooth methods. You’ll learn what you need, the exact steps for each connection type, and how to fix common issues so you can start making projects without frustration.

What You’ll Need

  • A Cricut machine (Explore, Maker, or Joy series)
  • A computer running Windows 10/11 or macOS 10.15 or newer
  • A USB cable (if using a wired connection) – usually included with the machine
  • Bluetooth capability on your computer (if using wireless)
  • Your Cricut account login details

Step-by-Step

Before You Begin: Install Design Space

  1. Go to design.cricut.com and click Download for your operating system (Windows or Mac).
  2. Run the installer and follow the on-screen prompts. Create a Cricut account or sign in if you already have one.
  3. Keep Design Space open after installation – you’ll need it to complete the setup.

Method 1: USB Connection (Wired)

  1. Plug the USB cable into the port on your Cricut machine (usually on the back or side).
  2. Plug the other end into an available USB port on your computer.
  3. Turn on your Cricut by pressing the power button.
  4. In Design Space, click the Menu (three lines) in the top-left corner, then select Machine Setup.
  5. Choose your machine model from the list and follow the prompts. Design Space should detect the USB connection automatically.
  6. Complete the firmware update if prompted, then run the test cut when asked.

Method 2: Bluetooth Connection (Wireless)

  1. Turn on your Cricut machine.
  2. On your computer, open Bluetooth settings:
    • Windows: Go to Settings > Devices > Bluetooth & other devices. Toggle Bluetooth on.
    • Mac: Go to System Preferences > Bluetooth. Ensure Bluetooth is on.
  3. Put your Cricut into pairing mode. For most models, press and hold the Bluetooth button on the machine until the light blinks. On Cricut Joy, hold the power button for a few seconds.
  4. In your computer’s Bluetooth list, you should see your Cricut (e.g., “Cricut Maker”). Click Pair or Connect.
  5. Open Design Space. Click Menu > Machine Setup and select your machine.
  6. If prompted, choose Bluetooth as the connection type and select your machine from the list. Complete the setup steps.

Common Mistakes

  • Not turning on the machine before connecting – The Cricut must be powered on for both USB and Bluetooth to work.
  • Using the wrong USB port – Some USB hubs or front-panel ports may not provide enough power. Use a direct port on your computer.
  • Forgetting to update Design Space – An outdated app can cause connection failures. Always update to the latest version.
  • Pairing via Bluetooth but not in Design Space – The machine must be selected inside Design Space, not just paired with the OS.
  • Multiple Cricut devices nearby – If you have more than one, ensure you’re selecting the correct one in both Bluetooth settings and Design Space.

Tips

  • For the most stable connection, especially for large or complex cuts, use USB instead of Bluetooth.
  • Keep your Cricut within 10–15 feet of your computer for reliable Bluetooth.
  • If you switch between USB and Bluetooth, unplug the USB cable first to avoid confusion.
  • After a firmware update, re-pair your Bluetooth connection – updates can reset it.
  • Use the “Test Cut” feature after setup to ensure everything is working before starting a project.

Troubleshooting

Computer doesn’t detect the Cricut via USB

  • Try a different USB port or cable. Some cables are charge-only and don’t transfer data.
  • Restart both the computer and the Cricut machine.
  • Unplug the USB, wait 10 seconds, then plug it back in.
  • Check if the machine appears in Device Manager (Windows) or System Information (Mac). If not, try a different cable.

Bluetooth pairing fails or keeps dropping

  • Turn off Bluetooth on your computer, then turn it back on.
  • Remove the Cricut from your Bluetooth device list and pair again from scratch.
  • Make sure no other devices are interfering (like wireless headphones).
  • Update your computer’s Bluetooth drivers (Windows) or ensure macOS is up to date.

Design Space says “No machine found”

  • Close Design Space completely and reopen it.
  • Ensure the Cricut is powered on and not in sleep mode.
  • If using Bluetooth, confirm the machine is paired in your OS settings first.
  • Try a different connection method (USB if you were on Bluetooth, or vice versa).

Firmware update stuck or fails

  • Leave the machine on and connected; do not unplug during the update.
  • If it fails, restart Design Space and try again.
  • If the issue persists, try connecting via USB instead of Bluetooth for the update.

Frequently Asked Questions

Can I connect my Cricut to a Chromebook?

Yes, but only via USB. Design Space for Chrome OS is available, and Bluetooth is not supported on Chromebooks.

Why won’t my Cricut show up in Bluetooth?

Make sure the machine is in pairing mode (light blinking) and that your computer’s Bluetooth is on. If it still doesn’t appear, restart both devices and try again.

Do I need to connect my Cricut every time I use it?

Yes, the machine needs an active connection to your computer to send cut files. For Bluetooth, it usually reconnects automatically if it was previously paired.

Can I use both USB and Bluetooth at the same time?

No, choose one connection method. Using both can cause conflicts.

My Cricut connects but won’t cut – what should I do?

Check that the correct machine is selected in Design Space, run a test cut, and ensure the mat and material are loaded correctly. Also, verify the blade is not dull or damaged.

Does the Cricut need to be plugged into power while connected?

Yes, the machine must be powered on via its power adapter. USB alone does not power the Cricut.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →