sodcalculator

10 Tech How-To

Control Nanoleaf Lights With Alexa, Google Home, or Apple Home

Guide 10-53999 · Updated · Step by step

This guide shows you how to connect your Nanoleaf light panels, bulbs, or light strips to Amazon Alexa, Google Home, or Apple HomeKit, so you can control them with voice commands, schedules, and automations. You’ll need the Nanoleaf app installed on your phone, a compatible Nanoleaf product, and at least one of the three smart home platforms mentioned. The process is mostly the same across all three, with a few platform-specific steps.

What You’ll Need

  • A Nanoleaf product (Shapes, Canvas, Lines, Essentials bulbs, or light strips) that is already set up and powered on.
  • The Nanoleaf app (iOS or Android) with your Nanoleaf account logged in.
  • A smartphone or tablet with the app for your smart home platform: Amazon Alexa, Google Home, or Apple Home.
  • A stable Wi-Fi network that your Nanoleaf device and your phone are connected to (2.4 GHz is often required for Nanoleaf devices).
  • For Apple HomeKit, an Apple device (iPhone, iPad, or Mac) and, for remote access, an Apple TV, HomePod, or iPad acting as a home hub.

Step-by-Step

Step 1: Set Up Your Nanoleaf Device in the Nanoleaf App

  1. Open the Nanoleaf app on your phone.
  2. If you haven’t already, create a Nanoleaf account or log in.
  3. Tap the “+” icon or “Add Device” and follow the in-app instructions to pair your Nanoleaf product. Make sure it’s powered on and in pairing mode (usually indicated by a blinking light).
  4. Once paired, give your device a recognizable name (e.g., “Living Room Panels”) in the Nanoleaf app. This name will be used in voice commands.

Step 2: Connect to Amazon Alexa

  1. Open the Amazon Alexa app on your phone.
  2. Tap the “Devices” icon at the bottom right, then tap the “+” icon in the top right and select “Add Device.”
  3. Choose “Light” and then select “Nanoleaf” from the list of brands. If you don’t see it, search for “Nanoleaf.”
  4. Tap “Enable” to link your Nanoleaf account. You’ll be asked to log in to your Nanoleaf account and grant permission.
  5. After linking, Alexa will discover your Nanoleaf devices automatically. If it doesn’t, tap “Discover Devices” in the Alexa app.
  6. Once found, your Nanoleaf devices will appear in your device list. You can now say, “Alexa, turn on the living room panels” or “Alexa, set the bedroom light to blue.”

Step 3: Connect to Google Home

  1. Open the Google Home app on your phone.
  2. Tap the “+” icon in the top left, then tap “Set up device.”
  3. Select “Works with Google” (or “Have something already set up?”).
  4. Search for “Nanoleaf” and tap it.
  5. Tap “Link” and log in to your Nanoleaf account to authorize the connection.
  6. Google Home will then sync your Nanoleaf devices. You may need to assign them to rooms (e.g., “Living Room”).
  7. After setup, you can say, “Hey Google, turn on the kitchen lights” or “Hey Google, make the hallway purple.”

Step 4: Connect to Apple HomeKit

  1. Make sure your Nanoleaf device supports HomeKit (most newer models do). Look for the HomeKit code on the product or its packaging.
  2. Open the Nanoleaf app and go to the device settings.
  3. Look for “HomeKit” or “Add to HomeKit” and tap it. The app will guide you to scan the HomeKit setup code with your iPhone’s camera.
  4. Alternatively, open the Apple Home app, tap the “+” icon, and select “Add Accessory.” Scan the HomeKit code or hold your iPhone near the device.
  5. Follow the prompts to add the device to a room (e.g., “Bedroom”).
  6. Once added, you can control it with Siri: “Hey Siri, turn off the bedroom lights” or “Hey Siri, set the living room to 50% brightness.”

Step 5: Create Scenes and Automations (Optional but Recommended)

  1. In the Nanoleaf app, create custom scenes (e.g., “Movie Night” with a dim, warm glow).
  2. For Alexa: Open the Alexa app, go to “Routines,” and create a routine that triggers the Nanoleaf scene when you say a custom phrase or at a set time.
  3. For Google Home: In the Google Home app, tap “Automations” and create a routine that activates the scene based on a voice command or schedule.
  4. For Apple Home: In the Home app, tap “Automation” and set up a scene to run when you arrive home, at sunset, or when you press a physical button.

Common Mistakes

  • Using a different Wi-Fi network: Your phone and Nanoleaf device must be on the same network during setup. If you have a mesh or dual-band router, make sure both are on the same band (2.4 GHz is safest).
  • Not naming devices clearly: Vague names like “Light 1” make voice commands confusing. Use room-specific names like “Kitchen Strip” or “Office Panels.”
  • Skipping the Nanoleaf account: For Alexa and Google Home, you must link your Nanoleaf account. If you skip this, the integration won’t work.
  • Assuming all Nanoleaf products support HomeKit: Some older or cheaper models (like the Essentials bulbs) may not support HomeKit natively. Check the product specs.
  • Not updating firmware: Outdated firmware can cause connection issues. Check for updates in the Nanoleaf app.

Tips

  • Use the same room names across platforms: If you name a room “Living Room” in Nanoleaf, use the same name in Alexa, Google Home, and Apple Home to avoid confusion.
  • Set up a home hub for Apple Home: To control your lights when you’re away from home, you need an Apple TV, HomePod, or iPad at home as a hub.
  • Create a “Good Night” routine: Use a single voice command to turn off all Nanoleaf lights and set other smart devices to your preferred state.
  • Use the Nanoleaf app for advanced color scenes: The Nanoleaf app offers more scene options than the voice assistants. Create your scenes there, then they’ll appear in the assistant apps.
  • Try the “Rhythm” feature: If your Nanoleaf panels support it, you can sync them to music, and you can still control the on/off and brightness via voice.

Troubleshooting

  • Device not discovered: Restart your router, power-cycle the Nanoleaf device, and then try the discovery process again. Also, ensure your phone’s Bluetooth is on (some Nanoleaf devices use Bluetooth for initial setup).
  • “Device is unresponsive” in Alexa or Google Home: This usually means the Nanoleaf device lost its Wi-Fi connection. Unplug it for 10 seconds and plug it back in. Then check if it appears in the Nanoleaf app.
  • HomeKit says “Accessory Not Supported”: Make sure your Nanoleaf device is HomeKit-compatible and that your iPhone is updated to the latest iOS. Also, try resetting the HomeKit code by holding the reset button on the device (check the manual).
  • Voice commands work but scenes don’t: Scenes from the Nanoleaf app may not sync automatically. In the Alexa app, tap “Discover Devices” to refresh. In Google Home, tap “Sync devices.” In Apple Home, the scenes should appear automatically but you may need to restart the Home app.
  • Lights flicker or disconnect frequently: This is often a Wi-Fi signal issue. Move your router closer or use a Wi-Fi extender. Also, avoid placing the Nanoleaf device near metal objects or other electronics that cause interference.

Frequently Asked Questions

Can I control Nanoleaf lights without the internet?

Yes, but only locally. If your Wi-Fi is down, you can still control them via the Nanoleaf app (if on the same network) or via Apple HomeKit if you have a home hub. Voice control through Alexa or Google Home requires internet.

Do I need a Nanoleaf account to use Alexa or Google Home?

Yes, you need to link your Nanoleaf account to Alexa or Google Home. The account is free and allows the cloud-to-cloud connection.

Can I control Nanoleaf lights with both Alexa and Google Home at the same time?

Yes, you can link your Nanoleaf account to both platforms simultaneously. They won’t interfere with each other.

Why won’t my Nanoleaf Essentials bulb appear in HomeKit?

Nanoleaf Essentials bulbs support HomeKit over Thread. If your home doesn’t have a Thread border router (like a HomePod mini or Apple TV 4K), the bulb may not appear. You may need to add a Thread border router or use the Nanoleaf app to set it up with Bluetooth first.

Can I use Siri to change Nanoleaf scenes?

Yes, once added to HomeKit, you can say “Hey Siri, set the scene to Movie Night” if you’ve created that scene in the Home app.

How do I reset my Nanoleaf device to reconnect it?

Most Nanoleaf devices have a small reset button. Press and hold it for about 5 seconds until the lights flash. Then go through the setup process again in the Nanoleaf app.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →