Copying a Blu-ray disc to a blank DVD lets you play your movies on standard DVD players or keep a backup that fits on cheaper media. This guide covers the practical steps for both Mac and Windows, including what software you need and how to handle copy protection and size limits.
What You’ll Need
- A Blu-ray disc you own (the source).
- A blank DVD-R or DVD+R (single-layer holds 4.7 GB, dual-layer holds 8.5 GB).
- A Blu-ray drive that can read discs (external USB drives work on both Mac and Windows).
- A DVD burner (most optical drives that read Blu-ray can also burn DVDs; if not, use a separate DVD burner).
- Software: MakeMKV (free, for ripping) and HandBrake (free, for converting/compressing) on both platforms. For Windows, ImgBurn (free) is useful for burning; on Mac, Disk Utility (built-in) can burn a VIDEO_TS folder.
- Enough free hard drive space: at least 10 GB for the temporary files.
Step-by-Step
- Install the software. Download and install MakeMKV and HandBrake on your computer. On Windows, also install ImgBurn. On Mac, you can use Disk Utility for burning.
- Insert the Blu-ray disc into your Blu-ray drive. If an auto-play window appears, close it. You do not need to play the disc.
- Rip the Blu-ray with MakeMKV. Open MakeMKV. It will show the disc in the left panel. Click the drive icon to load the disc. MakeMKV will scan the disc and list all titles (main movie and extras). Select the main movie title (usually the longest one). Uncheck any extras you don’t need. Choose an output folder on your hard drive. Click the Make MKV button. This creates a single .mkv file that contains the video and audio tracks.
- Check the file size. After ripping, look at the .mkv file size. If it is under 4.7 GB (for a single-layer DVD) or under 8.5 GB (for a dual-layer DVD), you can skip to step 6. If it is larger, you must compress it with HandBrake.
- Convert with HandBrake (if needed). Open HandBrake. Click Open Source and select the .mkv file you just created. Under the Presets panel, choose a preset that targets DVD quality, such as Fast 1080p30 or Very Fast 1080p30. In the Summary tab, set the container to MP4 or MKV. In the Video tab, set the quality (RF) to about 20-22 for good quality. In the Audio tab, choose a compatible audio codec (AAC or AC-3). In the Dimensions tab, you can leave the resolution as is; HandBrake will downscale if needed. Click Start Encode. Wait for the conversion to finish.
- Create a DVD folder structure (optional but recommended). To burn a playable DVD, you need a VIDEO_TS folder. HandBrake does not create this directly. Instead, use a tool like DVDStyler (free, both platforms) or ImgBurn (Windows) to convert your MP4/MKV into a DVD structure. If you are using ImgBurn, you can burn a video DVD directly from a VIDEO_TS folder. If you have a VIDEO_TS folder already, skip to step 7.
- Burn the DVD.
- Windows (ImgBurn): Open ImgBurn. Choose Write files/folders to disc. Select the VIDEO_TS folder as the source. Insert a blank DVD. Set the write speed to a moderate speed (like 4x or 8x) for better compatibility. Click the Write button.
- Mac (Disk Utility): If you have a VIDEO_TS folder, you can burn it with Disk Utility. Open Disk Utility, go to File > Burn Image (or drag the folder to the Disk Utility window). Insert a blank DVD and follow the prompts. Alternatively, use a free tool like Burn (for Mac) to burn a VIDEO_TS folder.
- Verify the disc. After burning, eject and re-insert the DVD. Try playing it in a DVD player or computer. If it plays, you are done.
Common Mistakes
- Ignoring copy protection: Many commercial Blu-rays are encrypted with AACS or BD+. MakeMKV can handle most of these, but some discs may fail. This is not a legal issue for personal backup in many regions, but check your local laws.
- Not checking file size before burning: A 25 GB Blu-ray movie will not fit on a 4.7 GB DVD. Always check the file size and compress if needed.
- Using the wrong DVD type: DVD-R and DVD+R are both fine, but some older players only read one type. If you have a choice, DVD-R is more universally compatible.
- Burning at too high a speed: High write speeds can cause playback errors. Stick to 4x or 8x.
- Not closing the disc: Some burning software leaves the disc open for multi-session. Make sure the disc is finalized so it plays in other devices.
Tips
- Keep the Blu-ray disc in your drive while ripping; MakeMKV reads the disc directly.
- If your Blu-ray disc has multiple audio tracks (e.g., DTS-HD, Dolby TrueHD), select the one you want in MakeMKV to save space.
- Use HandBrake’s Preview feature to check a short clip before doing a full encode.
- For best compatibility with DVD players, set the video to MPEG-2 or H.264 with a bitrate that fits the DVD. HandBrake’s DVD presets are a good starting point.
- If you plan to play the DVD on a computer, you can burn the .mkv file directly as a data disc, but it won’t play in a standard DVD player.
Troubleshooting
- MakeMKV says “No disc inserted” or “Cannot read disc”: Make sure the disc is clean and free of scratches. Try a different Blu-ray drive if you have one. Also, some Blu-ray drives require region settings; ensure your drive is set to the same region as the disc.
- The encoded video is too large for the DVD: Lower the RF value in HandBrake (higher RF = smaller file, but lower quality). Or reduce the resolution to 720p or 480p. You can also use a dual-layer DVD (8.5 GB) if your burner supports it.
- The DVD plays on the computer but not on a standalone player: Your DVD player may not support the video codec (e.g., H.264) or the audio codec (e.g., AAC). Try using MPEG-2 video and AC-3 audio, which are standard for DVD. Also, make sure the disc is finalized.
- Burning fails or freezes: Try a different brand of DVD, lower the write speed, or clean the burner lens. Also, ensure you have enough free hard drive space for the temporary files.
- HandBrake cannot open the .mkv file: Make sure the file is fully ripped. Try re-ripping with MakeMKV, and check that the file is not corrupted.
Frequently Asked Questions
Is it legal to copy a Blu-ray to a DVD?
Laws vary by country. In many places, making a personal backup copy of a disc you own is allowed, but circumventing copy protection may be illegal. Check your local regulations.
Can I copy a Blu-ray directly to a DVD without a computer?
No, you need a computer with a Blu-ray drive and software to handle the conversion. There are no standalone DVD recorders that read Blu-ray.
Why does my Blu-ray movie not fit on a DVD?
A Blu-ray disc holds 25 GB (single-layer) or 50 GB (dual-layer), while a DVD holds only 4.7 GB or 8.5 GB. You must compress the video, which reduces quality.
Will the DVD quality be as good as the Blu-ray?
No. DVD resolution is 480p, while Blu-ray is 1080p. Even if you compress, the DVD will have lower resolution and possibly more compression artifacts.
Can I play the DVD in my Blu-ray player?
Yes, most Blu-ray players can play standard DVDs. However, they may upscale the image, but it won’t be true HD.
Do I need a special DVD for this?
No, any standard DVD-R or DVD+R will work. Use a dual-layer disc if you need more space.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Windows 11 Calendar Wrong Day? Fix It Here
- How to Use curl Command in Linux
- Install ChromeOS: Convert Laptop to Chromebook
- Fix OneNote App Not Working on Android
- Move Games to SSD Without Reinstalling
- Move Windows 11 Taskbar to Top or Side: Easy Steps