This guide walks you through creating a bootable Linux Mint USB drive using a Windows 10 PC. You’ll end up with a USB stick that can boot the Linux Mint live environment, letting you try the OS or install it on your computer. You’ll need a USB drive (8 GB or larger), the Linux Mint ISO file, and a small free tool called Rufus.
What You’ll Need
- A USB flash drive (8 GB or larger; 16 GB is comfortable). All data on it will be erased.
- The Linux Mint ISO file – download the appropriate edition (Cinnamon, MATE, or Xfce) from the official Linux Mint website.
- Rufus – a free, portable USB writer for Windows. Download the standard .exe from the official Rufus website.
- Windows 10 PC with administrator access (or the ability to enter the BIOS/UEFI boot menu).
Step-by-Step
- Back up your USB drive. Everything on the USB will be wiped. Copy any important files to your PC.
- Insert the USB drive into a USB port on your Windows 10 machine.
- Run Rufus. Double-click the Rufus .exe file. You don’t need to install it – it runs directly. If Windows shows a User Account Control prompt, click “Yes” to allow it.
- Select your USB drive in the “Device” drop-down menu at the top of the Rufus window. Make sure you pick the correct drive – Rufus will show its label and size.
- Choose the Linux Mint ISO. Click the “SELECT” button next to “Boot selection”. Browse to the Linux Mint .iso file you downloaded and select it.
- Set the partition scheme. For most modern computers, leave “Partition scheme” as “GPT” and “Target system” as “UEFI (non CSM)”. If your PC is older (pre-2012 or uses legacy BIOS), choose “MBR” and “BIOS or UEFI-CSM”. When in doubt, GPT/UEFI is the right choice for Windows 10-era machines.
- Leave the other settings as defaults. File system should be “FAT32” (Rufus will set this automatically for UEFI boot), cluster size default, and volume label can stay as is or be changed to something like “LINUXMINT”.
- Click “START” at the bottom of the Rufus window.
- Confirm the write warning. Rufus will warn that all data on the USB will be destroyed. Click “OK” to proceed. If you see a dialog about writing in ISO image mode vs DD mode, choose “Write in ISO image mode” (recommended) and click “OK”.
- Wait for the process to finish. Rufus will show a progress bar. It typically takes a few minutes. When it’s done, the status will show “READY” and the USB drive will appear again in Windows Explorer.
- Safely eject the USB drive using the “Safely Remove Hardware” icon in the system tray.
Common Mistakes
- Choosing the wrong USB drive – double-check the drive letter and size in Rufus to avoid wiping another drive.
- Using a USB drive that’s too small – Linux Mint ISOs are around 2–3 GB, but the live system needs extra space. 8 GB is the practical minimum.
- Wrong partition scheme for your PC – if you pick GPT/UEFI for a legacy BIOS system, the USB won’t boot. Conversely, MBR may not boot on a UEFI-only system.
- Not waiting for the process to complete – removing the USB while Rufus is still writing will corrupt it.
- Using a corrupted ISO download – verify the SHA256 checksum on the Linux Mint website if you suspect a bad download.
Tips
- Use a USB 3.0 port (blue interior) for faster booting and installation.
- Keep the USB drive dedicated – you can reuse it later, but each rewrite erases it.
- Test the USB on your PC before relying on it – boot from it to make sure it works.
- Use the official Linux Mint ISO – third-party modified ISOs may contain malware or be unstable.
- If you plan to install Linux Mint alongside Windows, disable Secure Boot in your BIOS first (or use the appropriate Mint version with Secure Boot support).
Troubleshooting
- USB doesn’t boot: Restart your PC and press the boot menu key (often F12, F10, or Esc) to select the USB drive manually. If it still doesn’t boot, check if your PC uses UEFI or legacy BIOS and recreate the USB with the matching partition scheme.
- Rufus says “Device is busy” or “Access denied”: Close any open file explorer windows showing the USB, and make sure no antivirus is scanning it. Try a different USB port.
- Rufus fails with “Error 5: Access denied”: Run Rufus as administrator (right-click → Run as administrator).
- Boot gets stuck at a black screen: Try the “nomodeset” boot option. At the GRUB menu, press ‘e’ to edit the boot entry, find the line starting with “linux”, add “nomodeset” at the end, then press Ctrl+X to boot. This disables graphics driver loading and often fixes boot issues on newer GPUs.
- Windows doesn’t recognize the USB after writing: Windows may show the drive as unreadable because it’s formatted with a Linux-compatible filesystem. That’s normal. To restore it to a normal Windows drive later, use Rufus again or Windows Disk Management to reformat it.
Frequently Asked Questions
Do I need to disable Secure Boot to boot Linux Mint?
Most Linux Mint editions (Cinnamon, MATE, Xfce) support Secure Boot, but some older versions may not. If you encounter boot issues, disable Secure Boot in your BIOS/UEFI settings.
Can I use a USB drive that already has data on it?
Yes, but all existing data will be erased when Rufus writes the ISO. Back up anything important first.
How long does it take to create the bootable USB?
It usually takes 3–10 minutes depending on your USB drive’s speed and the ISO size. A faster USB 3.0 drive will be quicker.
Can I use this USB to install Linux Mint on multiple computers?
Yes, the USB is reusable. You can boot and install Linux Mint on as many computers as you like, as long as they support the same boot mode (UEFI or legacy).
What’s the difference between GPT and MBR?
GPT is the modern partition table standard for UEFI systems; MBR is older and used for legacy BIOS. Most PCs from the last 10 years use UEFI with GPT.
Can I create the bootable USB with another tool like Etcher?
Yes, BalenaEtcher is a popular alternative that works on Windows, macOS, and Linux. The steps are similar: select the ISO, select the USB, and flash.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font