sodcalculator

10 Tech How-To

How to Create a Dial-Up Connection in Windows 10

Guide 10-47064 · Updated · Step by step

Dial-up internet may feel like a relic, but it still works as a backup connection or in areas where broadband isn’t available. This guide shows you how to set up a dial-up connection in Windows 10, including the exact menus to click and settings to enter. You’ll need an active phone line, a dial-up modem (internal or USB), and the access phone number, username, and password from your ISP.

What You’ll Need

  • A working dial-up modem installed and recognized by Windows 10 (check Device Manager under “Modems”)
  • A landline phone jack with an active dial tone
  • A phone cable to connect the modem’s “Line” port to the wall jack
  • Your ISP’s dial-up access phone number, username, and password
  • If your modem is USB, make sure its drivers are installed (check the manufacturer’s website if Windows doesn’t detect it automatically)

Step-by-Step

  1. Connect the modem. Plug the modem into your PC (internal card or USB). Connect a phone cable from the modem’s port labeled “Line” or “Wall” to the telephone wall jack. If you have a phone on the same line, plug it into the modem’s “Phone” port.
  2. Open Network Settings. Click the Start button (Windows icon) and select the gear icon to open Settings. Alternatively, press Windows + I.
  3. Go to Network & Internet. In Settings, click “Network & Internet.”
  4. Open Dial-up settings. In the left sidebar, click “Dial-up.” If you don’t see it, your modem may not be detected—check Device Manager.
  5. Set up a new connection. Click “Set up a new connection.” (If you already have a dial-up connection listed, you can skip to step 9.)
  6. Choose connection type. In the wizard, select “Connect to the Internet” and click “Next.”
  7. Select dial-up. Click “Dial-up” (it’s usually the bottom option).
  8. Enter your ISP details. Fill in:
    • Dial-up phone number: e.g., 555-1234 (include any prefix like 9 for an outside line if required)
    • Username: provided by your ISP
    • Password: provided by your ISP
    • Connection name: anything you like, e.g., “My Dial-Up”

    Check “Remember this password” if you don’t want to type it each time. Click “Connect” to test, or “Create” to save without connecting.

  9. Connect manually. To dial up later, go to Settings > Network & Internet > Dial-up, click your connection, and choose “Connect.” Enter your password if prompted, then click “Dial.”
  10. Verify the connection. Once connected, you’ll see a notification in the system tray. Open a browser to test. The connection speed will show in the network settings, typically 28.8–56 kbps.

Common Mistakes

  • Plugging the phone cable into the wrong port. The line must go into the “Line” port, not “Phone.” Swapping them causes connection failures.
  • Using a digital phone line. Dial-up requires an analog line. Office PBX systems or VoIP adapters often don’t work.
  • Forgetting the area code. If you’re dialing outside your local area, include the full number with area code. Some ISPs require a prefix like “9” for outside lines—check with your provider.
  • Modem not detected. Windows 10 dropped support for many older modems. If the modem doesn’t appear in Device Manager, try a different USB port or reinstall drivers.
  • Call waiting interference. If you have call waiting, a second incoming call can drop your connection. Disable it temporarily by dialing *70 before the number (e.g., *70,555-1234).

Tips

  • Keep the phone line quiet. Any noise on the line (static, other devices) reduces speed. Try a different wall jack if possible.
  • Disable call waiting. Add *70 before the number to prevent interruptions. This is a standard code in the US; check your local code if you’re elsewhere.
  • Use a short, direct cable. Long or coiled cables can degrade the signal. Keep the modem close to the wall jack.
  • Turn off automatic updates. Large downloads can tie up the line for hours. Set Windows Update to manual or metered connection mode.
  • Create a desktop shortcut. Right-click your connection in Dial-up settings, choose “Create shortcut,” and place it on your desktop for one-click dialing.
  • Check for driver updates. Visit the modem manufacturer’s website for Windows 10 compatible drivers, especially for older models.

Troubleshooting

Modem not recognized: Open Device Manager (right-click Start > Device Manager). Look under “Modems” for your device. If it has a yellow exclamation mark, right-click and “Update driver.” If it’s missing entirely, try a different USB port or reinstall the driver from the manufacturer.

Error 692 or 734 (hardware failure): This usually means the modem isn’t responding. Restart your PC, check the modem is properly seated (internal) or connected (USB), and try again.

Error 680 (no dial tone): The modem can’t detect a dial tone. Check the phone cable is in the “Line” port and the wall jack works by plugging in a regular phone. If the phone works, the issue is the modem or cable.

Connection drops after a few minutes: This is often due to line noise or call waiting. Try adding *70 to the number, or contact your phone company about line quality.

Can’t connect to specific websites: Dial-up is slow; some sites may time out. Try a lightweight browser like Opera or enable “Lite mode” in Chrome. Also, check your DNS settings—use 8.8.8.8 and 8.8.4.4 as a test.

Windows says “The remote computer did not respond”: The ISP’s access number may be wrong or busy. Double-check the number, try again later, or contact your ISP for an alternate number.

Frequently Asked Questions

Can I use a dial-up modem with Windows 10? Yes, but support is limited. Most external USB modems with a chipset like the Conexant or Intel 537 work if you install compatible drivers. Internal PCI modems often lack Windows 10 drivers—check the manufacturer’s site.

What is the maximum speed of dial-up? The theoretical maximum is 56 kbps for downloads and 33.6 kbps for uploads, but real-world speeds are usually 28.8–48 kbps due to line quality and FCC regulations.

Do I need a phone line dedicated to internet? No, but if someone picks up the phone while you’re online, the connection will drop. You can add a second line or use a DSL filter to reduce noise, but the call will still interrupt.

How do I remove a dial-up connection? Go to Settings > Network & Internet > Dial-up, click the connection, and select “Forget.” This removes it from your PC.

Can I share a dial-up connection with other devices? Yes, you can enable Internet Connection Sharing (ICS) in the network adapter properties, but the speed will be split among all devices and the connection will be very slow for multiple users.

Why is my dial-up connection so slow? Dial-up is limited by the phone line’s bandwidth. Factors like line noise, distance from the phone exchange, and modem quality all affect speed. There’s no way to exceed the 56 kbps limit.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →