If the new Camera Control button on your iPhone 16, 16 Plus, 16 Pro, or 16 Pro Max keeps getting pressed accidentally, or you simply prefer using the on-screen shutter button, you can turn it off. This guide shows you exactly how to disable the Camera Control button’s actions—either entirely or just the parts that annoy you—without affecting the rest of your phone.
What You’ll Need
- An iPhone 16, 16 Plus, 16 Pro, or 16 Pro Max running iOS 18 or later.
- Your passcode or Face ID to confirm settings changes (if you have Screen Time restrictions enabled).
Step-by-Step
- Unlock your iPhone and go to the home screen.
- Open the Settings app (the gray gear icon).
- Scroll down and tap “Camera.” It’s usually near the middle of the Settings list, between “Apps” and “Notes.”
- Tap “Camera Control” near the top of the Camera settings page. This is a dedicated section for the physical button on the side of your iPhone.
- To disable the button entirely: Toggle off “Camera Control” at the very top. This turns off the button completely—pressing it will do nothing, and it won’t launch the Camera app from the lock screen either.
- To keep the button but disable specific actions: Leave the top toggle on, then adjust the following options below it:
- “Click to Open” – Turn this off if you don’t want a single press to open the Camera app.
- “Click to Capture” – Turn this off if you want to open the camera but not take a photo with a single press.
- “Press and Hold” – Turn this off to disable the video recording shortcut when you press and hold the button.
- “Double Click” – Turn this off to disable the quick menu for camera settings (zoom, exposure, depth, etc.).
- If you want to disable the button only in third-party apps: Scroll down to “Apps” within the Camera Control settings. You’ll see a list of apps that use the button. Toggle off any app where you don’t want the button to work.
- Exit Settings when you’re done. Your changes save automatically.
Common Mistakes
- Turning off the wrong toggle: The top “Camera Control” toggle is the master switch. If you only turn off “Click to Capture” but leave the master on, the button will still open the Camera app—which might not be what you want.
- Confusing “Camera Control” with “Use Volume Up for Burst” – These are separate settings. The Camera Control button is on the side of the phone (below the power button), not the volume buttons.
- Expecting the button to be disabled on the lock screen: If you turn off the master toggle, the button won’t launch the camera from the lock screen. But if you only disable “Click to Capture,” the button will still open the Camera app from the lock screen.
- Forgetting that the button still works in apps you didn’t change: If you only disable it in the Camera app, it may still open the camera in Instagram, Snapchat, or other apps that support it. Check the “Apps” list.
Tips
- Use the “Apps” section to keep the button for your favorite camera apps but disable it for others. For example, you might want it in the native Camera but not in social media apps.
- If you accidentally press the button often, consider turning off “Click to Open” and “Click to Capture” but leaving “Press and Hold” on. That way, a quick accidental press does nothing, but a deliberate press-and-hold still records video.
- You can always re-enable everything later by toggling the master switch back on. Your custom per-app settings will be preserved.
- If you want to temporarily disable the button without going into Settings, you can’t do it from the Control Center. The only way is via the Settings menu.
- Keep your iPhone updated. Apple occasionally changes the names of these settings in iOS updates. If you don’t see “Camera Control” in the Camera settings, check for a software update.
Troubleshooting
I turned off the master toggle, but the button still opens the camera.
This can happen if you have an older iOS version or if the setting didn’t save. Go back to Settings > Camera > Camera Control and make sure the toggle is off (gray). If it’s off but still not working, restart your iPhone by holding the side button and either volume button until the power off slider appears, then slide to power off and turn it back on.
I don’t see “Camera Control” in my Camera settings.
This option only appears on iPhone 16 series models. If you have an iPhone 15 or earlier, you won’t have this button. Also, make sure your phone is running iOS 18 or later. Go to Settings > General > Software Update to check.
I disabled “Click to Capture,” but the button still takes photos.
Check if you have “Click to Open” still on. If you press the button once, it opens the Camera app; then if you press it again while the camera is open, it will take a photo because “Click to Capture” is now active. To fully prevent photos, turn off both “Click to Open” and “Click to Capture.”
My third-party apps still use the button even after I toggled them off.
Some apps may have their own settings for the Camera Control button. Check the app’s own settings or update the app. If the issue persists, report it to the app developer.
The button is disabled but the camera app still opens when I press it from the lock screen.
This is a known behavior if you have “Click to Open” enabled. If you want to prevent the camera from opening from the lock screen, you must turn off “Click to Open.” Alternatively, you can disable the camera on the lock screen entirely by going to Settings > Face ID & Passcode and turning off “Camera” under “Allow Access When Locked.”
Frequently Asked Questions
Will disabling Camera Control affect the camera quality?
No, it only disables the physical button. The camera hardware and software remain unchanged.
Can I disable the button only for a specific app?
Yes. Go to Settings > Camera > Camera Control > Apps, and toggle off the apps where you don’t want the button to work.
Does the Camera Control button work when the phone is locked?
By default, a single press opens the Camera app from the lock screen. If you turn off “Click to Open,” the button will do nothing when the phone is locked.
Will this save battery?
Disabling the button prevents accidental camera launches, which can save a small amount of battery because the camera app won’t start unexpectedly.
Can I remap the Camera Control button to do something else?
No, Apple does not allow remapping this button to other functions. You can only enable or disable its camera-related actions.
If I reset all settings, will the Camera Control come back?
Yes, resetting all settings will restore the default Camera Control behavior. You’ll need to disable it again if you want it off.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix msmpeg2vdec.dll Errors in Windows
- How to Update Sonos App and Speakers
- Unlock iPad Without Apple ID: Is It Possible?
- iOS 18 WhatsApp Notifications Not Working? Fix
- Fix Windows Cannot Locate Suitable Printer Driver
- How to Group Text and Pictures in Word