sodcalculator

10 Tech How-To

Disable QR Code Scanner in iPhone Camera

Guide 10-50413 · Updated · Step by step

This guide shows you how to turn off the automatic QR code scanner in the iPhone Camera app, so scanning a code no longer pops up a notification or opens a website. You only need your iPhone with iOS 11 or later, and the change takes effect immediately.

What You’ll Need

  • An iPhone running iOS 11 or newer (the steps are identical on recent versions)
  • Access to the Settings app (it’s preinstalled)

Step-by-Step

  1. Unlock your iPhone and go to the Settings app. It’s the gray gear icon on your home screen.
  2. Scroll down the Settings list and tap Camera. It’s usually about halfway down, between “Contacts” and “Mail.”
  3. In the Camera settings, look for a section labeled “Scan QR Codes”. It’s near the top, under “Preserve Settings.”
  4. Tap the green toggle next to “Scan QR Codes” to turn it off. The toggle will turn gray, and the feature is now disabled.
  5. Exit Settings. The change saves automatically—there’s no confirm button.
  6. Open the Camera app and point it at any QR code to confirm. You should no longer see a banner notification or a link appear at the top of the screen.

Common Mistakes

  • Turning off the wrong toggle: Some users accidentally disable “Scan Text” (Live Text) instead. That’s a separate feature that recognizes text in the viewfinder. Make sure you’re toggling “Scan QR Codes,” not “Scan Text.”
  • Looking for the option in the Camera app itself: There’s no in-app setting. You must go to the Settings app—the Camera app only has a small settings icon in the top corner for formats and resolution, not QR scanning.
  • Assuming the toggle is under “Privacy”: It’s not. Some guides suggest checking Camera permissions, but that only controls which apps can use the camera, not whether the Camera app scans QR codes.
  • Forgetting that the toggle resets after an iOS update: Major iOS updates can sometimes reset settings, so you may need to re-disable it after updating.

Tips

  • If you only want to block QR codes from opening websites but still want to see the code’s content, you can leave scanning on and simply ignore the banner—it won’t open anything unless you tap it.
  • To quickly re-enable scanning later, just flip the toggle back on. It’s a one-tap change.
  • If you’re trying to avoid QR codes for privacy reasons, also check your other camera apps (like Google Lens or third-party scanners) as they may have their own settings.
  • You can still scan QR codes with the Control Center’s built-in scanner (if you’ve added it) even when the Camera’s scanner is off—that’s a separate tool.

Troubleshooting

If you’ve followed the steps but QR codes still trigger notifications, try these fixes in order:

  1. Restart the Camera app: Swipe up from the bottom (or double-click the Home button on older models) to open the app switcher, then swipe the Camera app away. Reopen it and test again.
  2. Check for an iOS update: Go to Settings > General > Software Update. If an update is pending, install it—sometimes a glitch in the current version can cause the toggle to not work properly.
  3. Reset all settings: If the toggle still doesn’t work, go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. This won’t delete your data, but it will reset all system preferences, including the QR toggle. You’ll need to re-disable it afterward.
  4. Restart your iPhone: A simple restart often resolves minor software hiccups. Press and hold the side button and either volume button until the power off slider appears, then slide to power off, wait a few seconds, and turn it back on.
  5. Check for a profile or restriction: If you’re using a work or school iPhone with a configuration profile, it might enforce QR scanning. Go to Settings > General > VPN & Device Management to see if any profiles are installed. If so, contact your administrator.

Frequently Asked Questions

Will disabling QR code scanning affect other camera features?

No. It only stops the automatic detection of QR codes. All other camera functions—photos, video, portrait mode, and Live Text (if supported)—remain unchanged.

Can I still scan QR codes after turning this off?

Yes. You can use the built-in Control Center scanner (if you’ve added it), or open a third-party QR scanner app. The Camera app simply won’t detect them automatically.

Why would I want to disable it?

Some people find the banner notification distracting, or they’re concerned about accidentally opening a malicious link. Disabling it gives you more control over when you scan a code.

Does this work on all iPhone models?

Yes, the setting exists on every iPhone that supports iOS 11 or later, including all models from iPhone 5s onward. The steps are identical across all of them.

Will the toggle turn back on by itself?

No, it stays off until you manually turn it on. However, as mentioned, a major iOS update or a “Reset All Settings” could revert it, so check after such events.

Is there a way to disable QR scanning only for certain apps?

No, the Camera app’s setting is global. If you want per-app control, you’d need to use third-party camera apps that have their own QR scanning settings.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →