Windows 11 sometimes shows a warning that “Local Security Authority protection is off” in the Windows Security app. This alert appears when the LSA protection feature, which helps prevent credential theft, is disabled or not running properly. This guide explains how to dismiss the warning by re-enabling LSA protection, and what to do if the toggle is grayed out or the warning persists.
What You’ll Need
- Administrator access to your Windows 11 PC
- Windows 11 (version 22H2 or later is recommended, as LSA protection is a standard feature)
- Optional: a backup of your registry before making changes
Step-by-Step
- Open Windows Security: Click the Start button, type “Windows Security,” and press Enter. Alternatively, go to Settings > Privacy & Security > Windows Security.
- Navigate to Device Security: In the left sidebar, click “Device security.” Under the “Core isolation” section, click “Core isolation details.”
- Check LSA Protection: Look for the “Local Security Authority protection” toggle. If it’s off, turn it on. If it’s already on but the warning persists, proceed to the next steps.
- Restart Your PC: After enabling the toggle, restart your computer. The warning should disappear after a clean boot.
- If the Toggle is Grayed Out: Open the Registry Editor (type “regedit” in Start, right-click and select “Run as administrator”). Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa. Find theRunAsPPLDWORD (32-bit) value. If it doesn’t exist, create it (right-click > New > DWORD (32-bit) Value). Set its value to2(or1if you prefer a less strict mode). Close the editor and restart. - If the Warning Still Shows After Restart: Open an elevated Command Prompt (search “cmd”, right-click, “Run as administrator”). Run the command
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Lsa" /v RunAsPPL /t REG_DWORD /d 2 /fand press Enter. Then restart. - Check for Conflicting Software: Some third-party security or driver software can interfere with LSA protection. Temporarily disable or uninstall such software, then re-enable LSA protection and restart.
- Update Windows: Ensure your Windows 11 is fully updated. Go to Settings > Windows Update and click “Check for updates.” Install any pending updates, then restart.
- If All Else Fails: Use the Windows Security app’s “Reset” option. In Windows Security, go to Settings > Reset the app. This reinitializes security settings, but you may need to re-enable LSA protection afterward.
Common Mistakes
- Not restarting after enabling: The warning will not clear until you restart the system.
- Using the wrong registry value: Setting
RunAsPPLto0disables LSA protection; use1or2. - Editing the registry without admin rights: You must run regedit as administrator, otherwise changes won’t save.
- Ignoring driver conflicts: Incompatible drivers (especially older ones) can block LSA protection. Check for driver updates in Device Manager.
Tips
- Keep LSA protection on: It’s a security feature that helps prevent credential theft. Only turn it off if you have a specific compatibility issue.
- Use the registry method for stubborn cases: The registry method often works when the toggle is grayed out.
- Create a system restore point: Before editing the registry, create a restore point (search “Create a restore point” in Start).
- Check Event Viewer: If the warning persists, look for LSA-related errors in Event Viewer (eventvwr.msc) under Windows Logs > System.
Troubleshooting
If the warning remains after following the steps, try these additional checks:
- Run the Windows Security troubleshooter: Go to Settings > System > Troubleshoot > Other troubleshooters, and run “Windows Security” troubleshooter.
- Check for malware: Run a full scan with Windows Defender or a trusted third-party antivirus.
- Repair system files: Open Command Prompt as administrator and run
sfc /scannowand thenDISM /Online /Cleanup-Image /RestoreHealth. Restart after. - Check if LSA protection is actually running: Press Win+R, type
msinfo32, and look for “Virtualization-based security” and “LSA protection” in the System Summary. If it says “Running”, the warning may be a false positive; try updating your graphics drivers. - If you recently installed new hardware or drivers: Roll back the driver or uninstall the hardware temporarily to see if the warning disappears.
Frequently Asked Questions
Why is LSA protection off by default?
On some systems, LSA protection may be disabled by default if the hardware or drivers don’t support it, or if an older version of Windows 11 is installed. Microsoft enables it by default on newer builds.
Will enabling LSA protection slow down my PC?
No noticeable performance impact. It runs in the background and only adds a small overhead when processes access the LSA.
Can I disable LSA protection permanently?
Yes, but it’s not recommended. You can set the registry value to 0 or turn off the toggle, but this reduces security. Only do this if you have a specific compatibility issue.
What does the ‘RunAsPPL’ value of 2 mean?
Value 2 enables LSA protection with additional restrictions (like blocking unsigned plugins). Value 1 enables it without those extra restrictions. Microsoft recommends 2.
Why is the toggle grayed out?
This usually happens when the feature is controlled by group policy or when the system doesn’t meet the requirements (e.g., virtualization-based security not available). Check Group Policy Editor (gpedit.msc) under Computer Configuration > Administrative Templates > System > LSA.
Does the warning affect my PC’s performance?
No, the warning is informational. Your PC will still function normally, but you are at a higher risk of credential theft.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step