sodcalculator

10 Tech How-To

Partition to Partition Clone in Windows: Exact Copy

Guide 10-45815 · Updated · Step by step

Cloning a partition to another partition in Windows creates an exact, byte-for-byte copy of the source drive section, including the operating system, installed programs, files, and even the boot records. This is useful for upgrading to a larger drive, backing up a system before major changes, or duplicating a setup for another machine. You’ll need a third-party cloning tool (Windows has no built-in partition clone feature), enough free space on the destination partition (it must be at least as large as the used space on the source), and administrative access to your PC.

What You’ll Need

  • A reliable partition cloning tool (e.g., Macrium Reflect Free, EaseUS Todo Backup, Acronis True Image, or Clonezilla).
  • The source partition (the one you want to copy).
  • The destination partition (the target). It must be unallocated space or a partition you can overwrite — any existing data on it will be erased.
  • Enough free space on the destination to hold the source’s used data (not the full partition size if the source has free space).
  • An external backup of any critical data on the destination, just in case.
  • Windows running with administrator privileges.

Step-by-Step

  1. Back up the destination partition. Before you start, move any files you need from the destination to another drive. The cloning process will completely overwrite it.
  2. Install and launch your chosen cloning tool. Download it from the official website, run the installer, and open the application. Accept any license agreements and allow it to make system changes if prompted.
  3. Select the “Clone” or “Copy” function. Most tools have a prominent button labeled “Clone,” “Copy Partition,” or “Migrate OS.” For a single partition, choose “Partition Clone” or “Clone Partition” (not “Disk Clone”).
  4. Choose the source partition. In the selection screen, click the partition you want to copy. Make sure you select the correct one — usually the C: drive or the one with your OS. Confirm the drive letter and size.
  5. Choose the destination partition. Select the target partition or unallocated space. If you’re cloning to an existing partition, the tool will warn you that all data on it will be destroyed. Double-check that you have the right target.
  6. Set advanced options (if available). Look for options like “Copy all sectors” or “Sector-by-sector.” For an exact clone, enable this. If the destination is smaller than the source, you may see a “Shrink” or “Resize” option — but for an exact copy, the destination should be equal or larger. If the tool offers “Align partitions” or “Optimize for SSD,” leave the default.
  7. Review the summary and start. The tool will show a summary of what you’re about to do. Verify the source and destination are correct, then click “Start,” “Proceed,” or “Finish.”
  8. Wait for the process to complete. Cloning can take from a few minutes to over an hour depending on the partition size and drive speed. Do not interrupt it, and do not use the computer for heavy tasks during the process.
  9. Restart and verify. Once done, restart your computer. If you cloned to a new drive, you may need to enter the BIOS/UEFI to set the new drive as the boot device. If you cloned to a partition on the same drive, you can check the result by opening Disk Management and comparing the partition contents.

Common Mistakes

  • Choosing the wrong source or destination. This is the most common error. Always double-check the drive letters and sizes. A mistake can wipe out your data.
  • Cloning to a partition that is too small. If the destination has less space than the source’s used space, the clone will fail or be incomplete. Check the used space of the source (right-click > Properties) before starting.
  • Forgetting to back up the destination. Even if you think you don’t need the data, back it up. Accidents happen.
  • Interrupting the process. Unplugging the drive, losing power, or force-closing the tool can corrupt the clone and the source.
  • Not enabling sector-by-sector mode. If you want an exact copy, make sure you select that option. Some tools default to a “smart copy” that skips unused sectors, which is not a true bit-for-bit clone.
  • Cloning a partition that is in use. If the source is the system partition, some tools require a reboot or a special pre-OS environment. Follow the tool’s instructions for “hot clone” or “schedule for reboot.”

Tips

  • Use a tool that supports “hot cloning” so you can clone the system partition while Windows is running, without needing a bootable CD.
  • If the destination is an SSD, consider enabling “SSD alignment” or “Optimize for SSD” in the cloning options to maintain performance.
  • Before cloning, run a disk check (chkdsk) on the source partition to avoid cloning errors from file system corruption.
  • Disconnect any unnecessary external drives to avoid accidentally selecting them as the destination.
  • After cloning, if you plan to boot from the new partition, you may need to repair the boot configuration. Tools like Macrium Reflect include a “Fix Boot Problems” option.
  • Keep the source partition intact until you’ve verified the clone works. Don’t delete or format it right away.

Troubleshooting

Clone fails with “not enough space.” Check the source’s used space and ensure the destination has at least that much free space. If the destination is smaller, you cannot do an exact clone — you’ll need a larger target or a resize (which is not exact).

Clone completes but the new partition won’t boot. This often happens when cloning a system partition. Use the tool’s “Fix Boot” feature, or boot from a Windows installation USB and run bootrec /fixmbr and bootrec /rebuildbcd in Command Prompt.

The destination partition shows as RAW or unallocated after cloning. This usually means the clone was interrupted or the sector-by-sector copy was not done. Re-run the clone from scratch, making sure the process finishes without interruption.

The tool says the source is locked. If the source is the system partition, you need to schedule the clone for the next reboot or use the tool’s bootable rescue environment. Most tools guide you through this.

The clone is slower than expected. Large partitions and mechanical drives take time. Ensure no other heavy disk activity is happening. If the source has bad sectors, the process may hang — run chkdsk first.

Frequently Asked Questions

Can I clone a partition to a smaller partition?

Only if the source’s used space is smaller than the destination’s capacity. Even then, some tools will refuse or require a resize option. For an exact clone, the destination must be at least as large as the source’s used space.

Is cloning the same as copying files?

No. Copying files only copies the data, not the boot records, partition table, or file system metadata. Cloning creates a bootable, exact replica of the partition structure.

Do I need to buy software to clone a partition?

No. Several free tools like Macrium Reflect Free and Clonezilla offer full partition cloning. They may lack advanced features of paid versions, but the basic clone function works well.

Can I clone a partition to a different file system (e.g., NTFS to FAT32)?

No. A clone is a bit-for-bit copy, so the destination will have the same file system as the source. To change file systems, you’d need to copy files and format the target separately.

Will cloning a partition erase my data on the destination?

Yes. The cloning process overwrites the destination partition completely. Always back up any data on the target before starting.

How long does a partition clone take?

It depends on the size of the source partition and the speed of both drives. A 100 GB partition on a SATA SSD to another SSD can take 10-20 minutes; on mechanical drives, it can take over an hour.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →