sodcalculator

10 Tech How-To

How to Downgrade to Unsigned iOS

Guide 10-56848 · Updated · Step by step

Downgrading an iPhone or iPad to an iOS version that Apple no longer signs is a way to return to an older, more stable, or more familiar operating system. When Apple stops signing a version, the normal restore path through Finder or iTunes refuses it, but with the right saved files and a few extra steps, you can still get there. This guide walks you through the process, what you need before you start, and how to recover if something goes wrong.

What You’ll Need

  • A computer running macOS or Windows with the latest version of Finder (macOS Catalina or later) or iTunes (Windows or older macOS).
  • A USB cable that can transfer data (not just charge).
  • The IPSW file for the exact iOS version you want to install. You can download it from a trusted mirror site like IPSW.dev or the iOS Firmware Download page on ipsw.me.
  • Your device’s unique identifier (ECID) and your Apple ID credentials. The ECID is a long hex number found in iTunes/Finder when the device is in recovery mode.
  • Third-party tools like FutureRestore (for Mac/Linux) or a Windows equivalent (e.g., iRemovalPRO or ReiBoot) that can restore unsigned firmware. These are community-developed and may change, so check current guides for the latest tool.
  • A backup of your data. Downgrading erases everything on the device, so back up to iCloud or your computer beforehand.
  • Patience and a stable internet connection. The process can take 20–60 minutes and may require several attempts.

Step-by-Step

  1. Check signing status. Before you begin, confirm that the iOS version you want is no longer signed. Apple usually stops signing older versions within a few weeks after a new release. You can check at ipsw.me or by trying to restore that IPSW normally – if it fails with an error like “This device isn’t eligible for the requested build,” it’s unsigned.
  2. Back up your device. Connect your iPhone or iPad to your computer, open Finder or iTunes, and make a full backup to your computer. Also, ensure you have your Apple ID password and any two-factor authentication codes handy, as you’ll need them after the restore.
  3. Download the IPSW file. Find the exact IPSW for your device model and the iOS version you want. Make sure the file name matches your device (e.g., iPhone12,1 for iPhone 11). Save it to a folder you can easily find, like your Desktop.
  4. Put your device into recovery mode. The method varies by device:
    • iPhone 8 or later, iPad with Face ID: Press and quickly release Volume Up, then Volume Down, then press and hold the Side button until the recovery mode screen appears.
    • iPhone 7/7 Plus: Press and hold the Side (or Top) button and the Volume Down button together until the recovery mode screen shows.
    • iPhone 6s and earlier, iPad with Home button: Press and hold the Home button and the Top (or Side) button simultaneously until the recovery mode screen appears.
  5. Get your ECID. With the device in recovery mode, open Finder or iTunes on your computer. A dialog will appear saying there’s a problem with the device and offering to Restore or Update. Do not click either yet. Instead, look for the device’s serial number or ECID. In Finder, click on the device name in the sidebar, then click “General” – the ECID is shown as a long hexadecimal number. In iTunes, hover over the device icon and the ECID appears in the summary. Write it down or copy it.
  6. Set up FutureRestore (or your chosen tool). Download the latest FutureRestore for your operating system. You’ll also need the SEP and baseband firmware files from the *current* iOS version (the one Apple is still signing). These are contained in the latest IPSW for your device. Extract them using a tool like ipsw.me’s extractor or a command-line utility. This step is technical and varies by tool; follow the specific instructions for your tool.
  7. Restore with FutureRestore. Open a terminal (Mac/Linux) or command prompt (Windows) in the folder where FutureRestore is located. Run a command similar to:
    futureRestore -t shsh2.shsh -b baseband.bbfw -p BuildManifest.plist -s sep.im4p -m BuildManifest.plist -i your_ios.ipsw

    Replace the file names with your actual files. The -t flag points to your saved SHSH2 blobs (if you have them), which are required for A12+ devices. For older devices, you may not need blobs, but you still need the SEP and baseband from the current iOS. The tool will put your device into a custom restore process.

  8. Wait for the restore to finish. The device will reboot several times. Do not unplug it. When the progress bar completes and the device shows the “Hello” screen, it’s done. If you see an error, refer to the Troubleshooting section below.
  9. Set up your device. After the restore, you’ll go through the normal setup. Restore from your backup if you want your data back. Note that some data (like Health data) may not restore if the backup is from a newer iOS version.

Common Mistakes

  • Using the wrong IPSW. Downloading an IPSW for the wrong device model is the most common error. Always double-check the model number (e.g., A2111 for iPhone 11 Pro) against your device’s model.
  • Skipping the SHSH2 blobs. For iPhone XS and newer (A12 chip and later), you must have saved SHSH2 blobs for the target version while it was still being signed. Without them, the restore will fail. Older devices can sometimes downgrade without blobs using a method called “tethered downgrade,” but it’s more complicated.
  • Not extracting the SEP and baseband correctly. The SEP (Secure Enclave Processor) and baseband firmware must be from the *current* iOS, not the target version. Using the wrong ones causes the restore to fail with an error.
  • Interrupting the process. Unplugging the device or closing the terminal during the restore can leave your device in a bricked state (though it’s usually recoverable). Let it run.
  • Forgetting to back up. Downgrading wipes your device. If you don’t back up, you lose everything.

Tips

  • Save blobs early. If you think you might want to downgrade in the future, save SHSH2 blobs for every iOS version as soon as it’s released. Tools like TSS Saver can do this automatically if you set them up.
  • Use a wired connection. A stable USB connection is crucial. Avoid USB hubs and use a port directly on your computer.
  • Disable Find My iPhone. Turn off Find My iPhone in Settings before you start, as it can interfere with the restore process.
  • Check for tool updates. FutureRestore and similar tools are updated frequently to support new devices and iOS versions. Always download the latest version.
  • Keep the IPSW. Once you download an IPSW, keep it. Apple may remove older files from their servers, but mirrors often keep them.

Troubleshooting

  • Error “This device isn’t eligible for the requested build.” This means the version is unsigned and you didn’t use the correct method. Make sure you have the right blobs and are using FutureRestore, not the normal restore.
  • Restore fails with error 4013 or 4014. These are often USB-related. Try a different cable, port, or computer. Also, ensure your device is fully charged.
  • Device stuck in recovery mode. If the restore fails and your device stays in recovery, you can force restart it (press and release Volume Up, then Volume Down, then hold Side until the Apple logo appears). Then try the restore again.
  • FutureRestore crashes or gives a “futurerestore.exe has stopped working” error. This is often due to missing dependencies. On Windows, install the latest version of Microsoft Visual C++ Redistributable. On Mac, ensure you have the latest Xcode command line tools.
  • Boot loop after restore. If the device keeps restarting, you may have used the wrong SEP or baseband. Re-extract them from the current IPSW and try again.
  • Cannot find the ECID. If the ECID isn’t showing, make sure your device is actually in recovery mode and that you have the latest iTunes/Finder. Sometimes you need to click on the device icon in the upper-left of the iTunes window.

Frequently Asked Questions

  1. Is downgrading to unsigned iOS legal? Yes, it’s legal in most countries for personal use. It doesn’t circumvent any DRM or security measures; it just installs an older version of the OS.
  2. Will I lose my data? Yes, the downgrade erases your device. You can restore from a backup made before the downgrade, but some data may not be compatible if the backup is from a newer iOS version.
  3. Can I downgrade without a computer? No, you need a computer to run the restore tools.
  4. How long does the process take? The actual restore takes about 10–20 minutes, but preparing the files and troubleshooting can extend it to an hour or more.
  5. Will my apps work after downgrading? Most apps will work, but apps that require a newer iOS version won’t install or may crash. Some apps may also lose data if they were updated to a format incompatible with the older iOS.
  6. Can I downgrade from iOS 17 to iOS 16? Only if you have saved blobs for iOS 16 for your specific device. Apple stops signing older versions quickly, so it’s often impossible without blobs.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →