sodcalculator

10 Tech How-To

How to Draw a Laptop: Step-by-Step Guide

Guide 10-46051 · Updated · Step by step

This guide shows you how to draw a recognizable laptop from a standard three-quarter angle, the view that looks most natural and shows the screen and keyboard at once. You will start with basic shapes, add the screen and keyboard details, then finish with shading and highlights. No prior drawing experience is needed—just follow the steps in order.

What You’ll Need

  • Paper (plain printer paper works fine)
  • A pencil (HB or 2B is ideal)
  • An eraser (kneaded eraser is nice, but a regular one works)
  • A ruler (for straight edges)
  • Optional: colored pencils, markers, or a fine-liner pen for outlining

Step-by-Step

  1. Draw the base rectangle (the keyboard deck). Using your ruler, draw a horizontal rectangle that is wider than it is tall. For a standard laptop, make it about 6 inches wide and 4 inches tall. This rectangle will be the top surface of the keyboard area, so keep it light—you may adjust it later.
  2. Add the screen rectangle. From the back edge of the base rectangle (the top edge if you drew it horizontally), draw a second rectangle going upward and slightly backward. In a three-quarter view, this screen rectangle should be the same width as the base but taller—about 5 inches tall. Tilt it slightly so it looks like the screen is open at an angle, not flat.
  3. Connect the two rectangles. Draw a short vertical line connecting the back corners of the base rectangle to the bottom corners of the screen rectangle. This creates the hinge area. Erase any lines that cross through the middle so the two shapes look joined, not overlapping.
  4. Give the base thickness. Draw a second rectangle slightly below the base rectangle, offset by about a quarter inch. Connect the corners with vertical lines. This creates the bottom half of the laptop body—the part that holds the hardware. Erase the front edge of the top rectangle so you see only the bottom edge.
  5. Draw the screen bezel. Inside the screen rectangle, draw a smaller rectangle, inset by about a quarter inch on all sides. This is the black border around the display. Leave a small gap at the top center for the webcam—a tiny dot or small rectangle.
  6. Add the keyboard. On the top surface of the base, draw a large rectangle that takes up most of the space, leaving about a half-inch margin on the left, right, and front. Inside this rectangle, draw a grid of small squares or rectangles for the keys. You don’t need to draw every key—just a few rows of small squares, with a wider space at the bottom for the spacebar. Keep the lines light.
  7. Add the trackpad. Below the keyboard rectangle, draw a smaller, centered rectangle. This is the trackpad. Make it about a third of the width of the keyboard and about an inch tall. Round the bottom corners slightly for a realistic look.
  8. Refine the screen content. Inside the screen bezel, you can add a simple wallpaper—a gradient, a few shapes, or just leave it blank. If you want to show a window, draw a small rectangle near the top left and a few lines for text. Keep it minimal so it doesn’t distract from the laptop shape.
  9. Erase construction lines. Go over your drawing and erase any stray lines, especially where the screen meets the base and where the base thickness overlaps. Clean up the keyboard grid so it looks neat.
  10. Add shading and highlights. Decide on a light source—usually from the top left. Shade the right side of the laptop body and the screen bezel with light pencil strokes. Add a subtle shadow under the laptop on the table. Use your eraser to lift out a few highlights on the top edge of the screen and the front edge of the base.
  11. Outline (optional). If you want a crisp look, trace over your final lines with a fine-liner pen or a darker pencil. Let the ink dry, then erase any remaining pencil marks.

Common Mistakes

  • Making the screen too wide or too narrow. The screen should be roughly the same width as the base, not wider. If it looks off, check your proportions before adding details.
  • Forgetting the hinge connection. The screen and base need to look physically connected. If you leave a gap or overlap them awkwardly, the laptop looks broken. Draw the hinge line clearly.
  • Drawing the keyboard too large or too small. The keyboard should leave a visible border around it. If it fills the entire base, it looks cramped. Leave at least a half-inch margin on the sides.
  • Using a ruler for everything. The screen bezel and keyboard grid can be drawn freehand for a more natural look. Overly straight, mechanical lines can make the drawing look stiff.
  • Skipping the base thickness. A laptop drawn as just two rectangles looks flat. The bottom half gives it depth and makes it look like a real object.

Tips

  • Start light. Use a light touch with your pencil so you can erase easily. Dark lines are hard to remove and can leave smudges.
  • Use a reference. Look at a real laptop or a photo while you draw. Notice the angles and proportions—this will make your drawing much more accurate.
  • Draw the keyboard as a pattern, not individual keys. Instead of drawing 60 tiny squares, draw a few rows of small rectangles and let the eye fill in the rest.
  • Practice the three-quarter angle. This is the most flattering view for a laptop. If it feels hard, try drawing the laptop straight-on first (screen facing you, base below) and then tilt the screen back.
  • Add a reflection on the screen. A subtle diagonal white line or a lighter rectangle on the screen makes it look like glass. This is a quick way to add realism.
  • Shade in one direction. Use consistent pencil strokes (e.g., all diagonal) to keep your shading smooth and even.

Troubleshooting

  • The screen looks like it’s floating above the base. This usually means the hinge lines are missing or too faint. Go back and draw clear vertical lines connecting the back of the base to the bottom of the screen. Make sure the screen’s bottom edge touches the base’s back edge.
  • The laptop looks too flat. Add more shading. The sides of the base and the area under the screen should be darker. Also, make sure you drew the bottom half of the base—without it, the laptop is just a flat shape.
  • The keyboard looks like a mess of lines. Erase the grid and start over, but this time draw only a few horizontal rows and vertical lines, spaced evenly. You don’t need individual keys—just a suggestion of them. Leave the spacebar area blank.
  • The proportions are wrong (screen too big or too small). Measure with your ruler. The screen height should be about 1.2 to 1.5 times the base height. The width should be the same for both. Adjust by erasing and redrawing the offending rectangle.
  • Your lines are too dark to erase. If you pressed hard, use a kneaded eraser to lift the graphite gently. If that doesn’t work, you may need to start over on a fresh sheet—it’s faster than fighting smudges.
  • The drawing looks crooked. Use a ruler to check that the base and screen edges are parallel to the paper’s edges. If they’re not, you can either rotate the paper or redraw the lines.

Frequently Asked Questions

What is the easiest angle to draw a laptop from?

The straight-on front view (screen facing you, keyboard below) is easiest because it uses simple rectangles. The three-quarter view is more realistic but requires connecting the screen and base at an angle.

Do I need to draw every key on the keyboard?

No. Drawing a grid of small rectangles is enough. The viewer’s brain will read it as a keyboard. Drawing every key is tedious and often makes the drawing look cluttered.

How do I make the screen look like glass?

Add a subtle diagonal highlight—a light line or a lighter rectangle across the screen. Also, leave the screen content slightly lighter than the bezel so it looks like a glowing display.

Can I draw a laptop without a ruler?

Yes, but the edges will be wobbly. If you want a clean look, use a ruler for the main rectangles. For the keyboard keys and screen bezel, freehand is fine.

How do I draw a closed laptop?

Draw a single rectangle for the top (the lid) and a slightly larger rectangle below it for the base. Add a thin line between them to show the seam. Shade the bottom edge for depth.

What if I want to draw a laptop with a touchscreen?

Just make the screen bezel thinner and add a small stylus icon or a hand touching the screen. The overall shape is the same as a regular laptop.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →