How to Draw a Samsung Galaxy Tab S3

This guide shows you how to draw a realistic Samsung Galaxy Tab S3 from scratch, covering the overall shape, screen, bezels, and distinctive details like the camera and speaker grilles. You’ll need a pencil, eraser, ruler, and paper to follow along.

What You’ll Need

• Pencil (HB or 2B for sketching)
• Eraser
• Ruler
• Paper (plain white works best)
• Optional: Fine-tipped pen or marker for outlining

Step-by-Step

1. Draw the outer rectangle. Using a ruler, draw a rectangle with a 4:3 aspect ratio (e.g., 12 cm wide by 9 cm tall). This represents the tablet’s body. Lightly sketch it so you can adjust later.
2. Round the corners. The Galaxy Tab S3 has noticeably rounded corners. Use your eraser to soften each corner, or draw a small arc at each corner to replace the sharp point. Keep the curve even on all four sides.
3. Add the side bezels. Inside the rectangle, draw a smaller rectangle about 5 mm from the left, right, and top edges. This is the display area. Leave the bottom bezel thicker—about 1 cm—to match the Tab S3’s physical design.
4. Sketch the screen. Inside the display rectangle, add a slightly darker fill or draw a subtle diagonal line to indicate the glass. If you want a screen-on look, draw a simple wallpaper or a home screen grid later.
5. Draw the front camera. On the top bezel, centered horizontally, draw a tiny circle (about 2 mm in diameter) for the front camera. Add a smaller dot inside it for the lens.
6. Add the home button. On the bottom bezel, centered, draw a small oval or pill shape. The Tab S3 has a physical home button with a fingerprint sensor—draw a slightly darker oval inside it.
7. Draw the rear camera. Flip the tablet (or draw the back side). On the top-left corner of the back, draw a small square with rounded corners. Inside, add a smaller circle for the camera lens and a tiny dot for the flash.
8. Add the speaker grilles. The Tab S3 has four speakers, one on each corner. On the front view, draw tiny dots or short parallel lines near each corner of the bezel. On the back, add similar dots near the corners.
9. Include the ports and buttons. On the right edge (for the front view), draw a thin rectangle for the power button and two smaller ones for the volume rocker. On the bottom edge, draw a small trapezoid for the USB-C port and a tiny circle for the headphone jack.
10. Refine and darken. Once you’re happy with the proportions, go over the main outlines with a darker pencil or pen. Erase any stray guidelines. Add subtle shading on the edges to give it a 3D feel.

Common Mistakes

• Wrong aspect ratio: The Tab S3 is 4:3, not 16:9. If your rectangle is too wide, it will look like a phone or a different tablet.
• Bezels too thin: The Tab S3 has fairly thick bezels, especially at the bottom. Making them too thin ruins the look.
• Home button too big or small: The home button should be about 10% of the tablet’s width. A common mistake is making it too large.
• Ignoring symmetry: The camera, home button, and speakers should be centered. Use a ruler to measure equal distances from the edges.

Tips

• Use a light touch when sketching so you can erase easily.
• If you want a more realistic look, add a reflection on the screen—a subtle white diagonal streak.
• For the back view, remember the camera is on the top-left (when looking at the back), not the top-right.
• Practice drawing the tablet from different angles (front, back, side) to understand the depth.

Troubleshooting

• My rectangle looks like a square: Measure the sides again. The width should be about 1.33 times the height.
• The screen looks too big: Reduce the size of the inner rectangle. The bezels should be clearly visible.
• Corners are too sharp: Use a coin or a compass to draw a perfect arc for each corner.
• I can’t get the camera centered: Draw a light vertical centerline first, then place the camera on it.
• The drawing looks flat: Add shading on one side of the tablet and a shadow underneath to create depth.

Frequently Asked Questions

Do I need to draw every speaker hole?

No, you can suggest them with a few dots or short lines. Drawing every hole is time-consuming and not necessary for a good result.

Can I draw the Tab S3 without a ruler?

Yes, but it’s harder to keep straight lines. A ruler helps with the rectangular shape and even bezels.

How do I make the screen look like it’s on?

Draw a simple wallpaper (like a gradient or a few icons) inside the screen area. Leave a thin white border to simulate the screen bezel.

What if I want to draw the S Pen?

The S Pen is not part of the tablet body, but you can draw it separately next to the tablet. It’s a thin cylinder with a clip on one end.

Should I outline with a pen?

Only after you’re satisfied with the pencil sketch. Use a fine-tipped pen and let it dry before erasing the pencil lines.

How long does it take to draw?

For a beginner, about 30–45 minutes. With practice, you can do it in 15 minutes.

Related

• Fix Snapchat Camera Blurry or Shaky
• Set Music as Ringtone on iPhone: Easy Steps
• Fix Color Monitor Problems in Windows