sodcalculator

10 Tech How-To

How to Draw an iPhone: Step-by-Step Guide

Guide 10-57502 · Updated · Step by step

This guide shows you how to draw a realistic iPhone from scratch, covering the basic shape, screen, buttons, and details. You’ll learn a simple method that works for beginners and can be adapted to any iPhone model. By the end, you’ll have a clean, recognizable drawing that looks like the real device.

What You’ll Need

  • Paper (printer paper or a sketchbook)
  • Pencil (HB or 2B for sketching)
  • Eraser
  • Ruler (for straight edges)
  • Optional: Fine-tip black pen or marker for outlining
  • Optional: Colored pencils or markers if you want to add color

Step-by-Step

  1. Draw the outer frame. Using a ruler, draw a tall rectangle with rounded corners. The typical iPhone aspect ratio is about 19.5:9, so make the height roughly twice the width. For example, if the width is 5 cm, the height should be about 10 cm. Keep the corners gently curved, not sharp.
  2. Add the screen bezel. Inside the outer rectangle, draw a slightly smaller rectangle, leaving a uniform border (the bezel) around all sides. On modern iPhones, the bezel is thin and even, about 2–3 mm on paper. Use the ruler to keep the lines parallel.
  3. Sketch the screen area. The screen itself is the inner rectangle you just drew. If you want to show the display, you can add a wallpaper or app icons later. For now, keep it blank or lightly shade it to differentiate it from the bezel.
  4. Draw the notch or Dynamic Island. At the top center of the screen, draw a small rounded rectangle for the notch (iPhone X and later) or a pill-shaped cutout for the Dynamic Island (iPhone 14 Pro and later). The notch is about 1/3 the width of the screen; the Dynamic Island is smaller and sits slightly lower.
  5. Add the side buttons. On the left edge, draw a small rounded rectangle for the mute switch (above the volume buttons). On the left side, below the mute switch, draw two separate rounded rectangles for the volume up and down buttons. On the right edge, draw a longer, thinner rectangle for the power button. These should be flush with the outer frame.
  6. Include the camera lenses. In the top-left corner of the back (if drawing the back) or on the back if you’re drawing a front view, you’ll see the camera bump. For a front view, you can skip this. If drawing the back, draw a square with rounded corners in the top-left, and inside it draw two or three circles for the lenses, plus a small circle for the flash.
  7. Refine the corners and edges. Use your eraser to clean up any rough lines. Make sure the corners are consistently rounded. You can use a coin or a compass to trace perfect arcs if needed.
  8. Add details to the screen (optional). If you want a realistic screen, draw a few app icons as small rounded squares in a grid. Add a wallpaper by shading the background with a gradient or drawing a simple image. Keep the icons small and uniform.
  9. Outline with pen (optional). Once you’re happy with the pencil sketch, go over the main outlines with a fine-tip pen. Let the ink dry, then erase the pencil lines underneath.
  10. Shade and color (optional). To give your drawing depth, shade the sides of the phone to suggest the metal frame. If you have colored pencils, you can color the back panel (e.g., black, white, or a color like blue or pink). Add a subtle shadow under the phone to ground it.

Common Mistakes

  • Making the rectangle too squat. iPhones are tall and narrow. If your width is too wide, it will look like a tablet or an older phone.
  • Sharp corners. iPhones have rounded corners; drawing them sharp makes it look like a generic smartphone, not an iPhone.
  • Buttons misaligned. The volume buttons should be parallel to each other and evenly spaced. The power button should be on the opposite side, not on the top or bottom.
  • Forgetting the notch or Dynamic Island. On modern iPhones, the front has a distinctive cutout. Omitting it makes the drawing look like an older model or a generic phone.
  • Screen bezel too thick. Modern iPhones have very thin bezels. If you make the bezel too wide, it will look outdated.

Tips

  • Use a reference image of the specific iPhone model you want to draw. Different models have slightly different camera layouts and button positions.
  • Start with light pencil strokes so you can easily erase and adjust.
  • If you’re drawing the back, remember the camera bump is raised. You can add a slight shadow around it to show depth.
  • For a more realistic look, add a subtle reflection on the screen: a diagonal white streak or a soft gradient.
  • Practice drawing the basic rectangle a few times before adding details. The proportions are key.

Troubleshooting

If your drawing doesn’t look right, check the proportions first. Measure the width and height of your rectangle—if the height is less than 1.8 times the width, it’s too short. Erase and redraw the outer frame. If the buttons look off, compare their positions to a real iPhone image. If the screen looks too small or too large, adjust the bezel thickness. If the corners are uneven, use a ruler to draw a small diagonal line at each corner before rounding them. Finally, if the drawing looks flat, add shading to the sides and a shadow underneath to give it dimension.

Frequently Asked Questions

What is the correct aspect ratio for an iPhone?

Modern iPhones have a display aspect ratio of about 19.5:9. For drawing, make the height roughly twice the width, which is close enough.

Should I draw the front or the back?

It depends on what you want. The front shows the screen and notch, while the back shows the camera lenses and Apple logo. Both are recognizable, but the front is often easier for beginners.

How do I draw the Apple logo?

You can draw the Apple logo by sketching a simple apple shape with a bite taken out of the right side. It’s easier to trace or use a stencil if you want it perfect.

Can I draw an iPhone without a ruler?

Yes, but it’s harder to keep the lines straight. You can use any straight edge, like a book or a card, or freehand if you’re confident.

How do I make the screen look realistic?

Add a wallpaper, app icons, and a slight glare. You can also shade the screen darker at the edges to simulate the curve of the glass.

What if I make a mistake?

Use an eraser to remove the mistake and redraw. If you’re using pen, you can cover it with white-out or start over on a new sheet—practice makes perfect.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →