sodcalculator

10 Tech How-To

Enable & Configure Integrated Graphics in BIOS/UEFI

Guide 10-53015 · Updated · Step by step

Enabling and configuring integrated graphics (iGPU) in your BIOS or UEFI lets you use the graphics processor built into your CPU—useful if you don’t have a dedicated GPU, want to run multiple monitors, or need to troubleshoot display issues. This guide walks you through entering the firmware, locating the correct settings, and making the changes safely. Before you start, confirm your CPU has integrated graphics (most Intel non-F and AMD G-series chips do) and that your motherboard has the appropriate video outputs (HDMI, DisplayPort, etc.).

What You’ll Need

  • A desktop or laptop with a CPU that has integrated graphics
  • Access to the BIOS/UEFI (usually by pressing Del, F2, F10, or Esc during startup)
  • A monitor and cable that connect to your motherboard’s video port (for testing)
  • If you have a dedicated GPU, know its brand (NVIDIA, AMD, Intel) to adjust multi-GPU settings later

Step-by-Step

  1. Enter BIOS/UEFI: Restart your computer. During the boot splash screen, press the key shown on screen (commonly Del, F2, F10, or Esc). On Windows, you can also go to Settings > System > Recovery > Advanced Startup, then choose Troubleshoot > Advanced Options > UEFI Firmware Settings.
  2. Navigate to Graphics Settings: The exact location varies by motherboard, but look for a tab like “Advanced,” “Integrated Peripherals,” or “System Agent Configuration.” On many boards, it’s under Advanced > System Agent (SA) Configuration or Advanced > NB Configuration.
  3. Enable the iGPU: Find a setting named “iGPU,” “Internal Graphics,” “Integrated Graphics,” or “Init Display First.” Set it to Enabled or Auto. If you have a dedicated GPU and want to use both, look for “iGPU Multi-Monitor” or “Always Enable” and turn it on.
  4. Set Primary Display (if needed): If you plan to use the iGPU as your main output, find “Primary Display” or “Init Display First” and select IGFX (or “Onboard”). If you want the dedicated GPU as primary, leave it as PEG (PCIe Graphics).
  5. Adjust Shared Memory (optional): Look for “DVMT Pre-Allocated,” “UMA Frame Buffer Size,” or “Shared Memory.” This sets how much system RAM is reserved for the iGPU. A common value is 128MB or 256MB; you can increase it if you run into performance issues or need more video memory.
  6. Save and Exit: Press F10 (or select “Save & Exit”) and confirm. The system will restart. Connect your monitor to the motherboard’s video port if you enabled the iGPU as primary.
  7. Install/Update Drivers: Once in Windows, download the latest Intel or AMD graphics drivers from the manufacturer’s website. Without drivers, the iGPU may not work at full resolution or may show as a generic VGA adapter.

Common Mistakes

  • Enabling iGPU when the CPU doesn’t support it: Intel CPUs with an “F” suffix (e.g., i5-12400F) lack integrated graphics. Enabling the setting won’t work—you’ll get no signal from the motherboard ports.
  • Forgetting to connect the monitor to the right port: If you set the iGPU as primary, you must plug the monitor into the motherboard’s video output, not the GPU’s. Conversely, if you leave the dedicated GPU as primary, the motherboard ports will stay inactive.
  • Setting shared memory too high: Allocating too much RAM to the iGPU can reduce available system memory, especially on systems with 8GB or less. 256MB is usually plenty for basic tasks.
  • Not updating drivers after enabling: Windows may use a generic driver that limits features. Always install the correct drivers from Intel or AMD.

Tips

  • Use iGPU for troubleshooting: If your dedicated GPU fails, having the iGPU enabled gives you a fallback display output.
  • Multi-monitor setup: Enabling iGPU alongside a dedicated GPU lets you connect extra monitors to the motherboard ports, saving your GPU’s outputs.
  • Check BIOS version: Older BIOS versions might have different menu names. Update your BIOS to the latest version if you can’t find the setting.
  • Reset BIOS if needed: If you make changes that cause a black screen, clear the CMOS by removing the round battery on the motherboard for a minute, or use the jumper/button if present.

Troubleshooting

No display after enabling iGPU: If you set iGPU as primary but plugged the monitor into the GPU, move the cable to the motherboard port. If you still get no signal, reset the BIOS by clearing CMOS.

iGPU not detected in Windows: Check Device Manager under “Display adapters.” If you see a yellow warning, install the correct drivers. Also, ensure the iGPU is actually enabled in BIOS—some boards require “Init Display First” to be set to “IGFX.”

Can’t find the setting: Search your motherboard manual online or use the BIOS search function (often Ctrl+F) to locate “iGPU” or “Integrated Graphics.” Some laptops hide these options; they may be under “Advanced” > “Graphics Configuration.”

Performance issues: If the iGPU is slow, increase shared memory in BIOS, make sure you’re using dual-channel RAM (two sticks), and close background apps. Also, update to the latest chipset drivers.

Frequently Asked Questions

Q: Can I use both integrated and dedicated graphics at the same time?
A: Yes, most modern motherboards allow this. Enable “iGPU Multi-Monitor” in BIOS, then install drivers for both. You can connect monitors to both the motherboard and the GPU.

Q: Does enabling integrated graphics affect performance?
A: It can slightly reduce available system RAM, but the impact is minimal if you have 8GB or more. The iGPU itself doesn’t slow down the CPU.

Q: Why is my integrated graphics not showing in Device Manager?
A: Either the CPU lacks an iGPU, the BIOS setting is off, or the drivers aren’t installed. Check BIOS first, then install the latest Intel or AMD graphics driver.

Q: How much shared memory should I allocate?
A: For everyday use, 128MB or 256MB is fine. For gaming or video editing, you might want 512MB, but remember it’s taken from system RAM.

Q: Will enabling iGPU void my warranty?
A: No, it’s a standard BIOS setting. It’s safe and reversible.

Q: Can I enable integrated graphics on a laptop?
A: Yes, but many laptops have limited BIOS options. If you can’t find the setting, check the manufacturer’s support page for instructions specific to your model.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →