Developer Mode on the Google Pixel and Pixel XL unlocks advanced settings like USB debugging, OEM unlocking, and performance monitoring. This guide walks you through the process, from finding the build number to confirming the Developer options menu appears. You only need your phone, a few minutes, and a steady finger for tapping.
What You’ll Need
- Your Google Pixel or Pixel XL phone
- Access to the Settings app (no root or computer required)
- About 2–3 minutes of uninterrupted time
Step-by-Step
- Unlock your Pixel and open the Settings app. You can find it in your app drawer or by swiping down twice and tapping the gear icon.
- Scroll all the way down and tap About phone. It’s usually the last item in the Settings list.
- Look for the Build number entry. It’s near the bottom, below “Android version” and “Kernel version”.
- Tap the Build number field seven times. You don’t need to wait between taps; just tap rapidly. After the third tap, you’ll see a toast notification saying “You are now 3 steps away from being a developer.” Keep going.
- After the seventh tap, a message will appear: “You are now a developer!” This confirms the unlock process is complete.
- Press the back button once to return to the main Settings screen. You’ll now see Developer options listed near the bottom, just above “About phone”.
- Tap Developer options to open it. The toggle at the top will be off by default; turn it on to activate the menu.
- You’re done! The Developer options menu is now fully accessible. You can adjust settings like USB debugging, OEM unlocking, and animation scales from here.
Common Mistakes
- Counting taps incorrectly: It’s exactly seven taps. Some people lose count and stop at six or go to eight, which either doesn’t trigger the unlock or causes a brief delay before the message appears. If you’re unsure, just start over from the beginning.
- Tapping the wrong item: Make sure you tap “Build number”, not “Android version” or “Kernel version”. Tapping those does nothing related to Developer Mode.
- Not scrolling down in Settings: Developer options won’t appear until you’ve successfully tapped the build number seven times. If you don’t see it, go back and repeat the process.
- Forgetting to toggle it on: After the unlock, the Developer options menu appears but is disabled by default. You must open it and flip the top switch to “On” before any developer settings take effect.
Tips
- If you’re enabling Developer Mode specifically for USB debugging (e.g., to use ADB commands), also enable the USB debugging toggle inside Developer options. It’s usually the first or second item.
- For OEM unlocking (needed to unlock the bootloader), enable the OEM unlocking toggle as well. Note that this may void your warranty and erase your data, so only do it if you’re sure.
- You can hide Developer options again by going to Settings > Apps > Show system, finding “Settings”, clearing its data, and restarting. But this also resets other settings, so only do it if you really want to remove the menu.
- Developer options are stored per user profile. If you use multiple users on your phone, each user needs to repeat the process to access the menu.
Troubleshooting
If the “You are now a developer!” message doesn’t appear after seven taps, try these steps:
- Restart the Settings app: Swipe it away from recent apps and reopen it. Sometimes the UI needs a refresh to show the new menu.
- Check for system updates: Go to Settings > System > System update. If an update is pending, install it first, then retry. Older Android versions had slightly different behavior, though the seven-tap rule has been consistent since Android 4.2.
- Try a different finger or tap speed: Some users report that very slow taps or double-taps can be missed. Use a consistent, moderate tap speed.
- Reboot your phone: A simple restart can clear any temporary glitches that might be preventing the toast notification from appearing.
- Check if you already have Developer options: Sometimes you may have enabled it earlier without realizing. Scroll to the bottom of Settings and look for the entry. If it’s there, just open it and toggle it on.
Frequently Asked Questions
Why do I need to tap the build number seven times?
It’s a deliberate anti-accidental-activation measure. Seven taps is enough to confirm intent without being too tedious for users who genuinely want to access developer settings.
Does enabling Developer Mode void my warranty?
Simply enabling the menu does not void your warranty. However, using certain developer options like OEM unlocking or modifying system settings could, so be careful what you change.
What if I don’t see the Build number option?
Make sure you’re on the “About phone” screen, not “About device” or a submenu. On some Android versions, you may need to tap “Additional information” first. If it’s still missing, check for a system update.
Can I disable Developer Mode later?
Yes. Go to Settings > Developer options and toggle the top switch off. The menu will remain visible but inactive. To completely remove it, you’d need to clear the Settings app’s data, which resets all settings.
Will Developer Mode slow down my phone?
No, not by itself. Some options like “Don’t keep activities” or reducing animation scales can affect performance, but leaving the menu on with default settings has no impact.
Is Developer Mode the same as rooting?
No. Developer Mode gives you access to advanced settings and tools, but it does not give you root access. Rooting is a separate process that involves unlocking the bootloader and flashing a custom kernel or system image.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Gmail Notifications Not Working? Fixes That Work
- Fix Thumbnails Not Showing on Network Drives in Windows 11
- Stop Skype Auto-Start in Windows: 5 Fixes
- SQL Injection Prevention: Step-by-Step Guide
- Fix Windows PowerShell Popping Up
- Print iMessage or Text Conversations on iPhone & iPad