sodcalculator

10 Tech How-To

Enable/Disable Windows To Go with Hibernate on Windows 10

Guide 10-56421 · Updated · Step by step

This guide shows you how to enable or disable Windows To Go on a Windows 10 PC, specifically focusing on making hibernate work with your portable workspace. Windows To Go is a feature that lets you run a full Windows 10 environment from a USB drive, and hibernate allows you to save your session and resume later. You’ll learn the required steps, common pitfalls, and how to fix issues when hibernate doesn’t cooperate.

What You’ll Need

  • A Windows 10 Pro or Enterprise edition PC (Windows To Go is not available on Home).
  • A USB drive that is certified for Windows To Go (at least 32 GB, preferably USB 3.0).
  • Administrator access on the PC.
  • An ISO or installation media for Windows 10 Enterprise (or Pro if you’re using the built-in tool).

Step-by-Step

  1. Create the Windows To Go workspace – Insert your USB drive. Go to Control Panel > Windows To Go (or search for “Windows To Go” in the Start menu). Follow the wizard: select your USB drive, then choose a Windows 10 Enterprise image (ISO or WIM). The wizard will format the drive and copy the system files.
  2. Boot into Windows To Go – Restart your PC and boot from the USB drive (you may need to change the boot order in BIOS/UEFI or use a boot menu key like F12). Windows will start from the USB.
  3. Enable Hibernate in Windows To Go – Once in the Windows To Go environment, open Command Prompt as Administrator. Type powercfg /h on and press Enter. This turns on hibernation.
  4. Verify Hibernate is available – Go to Control Panel > Power Options > Choose what the power buttons do. If “Hibernate” is not listed, click “Change settings that are currently unavailable” and then check the “Hibernate” box. Click Save changes.
  5. Test Hibernate – Save your work, then click Start > Power > Hibernate. The PC should shut down, and when you power it back on and boot from the USB, your session should resume.
  6. Disable Hibernate (if needed) – To turn hibernate off, open Command Prompt as Administrator and type powercfg /h off. This also removes the hibernate option from the Power menu.

Common Mistakes

  • Using a non-certified USB drive – Windows To Go requires a drive that meets performance and capacity standards. A slow or small drive may fail to boot or run poorly.
  • Forgetting to run Command Prompt as Administrator – The powercfg command needs admin rights; otherwise you’ll get an access denied error.
  • Not disabling fast startup – Fast startup can interfere with hibernation on Windows To Go. To disable it, go to Control Panel > Power Options > Choose what the power buttons do > Change settings that are currently unavailable, then uncheck “Turn on fast startup.”
  • Assuming hibernate works on all PCs – Some hardware (especially with certain UEFI settings) may not support hibernation from USB. Check your BIOS/UEFI for “USB wake” or “USB legacy” settings.

Tips

  • Always safely eject the USB drive before removing it, even after a full shutdown.
  • Keep a backup of important files on another drive; Windows To Go can be unstable.
  • If you plan to use hibernate often, ensure your USB drive has enough free space (at least the size of your RAM) for the hibernation file.
  • Use a USB 3.0 or later port for better performance.
  • If you’re using Windows To Go on a Mac, you may need to install additional drivers for hibernate to work.

Troubleshooting

Hibernate option is missing: Run powercfg /h on again, then check the Power Options. If it still doesn’t show, open Device Manager and ensure the “System devices” > “Microsoft ACPI-Compliant Control Method Battery” is enabled.

PC doesn’t boot from USB: Check the boot order in BIOS/UEFI. Disable Secure Boot if it’s enabled, as it may block Windows To Go. Also ensure the USB drive is formatted as NTFS.

Hibernate fails with an error: Try disabling fast startup as described above. Also, update your graphics and chipset drivers from the PC manufacturer’s website.

Windows To Go doesn’t start at all: Recreate the drive using the Windows To Go wizard. If the drive is corrupted, use Disk Management to clean it and start over.

Hibernate works but resume takes too long: This is normal on USB drives. To improve, use a faster USB drive or enable “USB 3.0” in BIOS if available.

Frequently Asked Questions

Can I use Windows To Go on Windows 10 Home?

No, Windows To Go is only available in Windows 10 Pro and Enterprise editions. The feature was deprecated in Windows 10 version 2004, but it still works if you have the necessary ISO.

Does hibernate work on any USB drive?

Hibernate requires the drive to support write caching and have enough space. A certified Windows To Go drive is recommended; otherwise, you may encounter errors.

Will hibernate wear out my USB drive faster?

Yes, hibernation writes a large file (equal to RAM size) to the drive each time. Over time, this can reduce the lifespan of cheaper flash drives. Use a high-endurance USB drive if you plan to hibernate frequently.

Can I disable hibernate permanently?

Yes, run powercfg /h off as administrator. This removes the hibernation file and the option from the Power menu.

Why does my PC not resume from hibernate on Windows To Go?

This can happen if the USB drive is not recognized during boot. Ensure the drive is plugged into a USB port that is active during boot (often a rear port). Also, check BIOS settings for USB legacy support.

Is Windows To Go still supported in Windows 10?

Microsoft deprecated Windows To Go in Windows 10 version 2004, but it remains functional. No new features are being added, and it may be removed in future updates.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →