This guide shows you how to turn on AMD’s FidelityFX Super Resolution (FSR) in Cyberpunk 2077, which gives you a big performance boost by rendering the game at a lower resolution and then upscaling it. You’ll get higher frame rates with a minimal visual hit. You don’t need anything special—just an AMD GPU (RX 5000 series or newer works best, but older models can also benefit) and the latest drivers installed.
What You’ll Need
- Cyberpunk 2077 installed (version 1.5 or later, which includes FSR support)
- An AMD Radeon GPU (RX 5000, RX 6000, RX 7000 series, or newer)
- Latest AMD Adrenalin drivers (update via the Adrenalin software if unsure)
Step-by-Step
- Launch Cyberpunk 2077 and wait for the main menu to load.
- Click Settings in the main menu, then select the Gameplay tab (the one with the controller icon).
- Scroll down to the Performance section. You’ll see a setting called Resolution Scaling. Click on it.
- In the dropdown, choose AMD FidelityFX Super Resolution 2.0 (or 2.1/2.2 if available). This is the DLSS-style upscaler for AMD cards.
- After selecting FSR, a new option appears: AMD FSR 2.0 Quality. Click it and choose a preset:
- Quality – best image quality, moderate performance boost (renders at ~66% resolution).
- Balanced – good balance between quality and performance (~58%).
- Performance – higher frame rates, lower image quality (~50%).
- Ultra Performance – maximum FPS, but noticeably softer image (~33%).
For most systems, Quality or Balanced is recommended.
- If you have a 4K display, you might also see AMD FSR 2.0 Sharpness – leave it at default (0.5) or adjust to your liking. Higher values make the image crisper but can introduce artifacts.
- Click Apply at the bottom of the settings screen.
- Exit the settings and play. You should notice a significant FPS increase. If you want to fine-tune, you can also enable Dynamic FidelityFX Super Resolution which automatically adjusts the resolution scale to hit a target FPS (set the target in the field below it).
Common Mistakes
- Choosing FSR 1.0 instead of 2.0 – FSR 1.0 is a spatial upscaler that looks worse. Always pick FSR 2.0 or later if available.
- Not updating drivers – Older drivers may not expose FSR options correctly or cause crashes. Update via AMD Adrenalin.
- Using FSR with ray tracing on low-end GPUs – FSR helps, but if your GPU is below the minimum spec for ray tracing, you’ll still get poor performance. Consider turning off ray tracing for a smoother experience.
- Setting sharpness too high – This can make the image look oversharpened with halos around objects. Keep it between 0.3 and 0.7.
- Not checking the resolution scale – If you previously set a custom resolution scale, it might override FSR. Make sure it’s set to 100% or the FSR preset you chose.
Tips
- If you have an NVIDIA GPU, you can also use FSR (it’s not exclusive to AMD), but DLSS is usually better quality on NVIDIA cards. This guide is for AMD users who don’t have DLSS.
- Pair FSR with AMD Radeon Anti-Lag (in the Adrenalin software) to reduce input latency, making the game feel more responsive.
- For 1440p monitors, try Balanced – it often looks almost identical to native while giving a big FPS boost.
- If you play in 1080p, avoid Ultra Performance – the image will look too blurry. Stick to Quality or Balanced.
- Use the in-game benchmark (Settings → Gameplay → Benchmark) to compare FPS before and after enabling FSR. It helps you pick the best preset.
Troubleshooting
- FSR option is grayed out – Make sure the game is updated to the latest version. Also, check that your GPU supports FSR (any RX 5000 series or newer should). If it’s still grayed out, try setting Resolution Scaling to a different option (like Off) and then back to FSR.
- Game crashes when enabling FSR – This is usually a driver issue. Update your AMD drivers to the latest version. If it persists, try a clean driver install (use AMD’s Cleanup Utility first).
- No performance improvement – Check if you’re CPU bottlenecked. If your CPU is maxed out, FSR won’t help. Lower other CPU-heavy settings like crowd density or shadow quality. Also, make sure FSR is actually applied – the setting should show a green checkmark.
- Image looks blurry or ghosting – Try a higher quality preset (e.g., Quality instead of Performance). Also, adjust the sharpness slider. If ghosting is severe, try turning on AMD FSR 2.0 Motion Vectors (if available) or disable motion blur in the game.
- FSR causes flickering in menus – This is a known issue in some versions. Try switching to FSR 1.0 temporarily, or update the game. It usually doesn’t affect gameplay.
Frequently Asked Questions
Does FSR work on any AMD GPU?
Yes, FSR works on all AMD GPUs from the RX 5000 series onward, and even on older models like the RX 580 (though performance gains may be smaller). It also works on NVIDIA GPUs, but DLSS is generally better there.
Is FSR the same as DLSS?
No, but they achieve a similar goal. DLSS uses dedicated AI hardware (Tensor Cores) on NVIDIA GPUs, while FSR is a spatial upscaler that works on any GPU. FSR 2.0 uses temporal data and is much closer in quality to DLSS, but not identical.
Will FSR make the game look worse?
At Quality or Balanced presets, the difference is often hard to notice, especially at 1440p or 4K. At Performance or Ultra Performance, you will see a softer image. It’s a trade-off for higher FPS.
Can I use FSR with ray tracing?
Yes, you can. FSR works alongside ray tracing. However, if your GPU is struggling with ray tracing, FSR may not be enough to make it playable. You might need to lower ray tracing settings or turn it off.
Does FSR work in all games?
No, the game must support FSR. Cyberpunk 2077 added FSR support in a patch. Many newer games include FSR, but not all.
Should I use FSR or DLSS if I have an NVIDIA GPU?
If you have an NVIDIA RTX card, DLSS is usually the better choice because it uses dedicated hardware and often produces sharper images. However, if DLSS isn’t available in a game, FSR is a great fallback.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- OneDrive Connection Problem Windows 10: Fixes
- Android Battery Care: 12 Steps to Longer Life
- Could Not Assign Applications Error on MacBook: Fix
- Fix Slow Search on Windows 11: Top Methods
- Customize Mission Control & Desktop Spaces on Mac
- Disable Cortana in Windows 10: Full Guide