sodcalculator

10 Tech How-To

How to Enable Hibernate in Windows (Step-by-Step)

Guide 10-50662 · Updated · Step by step

Hibernate is a power-saving state that saves your open documents and running programs to your hard drive, then shuts down completely. When you turn the PC back on, everything returns exactly as you left it. This guide shows you how to enable Hibernate in Windows 10 and Windows 11, including how to add it to the Start menu and troubleshoot common issues.

What You’ll Need

  • A PC running Windows 10 or Windows 11 (the steps are the same for both).
  • Administrator access to the computer (you’ll need to open Command Prompt as administrator).
  • Enough free disk space on your system drive (typically 5–10 GB, but it varies with RAM size).

Step-by-Step

  1. Check if Hibernate is already available. Click the Start button, then click the Power icon. If you see “Hibernate” in the menu, it’s already enabled—you can skip to the “Tips” section. If not, continue.
  2. Open Command Prompt as administrator. Click the Start button, type cmd, right-click “Command Prompt” in the results, and select “Run as administrator.” Click “Yes” if prompted by User Account Control.
  3. Enable Hibernate. In the Command Prompt window, type the following command and press Enter:
    powercfg /hibernate on
    You won’t see a confirmation message if it succeeds. If you get an error, see the Troubleshooting section below.
  4. Close Command Prompt. Type exit and press Enter, or just close the window.
  5. Verify Hibernate appears. Click Start, then click the Power icon. Hibernate should now be listed. If it’s not, proceed to the next step to add it manually.
  6. Add Hibernate to the Power menu (if needed). Open the Control Panel (type “Control Panel” in the Start search). Click “Hardware and Sound,” then “Power Options.” (In Windows 11, you can also right-click the battery icon in the taskbar and select “Power Options.”)
  7. Choose what the power buttons do. In the left sidebar, click “Choose what the power buttons do.” If the options are grayed out, click “Change settings that are currently unavailable” at the top.
  8. Enable Hibernate in shutdown settings. Scroll down to “Shutdown settings.” Check the box next to “Hibernate.” Click “Save changes.”
  9. Test it. Click Start, then Power, and select “Hibernate.” Your PC will shut down. Turn it back on—your open apps and files should reappear.

Common Mistakes

  • Running Command Prompt without admin rights. The powercfg /hibernate on command requires administrator privileges. If you get “Access denied” or “The requested operation requires elevation,” close and reopen Command Prompt as administrator.
  • Not checking the Power Options checkbox. Even after enabling Hibernate via command line, it may not show in the Start menu until you check the box in Power Options (Step 8).
  • Confusing Hibernate with Sleep. Sleep puts your PC into a low-power state but keeps RAM powered. Hibernate saves to disk and fully powers off. They are different features.
  • Assuming Hibernate is available on all hardware. Some older or incompatible drivers may not support Hibernate. If the command succeeds but Hibernate still doesn’t work, check for driver updates.

Tips

  • Use Hibernate when you won’t use your PC for a long time. It uses zero power while off, so it’s great for laptops on long trips or desktops you won’t use for days.
  • Hibernate vs. Shut Down: Hibernate is faster to resume than a full shutdown and preserves your session. A full shutdown clears RAM and can fix some system issues, so use shutdown occasionally.
  • Hybrid Sleep: On desktops, Windows offers “Hybrid Sleep” (a combination of Sleep and Hibernate). To enable it, go to Power Options > Change plan settings > Change advanced power settings > Sleep > Allow hybrid sleep. This is useful for sudden power loss.
  • Fast Startup: Windows uses a form of Hibernate for its “Fast Startup” feature. If you disable Hibernate, Fast Startup also stops working. If you rely on fast boot, keep Hibernate enabled.
  • Free up disk space: The hibernation file (hiberfil.sys) can be large. To reduce its size, run the command powercfg /h /type reduced as administrator. This limits Hibernate to essential system files only (not your open apps). To restore full Hibernate, use powercfg /h /type full.

Troubleshooting

  • Hibernate doesn’t appear after enabling. First, try the Power Options checkbox method (Step 8). If it’s still missing, your graphics driver may not support Hibernate. Update your GPU driver from the manufacturer’s website. Also, check if your motherboard BIOS has “S3” or “S4” sleep states enabled—Hibernate uses S4.
  • “The system firmware does not support hibernation” error. This usually means your BIOS has ACPI sleep states disabled. Restart your PC, enter BIOS/UEFI (usually by pressing F2, Del, or Esc during boot), find “ACPI Sleep State” or “S4” and set it to “Enabled” or “S3+S4.” Save and exit.
  • Hibernate is enabled but the PC won’t wake properly. This can be caused by outdated chipset drivers or a faulty hibernation file. Try running powercfg /hibernate off as admin, restart, then run powercfg /hibernate on again to recreate the file.
  • Hibernate option is grayed out in Power Options. This is normal until you click “Change settings that are currently unavailable.” If it’s still grayed out after that, your system may have a policy that disables Hibernate. Check with your IT department if this is a work PC.
  • Hibernate uses too much disk space. The hibernation file is roughly 40% of your RAM size. If you have 16 GB RAM, that’s about 6.4 GB. Use the reduced type command mentioned in Tips, or disable Hibernate entirely if you never use it.

Frequently Asked Questions

Why isn’t Hibernate available on my PC?

Hibernate may be disabled by default on some systems, especially if your PC has a SSD and uses “Fast Startup” (which relies on Hibernate). You can enable it using the steps above. If the command fails, your hardware or drivers may not support it.

What’s the difference between Sleep, Hibernate, and Shut Down?

Sleep keeps your session in RAM and uses a small amount of power. Hibernate saves your session to the hard drive and uses no power. Shut Down closes all programs and turns off completely—you’ll have to reopen everything when you start again.

Will Hibernate drain my battery?

No. When your PC is in Hibernate, it’s completely off, so it uses zero battery. That’s why it’s ideal for laptops when you won’t charge them for a while.

Can I use Hibernate on a desktop PC?

Yes, Hibernate works on desktops too. It’s useful if you want to keep your work session intact but don’t want to leave the PC running overnight.

Does Hibernate slow down my PC over time?

No, Hibernate itself doesn’t slow down your PC. However, the hibernation file takes up disk space. If you’re low on space, you can reduce its size or disable Hibernate.

How do I disable Hibernate?

Open Command Prompt as administrator and type powercfg /hibernate off. This will remove the Hibernate option and delete the hibernation file, freeing up disk space.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →