sodcalculator

10 Tech How-To

Enable Memory Integrity in Windows 10: Step-by-Step

Guide 10-46552 · Updated · Step by step

Memory Integrity (also called Hypervisor-protected Code Integrity, or HVCI) is a Windows 10 security feature that uses hardware virtualization to verify that kernel-mode drivers and system files haven’t been tampered with. Enabling it blocks many types of malware and exploits that try to run with kernel privileges. This guide walks you through turning it on in Windows 10, what to check first, and what to do if it won’t enable.

What You’ll Need

  • Windows 10 version 1903 or later (check via Settings > System > About).
  • A 64-bit CPU with virtualization extensions (VT-x for Intel, AMD-V for AMD) and SLAT (Second Level Address Translation). Most CPUs from the last decade have this.
  • Virtualization must be enabled in your computer’s UEFI/BIOS firmware. It’s often off by default on older machines.
  • An administrator account to change the setting.
  • Compatible drivers. Some older or unsigned drivers will block Memory Integrity from turning on.

Step-by-Step

  1. Check if your CPU supports virtualization. Press Ctrl+Shift+Esc to open Task Manager. Go to the Performance tab and select CPU. Look at the bottom-right; it should say “Virtualization: Enabled” or “Disabled”. If it says Disabled, you’ll need to enable it in your BIOS/UEFI first (Step 2). If it says Enabled, skip to Step 3.
  2. Enable virtualization in BIOS/UEFI. Restart your PC and press the key to enter setup (usually Del, F2, F10, or Esc – the key appears on the first screen). Find a setting named “Intel VT-x”, “AMD-V”, “SVM Mode”, or “Virtualization Technology”. Set it to Enabled, save and exit (usually F10). Your PC will restart.
  3. Open Windows Security. Click the Start button, type “Windows Security”, and press Enter. Alternatively, go to Settings > Privacy & Security > Windows Security.
  4. Go to Device Security. In Windows Security, click the shield icon labeled Device security in the left sidebar.
  5. Click “Core isolation details”. Under the “Core isolation” section, click the link that says “Core isolation details”.
  6. Toggle Memory Integrity on. You’ll see a switch labeled “Memory integrity”. Click it to turn it On.
  7. Restart your PC. Windows will prompt you to restart. Save any open work and click Restart now.
  8. Verify it’s on. After restart, go back to Windows Security > Device security > Core isolation details. The Memory integrity switch should show On.

Common Mistakes

  • Forgetting to enable virtualization in BIOS. If the Task Manager shows virtualization as disabled, Memory Integrity won’t work. Many users skip this step and then wonder why the toggle won’t stay on.
  • Assuming all drivers are compatible. Old or unsigned drivers (especially for printers, graphics cards, or older hardware) will block Memory Integrity. Windows will show a warning listing incompatible drivers.
  • Turning it on without checking for driver issues first. It’s better to update drivers before enabling, otherwise you may end up with a black screen or boot loop.
  • Ignoring the “incompatible” warning. If Windows says a driver is incompatible, forcing the toggle on anyway can cause instability.
  • Not restarting after enabling. The setting only takes effect after a full restart.

Tips

  • Update your drivers first. Visit your PC manufacturer’s support page or use Windows Update to get the latest drivers. This reduces the chance of incompatibility.
  • Check for firmware updates. Sometimes a BIOS update adds or improves virtualization support, making Memory Integrity available.
  • Use the Windows Health Check tool. Microsoft provides a “PC Health Check” app that can tell you if your system is ready for core isolation features. It’s not strictly necessary, but helpful.
  • Keep Windows updated. Security features often get improvements and bug fixes via cumulative updates.
  • If you use third-party antivirus, ensure it’s compatible. Some security software may conflict with HVCI. Check your AV vendor’s documentation.

Troubleshooting

  • The toggle is greyed out. This usually means your CPU doesn’t support virtualization or it’s disabled in BIOS. Re-check Task Manager and BIOS settings.
  • After enabling, you get a blue screen or boot loop. Boot into Safe Mode (press F8 or Shift+Restart) and turn Memory Integrity off. Then update/remove the problematic driver and try again.
  • Windows says “Memory integrity can’t be turned on” with a driver list. Open Device Manager (right-click Start > Device Manager), find the listed driver, right-click and choose “Update driver”. If no update is available, uninstall the device and let Windows reinstall it. If that fails, you may need to replace the hardware or its driver.
  • The toggle turns on but reverts to Off after restart. This indicates an incompatible driver is still present. Use the steps above to identify and update it. You can also check the System event log (Event Viewer > Windows Logs > System) for errors mentioning “HVCI” or “Memory Integrity”.
  • Performance seems worse after enabling. HVCI adds a small overhead. If you’re on a low-end system, you may notice a slight slowdown. That’s normal. If it’s severe, you can disable it, but weigh the security trade-off.

Frequently Asked Questions

Does Memory Integrity affect gaming performance?

In most cases, the impact is minimal (1-2% at most). Some older games with anti-cheat drivers may have issues, but most modern games are compatible. If you experience problems, you can temporarily disable it, but remember to re-enable it afterward.

Can I enable Memory Integrity on Windows 10 Home?

Yes, Memory Integrity is available on all editions of Windows 10, including Home. It’s a built-in feature, not exclusive to Pro or Enterprise.

Will Memory Integrity block all malware?

No, it’s not a silver bullet. It blocks a specific class of attacks that try to inject code into the kernel. You still need an antivirus and safe browsing habits.

Why does Windows say my drivers are incompatible?

Drivers that are not digitally signed or that use outdated kernel hooks are incompatible with HVCI. Microsoft requires drivers to be HVCI-compatible. You need to update them to a version that supports it.

Do I need to enable Virtualization-Based Security (VBS) separately?

Memory Integrity is a part of VBS. When you enable Memory Integrity, Windows automatically enables the necessary virtualization components. You don’t need to do anything extra.

Can I use Memory Integrity with third-party antivirus software?

Yes, but the antivirus must be compatible with HVCI. Most major vendors (Bitdefender, Norton, Kaspersky, etc.) have updated their products to work with it. If you’re unsure, check with the vendor.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →