This guide shows you how to open the BIOS (or UEFI firmware settings) on a Windows PC without doing a full restart. Instead of rebooting and pressing a key like Del or F2, you can trigger a direct reboot into the firmware from within Windows itself. This method works on Windows 10 and Windows 11, and it is especially useful when the usual startup key press is too fast to catch or when your keyboard is not recognized early enough.
What You’ll Need
- A PC running Windows 10 or Windows 11 (the steps are nearly identical on both).
- Administrator access to your user account (standard accounts cannot change UEFI settings).
- Your PC must use UEFI firmware. If your system uses legacy BIOS (very old machines), this method may not work; you will need to use the traditional restart-and-press-a-key method instead.
Step-by-Step
- Save any open work and close all applications. This process will restart your computer, so make sure you have saved documents and closed programs to avoid losing data.
- Open the Start menu. Click the Windows icon in the taskbar or press the Windows key on your keyboard.
- Click the Power icon. It is located at the bottom-left of the Start menu (Windows 10) or bottom-right (Windows 11). A small menu will appear with options like Sleep, Shut Down, and Restart.
- Hold down the Shift key on your keyboard. Keep it pressed.
- While holding Shift, click “Restart”. Do not let go of the Shift key until the screen goes black and the PC begins restarting. This is the critical step—it tells Windows to boot into the recovery environment instead of a normal restart.
- Wait for the blue screen. After a moment, your PC will display a blue screen with the text “Choose an option”. At this point, you can release the Shift key.
- Click “Troubleshoot”. This is the second tile on the screen, usually showing a wrench and screwdriver icon.
- Click “Advanced options”. This opens a list of advanced recovery tools.
- Click “UEFI Firmware Settings”. If you do not see this option, your PC may not support this method (see Troubleshooting below).
- Click “Restart”. Your PC will now reboot and enter the BIOS/UEFI setup screen directly. You do not need to press any key during this boot.
Common Mistakes
- Releasing the Shift key too early. If you let go of Shift before the blue “Choose an option” screen appears, Windows will do a normal restart and you will be back at the login screen. Keep holding until you see the blue screen.
- Clicking “Shut Down” instead of “Restart”. The Shift+Restart trick only works with the Restart option. If you shut down and turn the PC back on, you will need to use the traditional key-press method.
- Looking for “BIOS” instead of “UEFI”. Modern PCs use UEFI, but many manufacturers still call it “BIOS” in the menus. The option in Windows will always say “UEFI Firmware Settings”.
- Assuming the key-press method is the only way. Many users try pressing Del or F2 repeatedly during boot and miss the window. This Shift+Restart method is more reliable on modern hardware.
Tips
- Use this method when your keyboard is not detected early. Some USB keyboards are not initialized fast enough during boot, making the Del/F2 key press impossible. The Windows method bypasses this entirely.
- Pin the recovery command for faster access. You can open the recovery environment directly by running
shutdown /r /o /f /t 0in a Command Prompt or Run dialog (Win+R). This does the same thing as Shift+Restart and skips a few clicks. - Know your motherboard’s key anyway. Even with this method, it is worth knowing your BIOS key (usually Del, F2, F10, or Esc). It is useful if Windows ever fails to boot and you need to enter BIOS from a cold start.
- Check your motherboard manual for BIOS update instructions. Once you are in the BIOS, you can update firmware, change boot order, enable virtualization, or adjust fan curves. Make changes carefully and save before exiting.
Troubleshooting
“UEFI Firmware Settings” is missing from Advanced options. This means your PC is not using UEFI, or the option is hidden. If your PC is older and uses legacy BIOS, you must restart and press the BIOS key (Del, F2, etc.) during startup. If your PC is modern, check whether Secure Boot or Fast Startup is interfering. Try disabling Fast Startup in Windows (Control Panel > Power Options > Choose what the power buttons do > Change settings that are currently unavailable > uncheck “Turn on fast startup”) and try again.
The PC restarts normally despite holding Shift. This usually happens if the Shift key is not being registered. Try using a different keyboard, or use the Run command shutdown /r /o /f /t 0 instead. If that command also restarts normally, your Windows installation may have the recovery environment disabled. You can re-enable it by running reagentc /enable in an elevated Command Prompt.
You see “Choose an option” but no “Troubleshoot” tile. This is rare but can happen with heavily customized Windows installations. If the Troubleshoot tile is missing, you will need to use the traditional key-press method to enter BIOS, or use a Windows installation USB drive to access recovery options.
After entering BIOS, you cannot find the setting you need. BIOS interfaces vary greatly by manufacturer. Look for tabs like “Main”, “Advanced”, “Boot”, or “Security”. If you are looking for virtualization, it is usually under “Advanced” or “CPU Configuration”. If you cannot find it, consult your motherboard or PC manufacturer’s manual online.
The PC boots straight to Windows instead of the blue screen. If holding Shift and clicking Restart does nothing, your Shift key might be stuck or the keyboard driver is not responding. Try the Run command method (shutdown /r /o /f /t 0), which does not depend on the Shift key.
Frequently Asked Questions
Q: Is this method safe? Can it damage my PC?
A: Yes, it is completely safe. It simply tells Windows to boot into the built-in recovery environment, which then restarts into the firmware settings. It does not modify any system files or settings.
Q: Does this work on Windows 10 and Windows 11?
A: Yes, the steps are identical on both operating systems. The only requirement is that your PC uses UEFI firmware.
Q: What if my PC uses legacy BIOS instead of UEFI?
A: Then this method will not work. You will see no “UEFI Firmware Settings” option. You must restart and press the BIOS key (usually Del, F2, F10, or Esc) repeatedly during the boot screen.
Q: Can I use this to enter BIOS if Windows is not booting properly?
A: If Windows fails to boot, you will not be able to use this method because it requires Windows to be running. In that case, you will need to use the key-press method or a Windows installation USB drive.
Q: Why does holding Shift make a difference?
A: Holding Shift while clicking Restart is a Windows shortcut that forces the PC to boot into the Windows Recovery Environment (WinRE) instead of a normal restart. From WinRE, you can access the UEFI firmware settings.
Q: I entered BIOS, but how do I get back to Windows?
A: In the BIOS, look for an option like “Save & Exit” or “Exit”. Choose “Exit Saving Changes” if you made changes, or “Exit Discarding Changes” if you did not. The PC will reboot and start Windows normally.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Slow Internet Lag on Samsung Galaxy Note
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step