sodcalculator

10 Tech How-To

How to Exit iTunes Mode on iPhone

Guide 10-48567 · Updated · Step by step

If your iPhone is stuck on a screen that says “Connect to iTunes” or “Recovery Mode,” it won’t boot normally until you exit that mode. This guide walks you through the safe ways to get your iPhone back to a working state, whether the issue was caused by a failed update, a software glitch, or a stuck button combination. You will need a computer with the latest version of iTunes (Windows) or Finder (macOS Catalina or later), and a compatible USB cable.

What You’ll Need

  • A computer (Windows PC or Mac) with iTunes installed, or macOS Catalina or later with Finder.
  • The USB cable that came with your iPhone (or a certified third-party cable).
  • Your iPhone’s passcode, if you have one set.
  • If you plan to restore, you’ll also need your Apple ID password and, if you use two-factor authentication, a trusted device.

Step-by-Step

There are two common scenarios: your iPhone is stuck in Recovery Mode (the screen shows a computer icon and a Lightning cable), or it’s stuck in a loop where it keeps asking to connect to iTunes. Follow the method that matches your situation.

  1. Force restart your iPhone. This is the first thing to try, as it often clears a temporary glitch without needing a computer. The button combination depends on your model:
    • iPhone 8 or later (including SE 2nd gen and newer): Press and quickly release the Volume Up button, then press and quickly release the Volume Down button, then press and hold the Side button until you see the Apple logo. Do not release when you see the “Connect to iTunes” screen — keep holding until the logo appears.
    • iPhone 7 and 7 Plus: Press and hold both the Side button and the Volume Down button simultaneously until the Apple logo appears.
    • iPhone 6s and earlier, and iPhone SE (1st gen): Press and hold both the Home button and the Side (or Top) button simultaneously until the Apple logo appears.
  2. If the force restart works, your iPhone will boot to the home screen. If it doesn’t, move on to the next step.
  3. Connect your iPhone to your computer. Use your USB cable and plug it into a USB port on your computer. If you’re on a Mac with macOS Catalina or later, open Finder. If you’re on a PC or older Mac, open iTunes.
  4. Trust the computer. If prompted on your iPhone, tap “Trust” and enter your passcode. If the screen is unresponsive, skip this step — the computer may still detect the device.
  5. Locate your device in iTunes or Finder. In iTunes, click the device icon that appears in the top-left corner. In Finder, click your iPhone’s name under “Locations” in the sidebar.
  6. Choose “Update” or “Restore.” When your iPhone is in Recovery Mode, you’ll see two options:
    • Update: This reinstalls iOS without erasing your data. It’s the safer choice and should be tried first. It downloads the latest iOS version and installs it over your current system.
    • Restore: This erases your iPhone completely and installs a fresh copy of iOS. Use this only if Update fails, or if you have a recent backup and don’t mind losing data.
  7. Click “Update” first. iTunes or Finder will download the software and attempt to install it while keeping your files. This can take 15–30 minutes depending on your internet speed. Keep the iPhone connected the entire time.
  8. If Update fails, click “Restore.” Confirm that you want to restore. The computer will erase your iPhone and install the latest iOS. After it finishes, your iPhone will restart and show the “Hello” setup screen. You can then restore from a backup or set it up as new.
  9. If your iPhone is stuck in a boot loop (Apple logo appears, then disappears), you may need to put it into Recovery Mode manually first. To do this, connect it to your computer, then force restart it (using the steps above) but do not release the buttons when the Apple logo appears. Keep holding until you see the “Connect to iTunes” screen. Then follow steps 6–8.

Common Mistakes

  • Releasing the buttons too early. During a force restart, you must hold the buttons until the Apple logo appears, not just until the screen goes black. Releasing early can leave the phone in a state where it still shows Recovery Mode.
  • Using a damaged or non-certified cable. A frayed or uncertified cable can cause the connection to drop mid-update, which can corrupt the software. Always use the original cable or an Apple-certified (MFi) one.
  • Choosing “Restore” when you meant “Update.” Restore wipes all data. If you haven’t backed up recently, you’ll lose everything. Always try Update first.
  • Unplugging the phone during the process. Interrupting an update or restore can leave your iPhone in a worse state, possibly requiring a full DFU restore. Leave it connected until the progress bar completes and the phone restarts on its own.
  • Ignoring the “Trust This Computer” prompt. If you tap “Don’t Trust,” the computer won’t be able to communicate with the iPhone, and the update will stall. If you accidentally tap it, unplug, reconnect, and try again.

Tips

  • Back up before you do anything. Even if you’re trying “Update,” it’s wise to have a recent backup. If you can’t back up because the phone is stuck, at least know your Apple ID password so you can restore from iCloud later.
  • Use a wired connection, not Bluetooth. Bluetooth is not supported for this process. Always use a physical USB cable.
  • Close other apps on your computer. A busy computer can slow down the download or cause the connection to time out. Close heavy programs and make sure your computer isn’t set to sleep during the process.
  • Check your internet connection. A stable, fast connection is essential because iTunes/Finder will download the full iOS installer. If your Wi-Fi is flaky, use an Ethernet cable if possible.
  • Try a different USB port. Sometimes a front-panel USB port on a desktop PC doesn’t provide enough power. Use a port directly on the motherboard (usually at the back) or a powered USB hub.

Troubleshooting

If the steps above didn’t work, here’s what to try next.

  • Your computer doesn’t recognize the iPhone. First, try a different cable and a different USB port. Then restart your computer. If you’re on Windows, make sure Apple Mobile Device USB Driver is installed (check Device Manager under “Universal Serial Bus devices”). On a Mac, try a different cable and port. If it still doesn’t show up, your iPhone may be in a deeper state called DFU (Device Firmware Update) mode, which requires a different procedure — see below.
  • Update keeps failing with an error code. Error codes like 4013, 4014, or 9 often indicate a hardware or connection issue. Try a different cable, a different computer if possible, and make sure your computer’s security software isn’t blocking iTunes/Finder. If it persists, the issue may be hardware-related, and you may need to contact Apple Support.
  • Your iPhone is stuck on the Apple logo for over 30 minutes. This usually means the update got stuck. Force restart the iPhone again, then reconnect to your computer and try “Restore” instead of “Update.”
  • Your iPhone is completely unresponsive (black screen). It might be in DFU mode. To exit DFU mode, connect it to your computer, then force restart it (using the button combination for your model) and hold the buttons for about 10 seconds. If the Apple logo appears, it’s out of DFU. If not, you may need to restore it in DFU mode, which is a last-resort fix — look up the exact DFU restore steps for your model.
  • You see a “Connect to Mac” or “Connect to Computer” screen. This is similar to Recovery Mode but specific to newer iOS versions. The same Update/Restore steps in iTunes or Finder apply.
  • Your iPhone is stuck in a boot loop after a failed jailbreak attempt. This is a more complex situation. The standard Update/Restore may not work if the jailbreak modified system files. You may need to put the device into DFU mode and restore it from there, which completely wipes everything.

Frequently Asked Questions

Q: Will “Update” delete my photos and apps?
A: No. “Update” reinstalls the iOS system software while preserving your personal data, including photos, messages, and apps. However, it’s not a substitute for a backup — if something goes wrong during the update, you could still lose data.

Q: How long does it take to exit iTunes mode?
A: A force restart takes about 30 seconds. An Update takes 15–30 minutes, depending on your internet speed and the iOS version. A full Restore may take longer because it erases and reinstalls everything.

Q: Can I exit iTunes mode without a computer?
A: Sometimes. A force restart (the button combination) will exit Recovery Mode if the issue is a temporary glitch. However, if the iPhone is stuck because of a failed update or corrupted system file, you’ll need a computer to reinstall iOS.

Q: What’s the difference between Recovery Mode and DFU mode?
A: Recovery Mode shows a “Connect to iTunes” screen and allows an Update or Restore. DFU (Device Firmware Update) mode has a black screen and is a deeper level of control used to restore firmware when Recovery Mode fails. You can exit Recovery Mode with a force restart; exiting DFU requires a specific button hold.

Q: Will I lose my data if I click “Restore”?
A: Yes, Restore erases everything on the iPhone. If you have an iCloud backup or a backup on your computer, you can restore it after the process completes. If you don’t have a backup, your data will be gone.

Q: My iPhone is stuck in iTunes mode but I don’t know my Apple ID password.
A: You can still perform an Update without your Apple ID password. However, if you need to Restore, you’ll be asked for the Apple ID password associated with the device (due to Activation Lock). If you don’t know it, you’ll need to go through Apple’s account recovery process before you can fully set up the phone.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →