If your AirPods keep disconnecting, won’t pair, or only one side plays audio, this guide walks you through the most effective fixes for iPhone. You’ll start with quick checks and progress to deeper resets, covering everything from Bluetooth glitches to software updates.
What You’ll Need
- Your iPhone (with iOS updated to the latest version)
- Your AirPods and their charging case
- A clean, soft, dry cloth (for cleaning contacts)
- Access to Wi-Fi or cellular data (for software updates)
Step-by-Step
- Check the basics. Make sure AirPods are charged—put them in the case and close the lid for at least 30 seconds. Open the lid near your iPhone and see if the status light flashes. If the light doesn’t appear, charge the case for 15 minutes with a Lightning cable.
- Toggle Bluetooth off and on. Go to Settings > Bluetooth and turn the switch off, wait 5 seconds, then turn it back on. This clears minor radio interference.
- Reconnect manually. In the same Bluetooth menu, tap the “i” icon next to your AirPods name, then tap Connect to This iPhone and choose When Last Connected. If that doesn’t help, tap Forget This Device and confirm.
- Put AirPods back in the case. Close the lid, wait 10 seconds, then open it and hold the setup button on the back of the case until the status light flashes white. Keep the case near your iPhone and follow the on-screen animation to re-pair.
- Reset AirPods completely. With AirPods in the case and the lid closed, press and hold the setup button on the back for about 15 seconds. The light will flash amber, then white. Release the button, then re-pair as in step 4.
- Clean the AirPods and case. Use a dry, lint-free cloth to wipe the speaker meshes, the charging contacts at the bottom of the stems, and the metal contacts inside the case. Do not use water or liquids.
- Update iOS. Go to Settings > General > Software Update. If an update is available, tap Download and Install. AirPods firmware updates usually install automatically when connected to an iPhone with internet.
- Check for automatic ear detection. In Settings > Bluetooth, tap the “i” next to your AirPods. Make sure Automatic Ear Detection is on. If it’s off, audio may pause unexpectedly.
- Reset network settings (last resort). Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This clears all saved Wi-Fi passwords and Bluetooth pairings, so only do this if nothing else worked. You’ll need to re-pair AirPods afterward.
Common Mistakes
- Skipping the reset button hold time. Many users release the button too early. The full 15 seconds is needed to clear the AirPods’ internal memory.
- Forgetting to charge the case. A dead case can’t power the AirPods or initiate pairing. Always check the case battery level first.
- Not checking for iOS updates. Older iOS versions have known Bluetooth bugs that are fixed in later updates. Skipping this step can waste time on other fixes.
- Using water or wet wipes to clean. Moisture can damage the AirPods’ internal components. Always use a dry cloth.
- Ignoring interference sources. Other Bluetooth devices, Wi-Fi routers, or microwaves can disrupt the connection. Move away from them before troubleshooting.
Tips
- Keep AirPods and iPhone close. Bluetooth range is about 30 feet (10 meters) with no obstacles. Walls and pockets can reduce that.
- Use only one AirPod at a time. If both disconnect, try using just the left, then the right, to isolate a hardware issue.
- Check the case’s battery status. Open the lid near your iPhone and look at the battery widget. If the case is below 20%, charge it.
- Restart your iPhone. A simple restart clears temporary software glitches. Press and hold the side button and either volume button, then slide to power off.
- Keep firmware updated. AirPods update automatically when connected to an iPhone with internet. Leave them in the case near the phone for a few hours periodically.
Troubleshooting
AirPods won’t appear in the Bluetooth list. If they don’t show up after resetting, make sure they’re charged and in pairing mode (white light blinking). If they still don’t appear, try pairing with another iPhone or iPad to determine if the issue is with the AirPods or your phone.
Only one AirPod works. Check if the silent AirPod has debris in the mesh. Clean it gently. If that doesn’t help, put both AirPods back in the case, close the lid, wait 30 seconds, then re-pair. If the problem persists, the AirPod may have a hardware fault—contact Apple Support.
Audio cuts out during calls. This is often due to Bluetooth interference or low battery. Turn off Wi-Fi temporarily to see if that helps. Also, check if the microphone is set to the wrong AirPod in Settings > Bluetooth > “i” > Microphone.
AirPods connect but no sound. Check the volume on your iPhone and in the app you’re using. Also, make sure audio is not routed to another device—open Control Center, tap the AirPlay icon, and select your AirPods.
Reset didn’t work. Try resetting network settings as described in step 9. If that fails, restore your iPhone from a backup or as new, but only after backing up your data. If AirPods still fail, they may need service.
Frequently Asked Questions
Why do my AirPods keep disconnecting from my iPhone?
Common causes include low battery, Bluetooth interference, outdated iOS, or a software glitch. Start with the basic steps like toggling Bluetooth and charging the case, then move to resetting.
How do I reset my AirPods to fix connection issues?
Put AirPods in the case, close the lid, wait 30 seconds, then open the lid and hold the setup button on the back for about 15 seconds until the light flashes amber then white. Re-pair with your iPhone.
Will resetting my AirPods erase any settings?
Yes, it clears custom settings like the double-tap actions and ear detection preferences. You’ll need to set them up again after re-pairing.
Can I fix AirPods connection issues without resetting?
Often yes. Try toggling Bluetooth, forgetting the device and re-pairing, cleaning the AirPods, and updating iOS first. Resetting is the last software option.
Why does only one AirPod connect?
This is usually caused by dirt in the speaker mesh or a charging contact issue. Clean both AirPods and the case contacts, then re-pair. If it persists, the AirPod may need service.
Do AirPods work with non-Apple devices?
Yes, they connect via standard Bluetooth, but some features like automatic ear detection and Siri won’t work. For iPhone, follow the steps above for the best experience.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps