sodcalculator

10 Tech How-To

Fix iPad Wi-Fi & Bluetooth Not Working

Guide 10-57181 · Updated · Step by step

If your iPad suddenly won’t join Wi-Fi networks or pair with Bluetooth devices, the issue is usually a temporary software glitch, an incorrect setting, or a conflict that you can resolve in a few minutes. This guide walks you through the most effective fixes, from simple toggles to full network resets, so you can get back online and connected without a trip to the Apple Store.

What You’ll Need

  • Your iPad (any model running iPadOS 15 or later)
  • The Wi-Fi network name and password (if you need to rejoin)
  • The Bluetooth device you’re trying to pair (and its manual, if handy)
  • A stable internet connection for your router (if you need to restart it)

Step-by-Step

  1. Toggle Airplane Mode On and Off. Open Control Center (swipe down from the top-right corner on models without a Home button, or swipe up from the bottom on older models). Tap the airplane icon to turn it on, wait 10 seconds, then tap it again to turn it off. This forces the iPad to re-scan for networks and Bluetooth devices.
  2. Restart Wi-Fi and Bluetooth. In Control Center, tap the Wi-Fi icon and the Bluetooth icon to turn them off, wait a few seconds, then turn them back on. If the icons are grayed out, skip to step 3.
  3. Restart Your iPad. Press and hold the top (or side) button along with either volume button until the power off slider appears. Drag the slider, wait 30 seconds, then press and hold the top button again until the Apple logo appears. A full restart clears minor software hiccups.
  4. Forget and Rejoin the Wi-Fi Network. Go to Settings > Wi-Fi. Tap the i next to your network, then tap Forget This Network. Return to the Wi-Fi list, select your network, and enter the password again. This fixes most connection issues caused by saved network glitches.
  5. Forget and Re-pair the Bluetooth Device. Go to Settings > Bluetooth. Find the device that won’t connect, tap the i icon, then tap Forget This Device. Put the device back into pairing mode (check its manual), then tap it under Other Devices to pair again.
  6. Check Router and Modem. If Wi-Fi still fails, unplug your router and modem for 30 seconds, then plug them back in. Wait for the lights to stabilize (usually 1–2 minutes), then try connecting again. Also verify that other devices can connect to the same network—if they can’t, the problem is your internet service, not the iPad.
  7. Reset Network Settings. Go to Settings > General > Transfer or Reset iPad > Reset > Reset Network Settings. Enter your passcode and confirm. This clears all saved Wi-Fi networks, Bluetooth pairings, and VPN settings, but does not erase your data or media. After the iPad restarts, you’ll need to rejoin Wi-Fi and re-pair Bluetooth devices.
  8. Update iPadOS. Go to Settings > General > Software Update. If an update is available, tap Download and Install. Apple regularly fixes connectivity bugs in system updates.
  9. Check for Carrier Settings Update (Wi-Fi + Cellular models). Go to Settings > General > About. If a carrier settings update is available, a prompt will appear. Follow the on-screen instructions.
  10. Contact Your Internet Provider or Apple Support. If nothing works, the issue may be with your router’s settings (like MAC address filtering) or a hardware problem. Contact your ISP for Wi-Fi issues, or Apple Support for Bluetooth hardware concerns.

Common Mistakes

  • Skipping the Airplane Mode toggle. This simple step often resets the radio stack and is frequently overlooked.
  • Not restarting the router. Many people reset the iPad repeatedly when the real problem is a router that’s been running for weeks.
  • Forgetting to put the Bluetooth device in pairing mode. If the device isn’t discoverable, the iPad won’t see it. Check the device’s manual for the correct pairing button sequence.
  • Using “Reset All Settings” instead of “Reset Network Settings.” The former wipes all your preferences (wallpaper, privacy, etc.), which is unnecessary and more disruptive.
  • Assuming the iPad is broken. Software issues are far more common than hardware failures, especially after an iOS update.

Tips

  • Keep Wi-Fi and Bluetooth enabled by default. Turning them off in Control Center only disconnects until the next day; to fully disable, use Settings. Leaving them on helps automatic reconnection.
  • Use the same Apple ID. If you have multiple Apple devices, ensure they’re signed into the same Apple ID so features like Handoff and Auto-Join work seamlessly.
  • Check for interference. Move your iPad closer to the router or Bluetooth device, and away from microwaves, cordless phones, and thick walls.
  • Reset your router periodically. A monthly restart can prevent many Wi-Fi issues.

Troubleshooting

If Wi-Fi still won’t connect after resetting network settings: Try connecting to a different Wi-Fi network (like a mobile hotspot). If that works, the problem is with your home network. Check if your router uses MAC address filtering—if so, add your iPad’s MAC address (found in Settings > General > About > Wi-Fi Address) to the router’s allowed list.

If Bluetooth still won’t pair: Make sure the other device is fully charged and within range (usually 30 feet). Try pairing with a different device to isolate the problem. If your iPad pairs with other devices but not the one you need, the issue is with that device.

If both Wi-Fi and Bluetooth fail simultaneously: This points to a common hardware or software issue. Try a forced restart (press and release Volume Up, then Volume Down, then hold the top button until the Apple logo appears). If that fails, restore your iPad from a backup using a computer, or contact Apple Support for diagnostics.

Frequently Asked Questions

Will resetting network settings delete my photos or apps?

No. Resetting network settings only clears Wi-Fi passwords, Bluetooth pairings, and VPN configurations. Your photos, apps, and other data remain untouched.

Why does my iPad connect to Wi-Fi but have no internet?

This usually means the router is online but the iPad’s IP address or DNS settings are wrong. Try forgetting the network and rejoining, or restart your router. If the issue persists, check if other devices have internet—if not, contact your ISP.

How do I know if my iPad’s Bluetooth hardware is broken?

If Bluetooth is grayed out in Settings and toggling it does nothing, or if no devices ever appear after multiple resets, it’s likely a hardware issue. Contact Apple Support for a diagnostic test.

Can a VPN app cause Wi-Fi problems?

Yes. VPN apps can interfere with network connections. Try turning off your VPN in Settings > VPN & Device Management and see if Wi-Fi works. If it does, the VPN app may need an update or reinstall.

Why does my iPad keep dropping Wi-Fi after an iOS update?

Software updates can sometimes corrupt network settings. Reset network settings (as described in Step 7) and rejoin your Wi-Fi. If the problem persists, check for another update—Apple often releases bug fixes.

Is there a way to fix Wi-Fi without resetting network settings?

Yes. Try the Airplane Mode toggle, restarting your iPad, and forgetting/rejoining the network first. These less invasive steps resolve many issues. Only reset network settings if those fail.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →