sodcalculator

10 Tech How-To

Fix Android Proximity Sensor Not Working

Guide 10-45888 · Updated · Step by step

If your Android phone’s screen stays on during calls or turns off randomly when you’re not near it, the proximity sensor is likely misbehaving. This guide walks you through the most common fixes, from simple software tweaks to hardware checks, so you can get your phone behaving normally again.

What You’ll Need

  • Your Android phone
  • A soft, dry microfiber cloth
  • Access to your phone’s Settings app
  • Optional: a can of compressed air (for stubborn dust)

Step-by-Step

  1. Clean the sensor area. The proximity sensor is usually located near the earpiece, just above the screen. Gently wipe this area with a dry microfiber cloth. If there’s sticky residue, slightly dampen the cloth with water (not wet) and wipe again, then dry thoroughly. Avoid using cleaning sprays or alcohol, as they can damage the oleophobic coating.
  2. Remove screen protector and case. Many screen protectors, especially thicker glass ones, can block the sensor. Cases with a lip that covers the top edge can also interfere. Temporarily remove both and test if the issue persists. If it works without them, you may need a thinner protector or a case with better cutouts.
  3. Restart your phone. A simple reboot can clear temporary software glitches that may be causing the sensor to malfunction. Press and hold the power button, then select “Restart.”
  4. Check for software updates. Go to Settings > System > System update (or About phone > Software update) and install any pending updates. Manufacturers often fix sensor-related bugs through updates.
  5. Calibrate the sensor (if available). Some phones have a built-in calibration tool. Search your Settings for “proximity sensor” or “calibration.” If you find it, follow the on-screen instructions to recalibrate. If not, you can use a third-party app like “Proximity Sensor Reset” or “Proximity Fix” from the Play Store, but be cautious and read reviews first.
  6. Test in Safe Mode. Booting into Safe Mode disables all third-party apps. If the sensor works in Safe Mode, a downloaded app is likely causing the issue. To enter Safe Mode: press and hold the power button, then tap and hold the “Power off” option until you see a prompt to reboot in Safe Mode. Confirm and test. To exit, simply restart your phone.
  7. Check app permissions. If the issue only occurs in specific apps (like the Phone app), check that the app has permission to access the sensor. Go to Settings > Apps > [App Name] > Permissions and ensure “Phone” or “Sensors” is allowed.
  8. Wipe cache partition. This clears temporary system files without deleting your data. Turn off your phone, then press and hold the Volume Up + Power buttons (or the specific combo for your model) to enter Recovery Mode. Use the volume keys to navigate to “Wipe cache partition” and press the power button to select. Reboot afterward.
  9. Factory reset (last resort). If nothing else works, a factory reset will restore your phone to its original state. Back up your data first! Go to Settings > System > Reset > Erase all data (factory reset). This will likely fix any software-related sensor issues.
  10. Seek professional repair. If the sensor still doesn’t work after a factory reset, it’s likely a hardware problem. Contact your phone manufacturer or a reputable repair service to have the sensor inspected or replaced.

Common Mistakes

  • Using harsh chemicals: Cleaning the sensor with alcohol or ammonia-based cleaners can damage the sensor’s protective coating and make things worse.
  • Ignoring screen protectors: Assuming a screen protector isn’t the problem without testing it first is a common oversight. Always test without it.
  • Skipping Safe Mode: Jumping straight to a factory reset without testing in Safe Mode can waste time and data if a simple app is the culprit.
  • Forcing calibration: Using third-party calibration apps without understanding your phone’s specific sensor type can sometimes cause more issues. Use them cautiously.

Tips

  • Use a thin screen protector: If you need a protector, opt for a thin film or a high-quality glass one designed to be sensor-compatible.
  • Keep the sensor area clean: Regularly wipe the top of your phone to prevent dust and grime buildup.
  • Monitor after updates: After a major OS update, check if the sensor works correctly. If not, report it to the manufacturer.
  • Use a case with proper cutouts: When buying a case, ensure it has a clear opening around the proximity sensor.

Troubleshooting

If you’ve followed the steps and the sensor still isn’t working, here’s what to do:

  • If the sensor works in Safe Mode but not normally: Uninstall recently installed apps one by one, testing after each removal, until the problem stops.
  • If the sensor works after removing the screen protector: You need a new protector. Look for one that explicitly states it doesn’t block the proximity sensor.
  • If the sensor still fails after a factory reset: This strongly indicates a hardware fault. Do not attempt to open the phone yourself unless you have experience, as this can void the warranty. Contact the manufacturer or a certified technician.
  • If the sensor is overly sensitive (screen turns off when you’re not on a call): This can be caused by a faulty sensor or a software bug. Try recalibrating, and if that fails, a factory reset may help. If not, hardware repair is needed.

Frequently Asked Questions

Why does my screen stay on during calls?

The proximity sensor is supposed to turn off the screen when you hold the phone to your ear. If it’s not working, the screen stays on, and you might accidentally press buttons with your cheek. Cleaning the sensor or removing a screen protector often fixes this.

Can a screen protector really block the proximity sensor?

Yes, especially thicker glass protectors or those with a dark tint. The sensor uses infrared light, and if the protector is too thick or opaque, it can absorb or reflect that light, preventing detection. Always test without a protector.

How do I test if my proximity sensor is working?

You can use a diagnostic code (like #*#*0588#*#* on some Samsung models) or a third-party app like “Proximity Sensor Test.” During a call, cover the top of the phone with your hand; the screen should turn off. If it doesn’t, the sensor is likely faulty.

Will a factory reset fix a hardware issue?

No. A factory reset only clears software. If the sensor is physically damaged, a reset won’t help. However, it’s a good final step to rule out any software corruption before seeking repair.

Is it safe to use third-party calibration apps?

Most are safe, but they may not work on all devices. Some require root access, and others might not be compatible with your phone’s sensor. Read reviews and check compatibility before installing. If an app seems to make things worse, uninstall it immediately.

How much does it cost to replace a proximity sensor?

Repair costs vary widely depending on the phone model and whether you go through the manufacturer or a third-party shop. It’s often a relatively inexpensive fix, but it can be more if the entire display assembly needs to be replaced, as the sensor is sometimes attached to it. Get a quote from a reputable repair service.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →