Skullcandy headphones are generally reliable, but Bluetooth pairing and connection issues can still crop up. This guide walks you through the most common fixes, from clearing old pairings to resetting the firmware, so you can get your audio back quickly.
What You’ll Need
- Your Skullcandy headphones (make sure they’re charged)
- The device you want to pair (phone, laptop, tablet)
- Access to the Bluetooth settings on that device
- A small pin or paperclip (for some models with a reset button)
Step-by-Step
- Turn off Bluetooth and turn it back on. On your phone or computer, go to Settings > Bluetooth and toggle it off, wait 10 seconds, then toggle it back on. This clears minor software glitches on the device side.
- Make sure your headphones are in pairing mode. Most Skullcandy models enter pairing mode automatically when you power them on and they aren’t connected to anything. If not, press and hold the power button (or the dedicated Bluetooth button) for 5–10 seconds until the LED flashes red and blue (or white). Consult your manual for the exact button, as it varies by model.
- Forget the device on your phone/computer. In your Bluetooth settings, find your Skullcandy headphones in the list of paired devices, tap the gear icon (or “i” on iOS), and select “Forget This Device.” Then try pairing again from scratch.
- Clear the headphone’s pairing list. If your headphones have paired with many devices before, they might be confused. To clear the list, put the headphones in pairing mode and then press and hold the volume up and down buttons simultaneously for 5–10 seconds until you hear a tone or see the LED flash rapidly. This resets the pairing memory without a full factory reset.
- Perform a factory reset. This is the most thorough fix. The exact method varies by model, but a common method is: with the headphones off, press and hold the power button and the volume up button together for 10–15 seconds until the LED flashes purple or you hear a voice prompt saying “Pairing” or “Reset.” For models with a reset pinhole (like some Crusher Evo), use a paperclip to press the button inside for 5 seconds. Check your manual for the exact reset procedure.
- Re-pair your headphones. After a reset, the headphones will be in pairing mode. On your device, go to Bluetooth settings, and under “Available Devices,” select your Skullcandy headphones. If prompted for a PIN, try “0000” or “1234.”
- Update firmware (if possible). Some Skullcandy models can update their firmware via the Skullcandy app on your phone. Open the app, connect your headphones, and check for updates. Firmware updates can fix Bluetooth bugs.
- Check for interference. Move closer to your device, and away from other electronics like Wi-Fi routers, microwaves, or other Bluetooth devices. Physical obstructions like walls can also weaken the signal.
Common Mistakes
- Not charging the headphones fully. Low battery can cause connection drops or prevent pairing. Always charge to at least 50% before troubleshooting.
- Pairing with the wrong device. If you have multiple devices nearby, your headphones might auto-connect to an old one. Turn off Bluetooth on other devices, or forget the headphones on them.
- Skipping the “Forget” step. Simply turning Bluetooth off and on doesn’t clear the old pairing profile, which can cause conflicts.
- Holding the power button too long. On some models, holding the power button for more than 10 seconds may trigger a factory reset instead of just pairing mode. Read your manual.
- Assuming all models reset the same way. The reset button or button combination differs between Skullcandy models. Always check the manual or the official website for your specific model.
Tips
- Keep your headphones updated. If the Skullcandy app offers firmware updates, install them. They often include Bluetooth stability improvements.
- Use one device at a time. Most Skullcandy headphones support multipoint (connecting to two devices), but it can cause issues. If you’re having problems, disconnect from one device before pairing to another.
- Keep the distance short. Bluetooth works best within 10 meters (30 feet) with a clear line of sight. Keep your phone in your pocket or on the desk nearby.
- Turn off battery saver mode. Some phones’ battery saver features aggressively kill background Bluetooth connections, causing drops. Disable it temporarily to test.
- Note the LED behavior. The LED on your headphones tells you the status: solid blue (connected), flashing red/blue (pairing mode), solid red (charging). Knowing this helps you diagnose.
Troubleshooting
If the headphones still won’t pair after a factory reset: Try pairing with a different device. If they pair with another phone, the issue is with your original device’s Bluetooth stack. Restart your phone or computer, and check for system updates.
If the connection keeps dropping: This is often interference or low battery. Move away from other wireless devices, and fully charge the headphones. Also, check if the issue happens with all devices or just one – if it’s one device, the problem is likely there.
If the headphones are not discoverable at all: Make sure they are in pairing mode (LED flashing). If not, turn them off and on again, then try entering pairing mode again. If they still don’t show up, the Bluetooth antenna might be damaged – contact Skullcandy support.
If you hear audio lag or stutter: This is often due to a weak signal. Move the source device closer, and make sure there’s no metal object between the device and headphones. Also, try disconnecting other Bluetooth devices that might be competing for bandwidth.
If the headphones connect but there’s no sound: Check the volume on both the headphones and the source device. Also, make sure the headphones are set as the active audio output device in your device’s sound settings (especially on computers).
Frequently Asked Questions
Why won’t my Skullcandy headphones enter pairing mode?
Usually because they are already connected to a previous device. Turn off Bluetooth on that device, or hold the power button for 5–10 seconds to force pairing mode.
How do I reset my Skullcandy headphones?
The reset method varies by model. Common methods: hold power + volume up for 10+ seconds, or use a paperclip to press the reset pinhole. Check your manual or the Skullcandy support site for your specific model.
Why do my Skullcandy headphones keep disconnecting?
Possible causes: low battery, Bluetooth interference, or the headphones are too far from the source device. Also, check if your phone’s battery saver is killing the connection.
Can I connect my Skullcandy headphones to multiple devices at once?
Many newer models support multipoint, but it can cause issues. If you’re having trouble, disconnect from one device before pairing to another.
Why is the sound quality poor when connected via Bluetooth?
Bluetooth compresses audio. Make sure you’re using a high-quality codec (like aptX or AAC) if your device supports it. Also, check that the headphones are fully charged – low battery can reduce audio quality.
My Skullcandy headphones are not showing up in Bluetooth settings. What should I do?
Make sure they are in pairing mode (LED flashing). If they still don’t appear, try resetting the headphones and restarting your device. If that fails, the Bluetooth module may be faulty.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Install Custom Recovery on Samsung Galaxy E5
- Fix Administrator Blocked You From Running This App Error
- Fix Google Calendar Not Syncing on iPhone
- Fix Skype Microphone Not Working on Windows