sodcalculator

10 Tech How-To

Fix External Hard Drive Keeps Disconnecting in Windows 10

Guide 10-52763 · Updated · Step by step

If your external hard drive keeps disconnecting and reconnecting while you’re using it on Windows 10, you’re not alone. This guide walks you through the most common causes—power management, USB drivers, cables, and drive health—and gives you clear, step-by-step fixes to make your drive stay connected reliably.

What You’ll Need

  • Administrator access to your Windows 10 PC
  • A different USB cable (if possible)
  • A different USB port (try both USB 2.0 and USB 3.0)
  • Another computer (for testing the drive)

Step-by-Step

Step 1: Check the Physical Connection

  1. Unplug the external drive from the USB port.
  2. Inspect the USB connector and the drive’s port for dust, bent pins, or damage.
  3. Plug the drive directly into a USB port on your computer (avoid hubs, docks, or front-panel ports if possible).
  4. Try a different USB port. If you have both USB 2.0 and USB 3.0 ports, test both.
  5. If you’re using a USB hub, remove it and connect the drive directly. Hubs often cause power issues.

Step 2: Try a Different USB Cable

  1. Replace the USB cable with another one, preferably a shorter, high-quality cable.
  2. If the drive uses a detachable cable (e.g., USB-A to USB-B or USB-C), swap it out.
  3. If the drive has a power adapter, make sure it’s plugged in and the LED on the adapter is lit.

Step 3: Disable USB Power Saving

  1. Press Windows + X and select Device Manager.
  2. Expand Universal Serial Bus controllers.
  3. Right-click each entry that says USB Root Hub or Generic USB Hub and choose Properties.
  4. Go to the Power Management tab.
  5. Uncheck Allow the computer to turn off this device to save power.
  6. Click OK and repeat for all USB hubs.
  7. Restart your computer.

Step 4: Update or Reinstall USB Drivers

  1. Open Device Manager again.
  2. Expand Universal Serial Bus controllers.
  3. Right-click the first USB Root Hub and select Update driver.
  4. Choose Search automatically for drivers. Windows will check online.
  5. Repeat for each USB hub and controller.
  6. If updating doesn’t help, right-click each USB Root Hub and select Uninstall device, then restart your PC. Windows will reinstall them automatically.

Step 5: Change the USB Selective Suspend Setting

  1. Open Control Panel (search for it in the Start menu).
  2. Go to Hardware and Sound > Power Options.
  3. Next to your selected power plan, click Change plan settings.
  4. Click Change advanced power settings.
  5. In the list, find USB settings and expand it.
  6. Expand USB selective suspend setting.
  7. Set both On battery and Plugged in to Disabled.
  8. Click Apply and OK.

Step 6: Check the Drive’s Power Management (if it’s a self-powered drive)

  1. Open Device Manager.
  2. Expand Disk drives.
  3. Right-click your external drive and select Properties.
  4. Go to the Policies tab.
  5. Select Better performance (instead of “Quick removal”).
  6. Click OK.

Step 7: Run Hardware and Devices Troubleshooter

  1. Press Windows + I to open Settings.
  2. Go to Update & Security > Troubleshoot > Additional troubleshooters.
  3. Select Hardware and Devices and run the troubleshooter.
  4. Follow the on-screen instructions.

Step 8: Check Disk Health and Errors

  1. Open File Explorer and note the drive letter of your external drive (e.g., E:).
  2. Press Windows + X and select Command Prompt (Admin) or Windows PowerShell (Admin).
  3. Type chkdsk E: /f /r (replace E: with your drive letter) and press Enter.
  4. If prompted to dismount the volume, type Y and press Enter.
  5. Wait for the scan to complete. This can take a while for large drives.

Step 9: Test the Drive on Another Computer

  1. Connect the external drive to a different computer.
  2. If it works fine there, the issue is likely with your PC’s USB ports or power settings.
  3. If it still disconnects, the drive itself or its enclosure may be failing.

Common Mistakes

  • Using a USB hub or extension cable: These can cause voltage drops, leading to disconnects.
  • Skipping the power management settings: Windows often turns off USB devices to save power, which is a frequent culprit.
  • Not trying a different cable: A damaged cable is a common cause, yet it’s often overlooked.
  • Ignoring the drive’s own power adapter: If your drive has one, it must be plugged in and working.
  • Rushing the driver uninstall: Uninstalling USB drivers is safe, but you must restart afterwards for Windows to reinstall them.

Tips

  • Use the USB port that is directly on the motherboard (usually at the back of the PC) for the most stable connection.
  • Keep your USB drivers updated by running Windows Update regularly.
  • If you’re on a laptop, avoid using the drive on battery power for long transfers; plug the laptop in.
  • For large file transfers, consider using a USB 3.0 port and a USB 3.0 cable to reduce transfer time and heat.
  • If the drive is old, consider backing up important data and replacing it, as intermittent disconnects can be a sign of hardware failure.

Troubleshooting

If the above steps don’t resolve the issue, try these additional checks:

  • Check the Event Viewer: Press Windows + X and select Event Viewer. Go to Windows Logs > System and look for errors with source “Disk” or “USB” around the time of disconnects. This can give you more specific error codes.
  • Disable Fast Startup: Go to Control Panel > Power Options > Choose what the power buttons do. Click Change settings that are currently unavailable, then uncheck Turn on fast startup. Restart your PC.
  • Update the drive’s firmware: Check the manufacturer’s website for firmware updates for your specific external drive model.
  • Try a different USB controller: If you have a PCIe USB card, try using that instead of the motherboard ports.
  • If the drive still disconnects on every computer, it may be failing. Back up your data immediately and consider replacing the drive.

Frequently Asked Questions

Why does my external hard drive disconnect when I transfer large files?

Large transfers draw more power and generate more heat. If the drive is bus-powered (no separate adapter), it may not get enough power from the USB port, causing it to drop. Try using a powered USB hub or a different port.

Can a faulty USB port cause disconnects?

Yes, a damaged or loose USB port can cause intermittent connections. Test the drive in a different port to rule this out.

Is it safe to uninstall USB drivers?

Yes, Windows will automatically reinstall them when you restart your computer. This can fix corrupted drivers.

How do I know if my external drive is failing?

If the drive makes clicking sounds, is not recognized on any computer, or shows errors in chkdsk, it may be failing. Back up your data immediately.

Will disabling USB selective suspend affect other USB devices?

It may slightly increase power consumption, but it won’t harm your devices. It just prevents Windows from cutting power to USB devices temporarily.

Does the length of the USB cable matter?

Yes, longer cables can cause voltage drops, especially with bus-powered drives. Use a cable shorter than 3 feet if possible.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →