sodcalculator

10 Tech How-To

iPhone 13 Stuck on Apple Logo: How to Fix It

Guide 10-51848 · Updated · Step by step

If your iPhone 13 is stuck on the Apple logo and won’t boot past it, you’re dealing with a software or firmware issue that usually can be fixed at home without losing data. This guide walks you through the most effective fixes, from simple force restarts to recovery mode and system recovery tools.

What You’ll Need

  • A computer (Mac or Windows PC) with the latest version of iTunes, or Finder on macOS Catalina or later.
  • A USB to Lightning cable that is known to work (ideally Apple-certified).
  • Stable internet connection to download any required iOS software.
  • Patience – some steps take several minutes.

Step-by-Step

  1. Force Restart Your iPhone 13
    Quickly press and release the Volume Up button, then quickly press and release the Volume Down button. Next, press and hold the Side button (on the right edge) until you see the Apple logo, then release. If the phone boots normally, you’re done. If it stays stuck, proceed to the next step.
  2. Charge Your iPhone for at Least 30 Minutes
    Plug your iPhone into a power source using the cable and adapter. Sometimes a deeply discharged battery can cause the phone to appear stuck on the logo. After 30 minutes, try the force restart again.
  3. Put Your iPhone in Recovery Mode
    Connect your iPhone to your computer with the USB cable. On your computer, open Finder (macOS Catalina or later) or iTunes (Windows or older macOS). With your iPhone connected, perform the force restart sequence (Volume Up, Volume Down, then hold Side) but keep holding the Side button even after the Apple logo appears. Release only when you see the Recovery Mode screen – a computer icon with a cable. On your computer, a dialog should appear offering to Update or Restore.
  4. Choose “Update” First
    Click Update (not Restore) to reinstall iOS while keeping your data. Your computer will download the software and install it. This can take 15 minutes or more. After it finishes, your iPhone should restart and boot normally.
  5. If Update Fails, Try Restore
    If the Update option fails or your iPhone remains stuck, put it back into Recovery Mode and choose Restore. This erases your iPhone and installs a fresh copy of iOS. After the restore completes, set up your iPhone as new or restore from a backup.
  6. Use a System Recovery Tool (If Needed)
    If Recovery Mode doesn’t work or your iPhone keeps exiting it, consider a third-party system recovery tool (like iMyFone Fixppo, Dr.Fone – System Repair, or Reiboot). These tools can fix deeper firmware issues without erasing data in many cases. Download the tool, connect your iPhone, and follow the on-screen instructions to enter Recovery Mode or DFU mode and repair the system.
  7. Try DFU Mode (Last Resort)
    DFU (Device Firmware Update) mode allows your iPhone to connect to iTunes/Finder without loading iOS. To enter DFU on iPhone 13: connect to computer, then press Volume Up, Volume Down, then hold the Side button for 5 seconds. While still holding Side, press and hold Volume Down for 10 seconds. Then release the Side button but keep holding Volume Down for another 5 seconds. If the screen stays black, you’re in DFU. Your computer should show a “Recovery Mode” alert. Then choose Restore. This is more complex; if it doesn’t work, try again or see Apple Support.

Common Mistakes

  • Not holding the Side button long enough – In Recovery Mode, you must keep holding until the computer icon appears, which can take 10-20 seconds.
  • Choosing Restore instead of Update – Restore wipes your data. Always try Update first.
  • Using a faulty cable – A damaged or non-Apple cable can cause connection drops during the process.
  • Interrupting the update/restore – Do not unplug your iPhone during the process; it can cause more severe issues.
  • Assuming it’s a hardware problem – Most stuck-on-logo issues are software-related and fixable with the steps above.

Tips

  • Before trying any fix, back up your iPhone if you can. If you can’t access the phone, try using iCloud backup if you had it enabled.
  • Use a wired connection to your computer rather than Bluetooth or Wi-Fi for the recovery process.
  • Ensure your computer has the latest version of iTunes (or macOS) to avoid compatibility issues.
  • If you’re using a third-party tool, read reviews and choose a reputable one – some free tools may not be reliable.
  • If your iPhone is under warranty or AppleCare+, consider contacting Apple Support before attempting a restore, as it may be covered.

Troubleshooting

What if my iPhone doesn’t enter Recovery Mode?
Make sure you’re using the correct button sequence and timing. If the Apple logo appears and stays, you may have released the Side button too early. Try again, and if it still doesn’t work, try DFU mode. If DFU also fails, your iPhone may have a hardware issue.

What if the Update or Restore gets stuck or fails?
Check your internet connection, try a different USB port or cable, and restart your computer. Then repeat the process. If it fails repeatedly, try using a different computer or contact Apple Support.

What if my iPhone is still stuck after a successful restore?
Restore from a backup, but if the issue persists, it might be a hardware problem. Contact Apple Support or visit an Apple Store for diagnosis.

What if I see an error code (like error 4013 or 9)?
These errors often indicate connection issues or a hardware problem. Try a different cable, port, or computer. If the error persists, it’s likely hardware-related – seek professional help.

Frequently Asked Questions

Will these steps erase my data?

Only the “Restore” option erases your data. The “Update” option attempts to reinstall iOS while keeping your files. Always try Update first.

How long does the Update take?

It can take anywhere from 10 to 30 minutes depending on your internet speed and the size of the iOS update. Do not disconnect during this time.

Can I fix this without a computer?

No, the recovery mode and restore methods require a computer. However, you can try a force restart and charging without a computer first.

What is DFU mode and when should I use it?

DFU (Device Firmware Update) mode is a deeper restore state that doesn’t load iOS. Use it if Recovery Mode fails or your iPhone won’t boot at all. It’s more technical but can fix stubborn issues.

Is this covered by Apple’s warranty?

If the issue is software-related and your iPhone is under warranty, Apple may fix it for free. However, if the problem is from physical damage or liquid damage, it may not be covered.

What if my iPhone is still under warranty and I try this myself?

Attempting a restore yourself does not void your warranty, as long as you don’t physically damage the device. Apple can still help if the issue persists.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →