If your iPhone can’t find your printer, it’s usually a network or settings issue, not a hardware failure. This guide walks you through the most common fixes, from basic checks to advanced resets, so you can get back to printing quickly.
What You’ll Need
- Your iPhone (with iOS 13 or later, ideally)
- The printer’s power cord and access to its control panel
- Your Wi-Fi network name and password
- If using AirPrint, a compatible printer (most modern printers support it)
Step-by-Step
- Check printer power and status. Make sure the printer is turned on, not in sleep mode, and has paper and ink. Look for any error lights or messages on the printer’s display.
- Confirm the printer is on the same Wi-Fi network as your iPhone. This is the most common cause. On the printer’s control panel, find the network or Wi-Fi settings and note the network name (SSID). On your iPhone, go to Settings > Wi-Fi and check which network you’re connected to. They must match exactly (including case and any special characters).
- Restart both devices. Turn off the printer and unplug it for 30 seconds. Then restart your iPhone by holding the side button and either volume button until the power off slider appears. After both are back on, try printing again.
- Enable AirPrint on the printer. If your printer supports AirPrint, make sure it’s enabled in the printer’s network settings. Some printers have a separate AirPrint toggle; others have it always on. Consult your printer’s manual or on-screen menu.
- Add the printer manually in iOS. Go to Settings > Printers (or Settings &em; General > Printers on some iOS versions). Tap Add Printer and wait for your printer to appear in the list. If it doesn’t, tap Not Found? and enter the printer’s IP address. You can find the IP address from the printer’s network settings page.
- Update iOS and printer firmware. Go to Settings > General > Software Update on your iPhone. For the printer, check the manufacturer’s website or the printer’s menu for a firmware update option. Outdated software can cause compatibility issues.
- Reset the printer’s network settings. On the printer, navigate to its network settings and choose “Restore Network Settings” or “Reset Network to Factory Defaults.” Then reconnect the printer to your Wi-Fi using the printer’s setup wizard (usually via WPS or by selecting your network and entering the password).
- Reset your iPhone’s network settings. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This clears saved Wi-Fi passwords and Bluetooth connections—you’ll need to rejoin your Wi-Fi network afterward. This often resolves stubborn connection issues.
Common Mistakes
- Using a guest network. Guest networks often isolate devices, preventing them from communicating with each other. Connect both to the same regular network.
- Printer connected via USB only. AirPrint requires a network connection. If the printer is plugged into a computer via USB, it won’t be discoverable by your iPhone unless that computer is sharing it (and even then, it’s not reliable).
- Ignoring the printer’s display. Many printers show a Wi-Fi icon with bars. If it’s not lit or shows a red X, the printer isn’t connected to Wi-Fi.
- Forgetting to check for multiple printers. If you have more than one printer, make sure you’re selecting the correct one in the print dialog.
Tips
- Use the printer’s IP address directly. If the printer doesn’t appear in the list, add it by IP. This is reliable if the IP is static. You can set a static IP in your router’s DHCP settings.
- Keep both devices close to the router. Weak Wi-Fi signals can cause intermittent issues. Move the printer closer to the router temporarily to test.
- Restart your router. A simple router restart can clear up network glitches. Unplug it for 30 seconds, plug it back in, and wait for it to fully boot.
- Check for iOS updates regularly. Apple frequently fixes bugs related to printing in iOS updates.
Troubleshooting
If you’ve followed all the steps and still can’t find the printer, try these advanced checks:
- Check if your router has client isolation enabled. This feature, sometimes called “AP Isolation” or “Wireless Isolation,” prevents devices on the same network from talking to each other. Log into your router’s admin page and disable it.
- Try a different printer app. Some printer manufacturers have their own apps (e.g., HP Smart, Epson iPrint) that use a different discovery method. If the app finds the printer, the issue is with AirPrint specifically.
- Use a static IP for the printer. If the printer’s IP changes frequently, your iPhone may not find it. Assign a static IP in your router’s DHCP reservation settings.
- Check for firewall or VPN interference. If you have a VPN enabled on your iPhone, it can block local network discovery. Disable it temporarily. Also, some security software on your router may block printing protocols.
- Test with another device. If another phone or tablet can find the printer, the issue is isolated to your iPhone. If no device can find it, the problem is with the printer or network.
Frequently Asked Questions
Why does my iPhone say “No AirPrint Printers Found”?
This message appears when your iPhone cannot detect a printer that supports AirPrint on the same network. Check that the printer is on the same Wi-Fi network, is powered on, and has AirPrint enabled.
Can I print to a non-AirPrint printer?
Yes, you can often print to non-AirPrint printers using the manufacturer’s app (like HP Smart or Canon PRINT) or by using a third-party app that supports your printer model. Some routers also allow USB printers to be shared via the network.
Do I need to install drivers on my iPhone?
No, you don’t need to install drivers for AirPrint printers. AirPrint works without drivers. For non-AirPrint printers, the manufacturer’s app may include the necessary drivers.
Why did my printer work before but now it doesn’t?
This often happens after a Wi-Fi network change (like a new router or password), an iOS update, or a printer firmware update. Restarting all devices and reconnecting the printer to Wi-Fi usually resolves it.
How do I find my printer’s IP address?
Print a network configuration page from the printer’s control panel (usually under Network Settings or Information). The IP address will be listed there. Alternatively, check your router’s connected devices list.
Will resetting my iPhone’s network settings delete my data?
No, it only clears Wi-Fi passwords, Bluetooth connections, and VPN settings. Your photos, apps, and other data are unaffected. You’ll need to re-enter your Wi-Fi password afterward.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- Install Custom Recovery on Samsung Galaxy Trend