If your MacBook won’t wake from sleep, you’re staring at a black screen while the machine hums along. This guide walks you through the most common fixes, from a quick force restart to resetting the System Management Controller (SMC) and adjusting power settings. You’ll need your MacBook, its power adapter, and about 10 minutes.
What You’ll Need
- Your MacBook and its original power adapter
- A clean, flat surface to work on
- Patience — some steps require waiting a minute or two
Step-by-Step
- Force a restart. Press and hold the power button (or Touch ID button on newer models) for 10–15 seconds until the screen goes black and the MacBook shuts off. Wait 5 seconds, then press it again to turn it on. This clears most temporary software glitches.
- Check for external displays and peripherals. Unplug every cable — monitor, USB hub, external drive, even the power adapter. Sometimes a faulty device sends a signal that keeps the MacBook in a weird sleep state. Then press a key or click the trackpad.
- Plug in the power adapter. Connect the MagSafe or USB-C charger. A dead battery is a common cause of a MacBook that appears asleep but won’t wake. Wait 2–3 minutes, then try waking it again.
- Reset the SMC (System Management Controller). This chip controls power, battery, and sleep behavior. The steps depend on your model:
- Apple silicon (M1/M2/M3): Shut down the MacBook completely. Wait 30 seconds. Press and hold the power button for 10 seconds, then release. Wait 5 seconds, then press the power button to turn it on.
- Intel MacBook with T2 chip (2018–2020): Shut down. Press and hold the Control + Option (left side) + Shift (right side) keys for 7 seconds, then also press and hold the power button. Keep all four held for another 7 seconds. Release everything, wait 5 seconds, and press power.
- Older Intel MacBooks (pre-2018): Shut down. Press Shift + Control + Option (left side) and the power button simultaneously for 10 seconds. Release, then press power to start.
- Reset the NVRAM/PRAM (Intel Macs only). This stores display and startup settings. Shut down, then press the power button and immediately hold Command + Option + P + R for about 20 seconds. Release when you hear the startup chime a second time (or see the Apple logo flash twice). Apple silicon Macs don’t need this step.
- Check Energy Saver settings. Open System Settings (or System Preferences) → Battery → Options (or Energy Saver). Set “Turn display off on battery” and “Turn display off when plugged in” to a reasonable time like 5–10 minutes. Disable “Put hard disks to sleep when possible” and “Wake for network access” if they’re on — these can interfere with wake.
- Update macOS. Go to System Settings → General → Software Update. Install any pending updates. Sleep/wake bugs are frequently fixed in point releases.
- Run Apple Diagnostics. Shut down, then press and hold the power button until you see the startup options window (Apple silicon) or press D at startup (Intel). Follow the on-screen prompts to test hardware. If it finds an issue, note the code and contact Apple Support.
Common Mistakes
- Holding the power button too briefly. A quick press just sends another sleep signal. You need the full 10–15 seconds for a forced shutdown.
- Skipping the SMC reset on the wrong model. Using the Intel T2 method on an Apple silicon Mac does nothing. Check your model first (Apple menu → About This Mac).
- Leaving peripherals plugged in. A mouse that moves slightly can wake the MacBook, but a faulty hub can also block wake entirely. Always test with nothing connected.
- Assuming it’s a hardware failure. Most wake issues are software or settings-related. Don’t book a repair before trying the resets and updates.
- Not waiting after plugging in. A deeply discharged battery can take a few minutes before the MacBook responds to a power button press.
Tips
- Use “Prevent automatic sleeping” for long tasks. In System Settings → Battery → Options, you can enable “Prevent automatic sleeping on power adapter when the display is off.” This keeps the Mac awake for downloads or renders while the screen sleeps.
- Set a hot corner for display sleep. System Settings → Desktop & Dock → Hot Corners. Assign the bottom-right corner to “Put Display to Sleep.” This is more reliable than closing the lid for quick breaks.
- Keep macOS updated. Enable automatic updates in System Settings → General → Software Update → Automatic Updates. Sleep bugs are often fixed silently.
- Use the “pmset” command for advanced control (advanced users). Open Terminal and type
pmset -gto see current power settings. You can change sleep behavior with commands likesudo pmset -a displaysleep 5(5 minutes). Be careful — wrong settings can cause more issues.
Troubleshooting
If the MacBook still won’t wake after a force restart: Try starting in Safe Mode. Shut down, then press and hold the power button until you see “Loading startup options” (Apple silicon) or hold Shift at startup (Intel). Safe Mode loads only essential drivers. If it wakes fine in Safe Mode, a third-party app or login item is the culprit. Check System Settings → General → Login Items and remove suspicious entries.
If the screen is black but the MacBook is warm and fans are spinning: The display may be asleep while the system is awake. Close the lid, wait 30 seconds, then open it. If that fails, try connecting an external monitor. If the external display shows your desktop, the internal display or its cable may have failed.
If the MacBook shuts down instead of sleeping: This is often a battery health issue. Check System Settings → Battery → Battery Health. If it says “Service Recommended,” the battery may not hold enough charge to maintain sleep. Keep it plugged in and consider a battery replacement.
If the issue happens only when on battery: Go to System Settings → Battery → Options and check “Low Power Mode.” This reduces background activity but can also cause wake delays. Try turning it off. Also check if “Put hard disks to sleep when possible” is enabled — disable it.
If nothing works: Back up your data (Time Machine) and try reinstalling macOS. Shut down, then hold Command + R at startup to enter Recovery Mode. Choose “Reinstall macOS” — this preserves your files but replaces the system software. If the problem persists after a clean install, it’s likely hardware, and you should contact Apple Support or an Authorized Service Provider.
Frequently Asked Questions
Why does my MacBook wake up but the screen stays black? This usually means the display backlight isn’t turning on, not that the Mac is asleep. Try adjusting brightness with the F2 key (or the Touch Bar). If that doesn’t help, the display cable may be loose or damaged.
How do I know if my MacBook has an Apple silicon or Intel chip? Click the Apple menu → About This Mac. If you see “Chip” with a name like M1 or M2, it’s Apple silicon. If you see “Processor” with an Intel name, it’s Intel. This determines the correct SMC reset method.
Will resetting the SMC erase my data? No. Resetting the SMC or NVRAM only clears temporary hardware settings like fan speed, display brightness, and power management. Your files, apps, and settings remain untouched.
Can a faulty charger cause wake issues? Yes. A damaged or non-Apple charger can deliver unstable power, which confuses the sleep/wake logic. Always use the original charger or a certified third-party one, and check the cable for fraying.
How do I prevent this from happening again? Keep macOS updated, avoid force-quitting during sleep, and don’t let the battery drain completely. Also, periodically restart your MacBook (once a week is fine) to clear accumulated background processes.
Is it safe to close the lid while the MacBook is updating? Not recommended. During a macOS update, closing the lid can interrupt the installation and cause boot issues. Always let updates finish before closing the lid.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Disable Autocorrect on iPhone or iPad: Quick Guide
- Custom Keyboard Shortcuts on Windows 11 & macOS
- Restore Windows 11 Display Scaling to Recommended
- Semiconductor Cycle: How Investors Track It0.0
- Microsoft Store Error 0x80073d12: Fixes That Work
- View Notification Count on iPhone: Full Guide