Network connection problems in Windows 10 can appear suddenly—Wi-Fi drops, Ethernet shows “Unidentified network,” or the internet just stops working. This guide walks you through the most effective fixes, from simple restarts to command-line resets, so you can get back online quickly. No special tools are needed; just follow the steps in order.
What You’ll Need
- Administrator access to your Windows 10 PC
- Your router and modem (to restart them)
- An Ethernet cable (optional, for testing)
Step-by-Step
- Restart your PC and network devices. Turn off your computer, unplug your modem and router, wait 30 seconds, plug them back in, and wait for them to fully power up (lights stabilize). Then turn on your PC and check if the connection works.
- Check physical connections. If using Ethernet, ensure the cable is firmly plugged into both the PC and the router/modem. If using Wi-Fi, make sure Wi-Fi is turned on (check the action center or keyboard toggle) and that you are connected to the correct network.
- Run the Windows Network Troubleshooter. Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters. Select Internet Connections and run it. Follow the prompts. Also run the Network Adapter troubleshooter from the same list.
- Disable and re-enable the network adapter. Press Windows + X and select Device Manager. Expand Network adapters, right-click your active adapter (Wi-Fi or Ethernet), and choose Disable device. Wait 5 seconds, then right-click again and select Enable device.
- Release and renew IP address (command line). Search for cmd, right-click Command Prompt, and select Run as administrator. Type the following commands, pressing Enter after each:
ipconfig /release
ipconfig /renew
This forces your PC to request a new IP address from the router. - Flush DNS cache. In the same Command Prompt, type
ipconfig /flushdnsand press Enter. This clears corrupted DNS entries that may cause browsing issues. - Reset Winsock and TCP/IP stack. In the same admin Command Prompt, run:
netsh winsock reset
netsh int ip reset
Restart your PC after these commands. - Update network driver. Open Device Manager, right-click your adapter, and select Update driver > Search automatically for drivers. If Windows finds nothing, go to your PC or adapter manufacturer’s website and download the latest driver manually.
- Check for Windows updates. Go to Settings > Update & Security > Windows Update and click Check for updates. Install any pending updates and restart.
- Run network reset (last resort). Go to Settings > Network & Internet > Status and click Network reset. Confirm and restart. This reinstalls all network adapters and resets network settings to default. You’ll need to reconnect to Wi-Fi afterward.
Common Mistakes
- Skipping the router restart. Many issues are fixed by simply power-cycling the modem/router. Do this first.
- Running commands without administrator rights. Commands like
netshfail if you don’t open Command Prompt as administrator. - Not restarting after driver updates. Driver changes often require a reboot to take effect.
- Using the wrong adapter. If you have both Wi-Fi and Ethernet, make sure you are troubleshooting the one you’re actually using.
Tips
- Use the Network Reset feature only after trying other fixes, as it removes saved Wi-Fi networks and VPN settings.
- If you have a VPN or proxy enabled, temporarily disable it to see if it’s causing the issue.
- Check if other devices on the same network are working. If they aren’t, the problem is likely your router or ISP, not your PC.
- Keep your network driver updated regularly to avoid compatibility issues.
Troubleshooting
If the steps above don’t work, try these additional checks:
- Test with a different device. If other devices connect fine, the issue is isolated to your PC. If not, restart the router again and contact your ISP.
- Try a different network. Connect your PC to a mobile hotspot or a different Wi-Fi network. If that works, the problem is with your original network’s configuration.
- Check for IP conflicts. In Command Prompt (admin), type
ipconfigand look at the IPv4 address. If it starts with 169.254, your PC didn’t get a valid IP—try the release/renew step again or check your router’s DHCP settings. - Disable IPv6 temporarily. Go to Control Panel > Network and Sharing Center > Change adapter settings, right-click your adapter, select Properties, uncheck Internet Protocol Version 6 (TCP/IPv6), and click OK. Some networks have IPv6 issues.
- Use System Restore. If the problem started recently, restore your PC to a point before the issue occurred. Search for “Create a restore point” and follow the prompts.
Frequently Asked Questions
Why does my Wi-Fi keep disconnecting?
This is often caused by power management on the Wi-Fi adapter. Go to Device Manager, right-click your adapter, select Properties, go to the Power Management tab, and uncheck “Allow the computer to turn off this device to save power.”
What does “Unidentified network” mean?
It means Windows can’t get a valid IP address from the router. Restart the router, then run the ipconfig /release and ipconfig /renew commands as administrator.
Will network reset delete my files?
No, it only resets network settings. It removes saved Wi-Fi networks and VPN connections, but your personal files are untouched.
How do I know if my network driver is outdated?
Open Device Manager, right-click your adapter, select Properties, and go to the Driver tab. The driver date and version are listed there. Compare with the manufacturer’s website.
Can a VPN cause network issues?
Yes. VPN software can interfere with network settings. Disable the VPN and test the connection. If it works, reconfigure the VPN or try a different server.
Why does my Ethernet work but not Wi-Fi?
This suggests the Wi-Fi adapter or its driver is the problem. Try updating the Wi-Fi driver, and check if the Wi-Fi adapter is enabled in Device Manager. Also, check if airplane mode is on.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Thumbnails Not Showing on Network Drives in Windows 11
- Stop Skype Auto-Start in Windows: 5 Fixes
- Gmail Notifications Not Working? Fixes That Work
- SQL Injection Prevention: Step-by-Step Guide
- Fix Windows PowerShell Popping Up
- Print iMessage or Text Conversations on iPhone & iPad