sodcalculator

10 Tech How-To

How to Fix No Sound on iPad: Step-by-Step

Guide 10-47412 · Updated · Step by step

This guide walks you through the most common reasons an iPad suddenly has no sound and the exact fixes for each. You’ll check the obvious controls first, then move through settings, hardware, and software resets until the audio is back.

What You’ll Need

  • Your iPad
  • Access to Settings app
  • A soft cloth (for cleaning the speaker grilles)
  • Optional: a toothpick or wooden cocktail stick (for gently clearing debris)

Step-by-Step

  1. Check the Silent switch (older iPads). On iPads with a physical switch on the side above the volume buttons, flip it toward the front of the iPad to ensure it’s not showing an orange dot. If it’s orange, silent mode is on and no sounds will play.
  2. Check the volume level. Press the volume up button a few times. Look for the volume indicator on screen; if it’s very low or muted, raise it. Also, go to Settings > Sounds and drag the Ringer and Alerts slider to about 70% or higher.
  3. Turn off Do Not Disturb / Focus. Swipe down from the top-right corner to open Control Center. Tap the crescent moon icon (Focus) to disable it. If it’s purple or highlighted, Focus is active and may be silencing notifications and calls.
  4. Check if Bluetooth is sending audio elsewhere. Open Control Center and tap the Bluetooth icon to turn it off completely. Then try playing something. If sound returns, your iPad was connected to a Bluetooth speaker or headphones. Reconnect later if you want, but for now, this confirms the issue.
  5. Remove any connected headphones. If you use wired headphones, unplug them. If the iPad thinks headphones are still plugged in (even when they aren’t), audio will route to them. Check the volume indicator: if it shows a headphone icon, that’s the problem.
  6. Restart the iPad. Press and hold the top button plus either volume button until the power off slider appears. Slide to power off, wait 30 seconds, then press and hold the top button to turn it back on.
  7. Check the app’s own mute settings. Some apps (like video players, games, or social media) have their own volume or mute controls. Open the app, look for a speaker icon or a settings gear, and make sure it’s not muted.
  8. Clean the speaker grilles. The speakers are at the bottom edge (and sometimes top edge) of the iPad. Gently brush them with a soft, dry toothbrush or a wooden toothpick to remove lint or debris. Do not use liquids or compressed air.
  9. Update iOS. Go to Settings > General > Software Update. If an update is available, download and install it. Updates often fix audio bugs.
  10. Reset all settings. Go to Settings > General > Transfer or Reset iPad > Reset > Reset All Settings. This does not erase your data, but it resets Wi-Fi passwords, Bluetooth connections, and sound settings. You’ll need to re-enter Wi-Fi passwords afterward.

Common Mistakes

  • Forgetting the Silent switch: On older iPads, this switch is easy to flip accidentally. Always check it first.
  • Assuming the volume buttons control media: The physical buttons control the ringer volume by default. If you’re playing music, you may need to adjust the volume from within the app or use Control Center’s volume slider.
  • Not checking Bluetooth: Many people forget they paired their iPad with a Bluetooth speaker earlier. The iPad will send audio there even if the speaker is off and in another room.
  • Using a case that covers the speakers: Some thick cases or magnetic covers can muffle the sound. Remove the case and test.
  • Cleaning with liquids: Water or cleaning sprays can damage the speakers. Use only dry methods.

Tips

  • Use the Control Center volume slider: Swipe down from the top-right corner, and you’ll see a volume slider. This is the quickest way to raise volume for any app.
  • Test with multiple sources: Try playing music from Apple Music, a YouTube video, and a ringtone. If only one app is silent, the problem is in that app, not the iPad.
  • Check the mute icon in the video: Many video apps have a small speaker icon that toggles mute. Tap it to unmute.
  • Keep the speaker grilles clear: Regularly brush them with a soft toothbrush to prevent buildup.
  • Use the Hearing aid compatibility setting: If you use hearing aids, go to Settings > Accessibility > Hearing Devices and make sure the hearing aid is not set to a mode that mutes the iPad speaker.

Troubleshooting

If you’ve followed all the steps above and still have no sound, try these additional checks:

  • Force restart: Press and quickly release the volume up button, then the volume down button, then press and hold the top button until the Apple logo appears. This is different from a normal restart and can clear deeper software glitches.
  • Check for water damage: If the iPad got wet, the speakers may be damaged. Look for the Liquid Contact Indicator (a small white or red dot in the SIM card slot or charging port). If it’s red, the device has been in contact with liquid, and you may need service.
  • Test with a different app: If no app produces sound, the hardware may be faulty. If only one app is silent, delete and reinstall that app (make sure you have backups).
  • Restore from backup (last resort): Back up your iPad, then go to Settings > General > Transfer or Reset iPad > Erase All Content and Settings. Set up as new (without restoring from backup) and test the sound. If sound works, the issue was in your backup. You can then restore from the backup and repeat the erase if needed.
  • Contact Apple Support: If none of this works, the speaker hardware is likely faulty. Make an appointment at an Apple Store or contact Apple Support online. Do not attempt to open the iPad yourself.

Frequently Asked Questions

Why is my iPad silent even though the volume is up?

Most often it’s because the Silent switch is on (older iPads), Bluetooth is sending audio to a device you can’t hear, or the app itself is muted. Check each of those first.

How do I turn off silent mode on iPad?

On iPads with a side switch, flip it so the orange dot is not visible. On newer iPads without a switch, there is no dedicated silent mode; instead, use the volume buttons and the mute toggle in Control Center (the bell icon).

Why does my iPad have sound in headphones but not through the speaker?

This usually means the iPad thinks headphones are still plugged in, or the speaker is damaged. Try plugging and unplugging headphones a few times, clean the headphone jack (if present), and restart the iPad.

Can a case cause no sound on iPad?

Yes, some cases cover the speaker grilles or muffle them. Remove the case and test. Also, magnetic cases can interfere with the iPad’s sensors, which might affect audio routing.

Will resetting all settings delete my apps?

No, Reset All Settings only resets system settings like Wi-Fi, Bluetooth, and sound preferences. Your apps, photos, and data remain intact. You will need to re-enter Wi-Fi passwords and re-pair Bluetooth devices.

How do I know if my iPad speaker is physically damaged?

If you’ve tried all software fixes and there’s still no sound, try playing audio with the volume at maximum. If you hear crackling, distortion, or nothing at all, the speaker may be damaged. Check the Liquid Contact Indicator; if it’s red, water damage is likely.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →